基于Kalman滤波的变体飞行器T-S模糊控制

针对变体飞行器的跟踪控制问题,提出了一种基于Kalman滤波的T-S模糊控制方法。考虑飞行器系统状态不可测,引入惯导数据作为辅助信息,利用Kalman滤波算法融合飞控信息与惯导信息实现状态估计。由于变体飞行器在不同变形结构下气动特性变化较大,为便于控制器设计,采用小扰动线性化方法得到飞行器在不同平衡点处的局部线性模型,并通过状态反馈方法设计局部控制器,局部线性模型和局部控制器通过模糊集和模糊规则聚合成一个连续光滑的全局T-S模糊模型和T-S模糊控制器。通过综合Kalman滤波器与T-S模糊控制器得到一个基于Kalman滤波的T-S模糊控制器。仿真结果表明,该控制器在变形过程中能够实现状态估计,保证飞机的跟踪性能。     

Advances in critical technologies for hypersonic and high-enthalpy wind tunnel

Hypersonic and high-enthalpy wind tunnels and their measurement techniques are the cornerstone of the hypersonic flight era that is a dream for human beings to fly faster, higher and further. The great progress has been achieved during the recent years and their critical technologies are still in an urgent need for further development. There are at least four kinds of hypersonic and high-enthalpy wind tunnels that are widely applied over the world and can be classified according to their operation modes. These wind tunnels are named as air-directly-heated hypersonic wind tunnel, light-gas-heated shock tunnel, free-piston-driven shock tunnel and detonation-driven shock tunnel, respectively. The critical technologies for developing the wind tunnels are introduced in this paper, and their merits and weakness are discussed based on wind tunnel performance evaluation. Measurement techniques especially developed for high-enthalpy flows are a part of the hypersonic wind tunnel technology because the flow is a chemically reacting gas motion and its diagnosis needs specially designed instruments. Three kinds of the measurement techniques considered to be of primary importance are introduced here, including the heat flux sensor, the aerodynamic balance, and optical diagnosis techniques. The techniques are developed usually for conventional wind tunnels, but further improved for hypersonic and high-enthalpy tunnels. The hypersonic ground test facilities have provided us with most of valuable experimental data on high-enthalpy flows and will play a more important role in hypersonic research area in the future. Therefore, several prospects for developing hypersonic and high-enthalpy wind tunnels are presented from our point of view.     

Sensitivity analysis of flowfield modeling parameters upon the flow structure and aerodynamics of an opposing jet over a hypersonic blunt body

Implementation of an opposing jet in design of a hypersonic blunt body significantly modifies the external flowfield and yields a considerable reduction in the aerodynamic drag. This study aims to investigate the effects of flowfield modeling parameters of injection and freestream on the flow structure and aerodynamics of a blunt body with an opposing jet in hypersonic flow. Reynolds-Averaged Navier-Stokes (RANS) equations with a Shear Stress Transport (SST) turbulence model are employed to simulate the intricate jet flow interaction. Through utilizing a Non-Intrusive Polynomial Chaos (NIPC) method to construct surrogates, a functional relation is established between input modeling parameters and output flowfield and aerodynamic quantities in concern. Sobol indices in sensitivity analysis are introduced to represent the relative contribution of each parameter. It is found that variations in modeling parameters produce large variations in the flow structure and aerodynamics. The jet-to-freestream total-pressure ratio, jet Mach number, and freestream Mach number are the major contributors to variation in surface pressure, demonstrating an evident location-dependent behavior. The penetration length of injection, reattachment angle of the shear layer, and aerodynamic drag are also most sensitive to the three crucial parameters above. In comparison, the contributions of freestream temperature, freestream density, and jet total temperature are nearly negligible.     

Water takeoff performance calculation method for amphibious aircraft based on digital virtual flight

Owing to the strong coupling among the hydrodynamic forces, aerodynamic forces and motion of amphibious aircraft during the water takeoff process, the water takeoff performance is difficult to calculate accurately and quickly. Based on an analysis of the dynamics and kinematics characteristics of amphibious aircraft and the hydrodynamic theory of high-speed planing hulls, a suitable mathematical model is established for calculating the hydrodynamics of aircraft during water takeoff. A pilot model is designed to illustrate how pilots are affected by the lack of visual reference and the necessity to simultaneously control the pitch angle, flight velocity and other parameters during water takeoff. Combined with the aerodynamic model, engine thrust model and aircraft motion model, a digital virtual flight simulation model is developed for amphibious aircraft during water takeoff, and a calculation method for the water takeoff performance of amphibious aircraft is proposed based on digital virtual flight. Typical performance indicators, such as the liftoff time and liftoff distance, can be obtained via digital virtual flight calculations. A comparison of the measured flight test data and the calculation results shows that the calculation error is less than 10%, which verifies the correctness and accuracy of the proposed method. This method can be used for the preliminary evaluation of airworthiness compliance of amphibious aircraft design schemes, and the relevant calculation results can also provide a theoretical reference for the formulation of flight test plans for airworthiness certification.     

基于火箭橇的无人机碰撞民用飞机试验技术研究

无人机碰撞民用飞机关键部位损伤程度的研究是民航领域关注的新型热点问题。本文首次提出采用 火箭橇试验评估无人机碰撞民用飞机的安全性。通过对碰撞速度、碰撞位置、无人机姿态、参数测量等进行研 究,设计碰撞技术方案,论述火箭橇的设计、弹道控制设计、强度校核和测试方案,并进行试验验证和仿真计算。 结果表明:本文设计的火箭橇碰撞试验方案是可行的,实现了单一弹道上的连续多点碰撞及多视角、全覆盖、高 稳定的全过程记录;可为后续开展同类碰撞试验提供必要的技术参考,所开展的多发次碰撞试验也为无人机碰 撞民用飞机的安全性评估提供了有效的试验数据。     

带攻角约束的高超声速飞行器自适应反步控制器设计

针对带攻角(AOA)约束的高超声速飞行器控制问题,提出一种基于非对称时变障碍函数的非线性自适应反步控制方法。首先,将飞行器模型化为严反馈形式,以反步法为基础进行控制器设计。然后通过光滑饱和函数对名义攻角指令信号进行限幅,并保证限幅信号的可导性,限幅产生的误差通过设计辅助系统进行补偿。进而使用障碍函数对攻角指令跟踪误差进行非对称时变约束。针对不确定性和干扰,设计新型自适应律对集中干扰上界进行估计并补偿。最终通过Lyapunov理论证明了闭环系统状态量一致最终有界并且攻角始终满足时变约束。仿真结果表明,本文方法能够在满足攻角约束基础上保证良好跟踪性能。     

倾转四旋翼飞行器垂直飞行状态气动特性

综合采用基于滑移网格技术的计算流体力学(CFD)方法与悬停状态气动干扰试验方法,对倾转四旋翼(QTR)飞行器垂直飞行状态的流场进行模拟与试验,研究飞行器垂直飞行状态气动特性以及部分参数对气动特性的影响.结果表明:倾转四旋翼飞行器在垂直飞行状态,前后旋翼之间干扰不明显,但旋翼与机翼的干扰明显;旋翼旋向对旋翼与机翼的干扰不...     

飞机座舱液晶显示系统设计

分析了飞机座舱综合液晶显示系统的特点,采用数字信号处理器ADSP21060搭配FPGA设计了座舱图形液晶显示系统,并已成功应用于实际系统,具有高效、通用、灵活的特点。     

基于粗糙集的战斗机型号工程综合评价决策模型

根据现代战斗机型号工程质量标准,考虑系统设计要求和用户需求,建立了新的战斗机型号工程评价指标体系。应用粗糙集理论对典型的第三代以上战斗机机型的各种指标数据进行挖掘,利用信息熵概念求得各指标的属性重要度,并将其权值化处理为各指标的权系数,克服了传统权系数确定方法的主观性。最后,建立战斗机型号工程综合评价决策模型并通过实例说明其可行性和有效性。     

民用飞机甚高频通信系统设计

民用飞机进行可靠的空地、空空通信,对飞行安全尤为重要。甚高频(very high frequency,简称VHF)通信系统是目前应用最为广泛的航空通信方式,VHF通信系统通过与机上音频系统交联实现飞机与外部的语音通信,通过与机上数据链系统交联实现飞机与地面的数据链通信。如何确保民用飞机VHF通信系统可靠、稳定地工作,一直是型号设计和适航部门关注的重点,也是型号设计的难点。首先从VHF通信系统的功能定义出发,提出了VHF通信系统的设计方案,进而提出了VHF通信系统的性能要求,最后重点阐述了VHF通信系统的机上设计要求以及系统功能验证过程,对型号设计和工程排故具有指导意义。