矩形截面高超声速进气道高焓风洞实验

对设计工作马赫数为4.5~6.5的矩形截面高超声速进气道进行了马赫数为6,5及4的高焓风洞实验研究,获得了进气道在不同反压下的性能参数及沿程静压分布.实验结果显示,设计状态下(Ma=6,α=0°),进气道的流量系数和总压恢复系数分别为0.97和0.41,增压比约为来流静压的35倍,隔离段出口马赫数不大于2.6;最大承受反压不小于来流静压的114.5倍.研究还发现,反压升高引起的激波串可停留在内压段,且不影响进气道的流量捕获;当Ma=5,α=0°时,进气道的流量系数不低于0.77,总压恢复系数在0.49~0.67之间.设计工作马赫数及攻角范围内,进气道内未发现明显的流动分离,均可正常起动工作.      

基于非开普勒轨道的高超声速临近空间飞行器自主天文导航研究

针对航天器自主导航方法不适合高超声速临近空间飞行器的问题, 研究了基于非开普勒轨道的高超声速临近空间飞行器自主天文导航方案. 论述了基于非开普勒轨道的自主天文导航机理, 通过对高超声速临近空间飞行器受力分析, 建立了动力学方程; 利用矢量倒数法则推导出空间运动方程; 设计了基于非开普勒轨道的状态模型和基于星光折射间接敏感地平的观测模型, 采用卡尔曼滤波进行了仿真验证. 仿真结果表明, 基于非开普勒轨道的高超声速临近空间飞行器自主天文导航可达到较高的位置和速度精度.      

天线窗缝隙流传热的实验研究

在马赫数为５．０和７．８，相应的单位长度雷诺数为４．７×１０７／米和３．５×１０７／米气流条件下，测量了天线窗与相邻防热层间缝隙的热流率分布，以研究局部外流场、缝隙尺寸及其取向对天线窗缝隙内热环境的影响。     

Micromanufacturing technologies of compact heat exchangers for hypersonic precooled airbreathing propulsion: A review

The Hypersonic Precooled Combined Cycle Engine (HPCCE), which introduces precooler into traditional hypersonic engine, is regarded as the most promising propulsion system for realizing a single-stage-to-orbit vehicle. The unique demands lead to the application of the compact heat exchangers, which can realize high thrust-to-weight ratio, sufficient specific impulse and high compression ratio. However, it is challenging to accurately manufacture the compact heat exchanger due to its extremely high heat dissipation capacity, remarkable compactness, superior adaptability and harsh operating condition. This review summarizes the precooling schemes of combined cycle propulsions and describes the demands and key issues in the fabrication of a compact heat exchanger for HPCCE. The investigation focuses on the application of various micromanufacturing methods of heat exchangers constructed from tubes of less than 1 mm in diameter and microchannels of less than 200 micrometers. Various micromanufacturing processes, which include microforming, micromachining, stereolithography, chemical etching, 3D printing, joining and other advanced microfabricating processes, were reviewed. In addition, the technologies are compared in terms of dimensional tolerance, material compatibility, and process applicability. Furthermore, the boundaries of the micromanufacturing constraints are specified as references for the design of compact heat exchangers. Ultimately, the technological difficulties and development trends are discussed for the fabrication of compact heat exchangers for HPCCE.     

吸气式高超声速飞行器助推-巡航轨迹优化

针对吸气式高超声速巡航飞行器建立了纵向平面内的二维轨迹优化模型(包括火箭助推段和吸气式飞行段),其中大气模型、气动力模型和发动机模型均建立了比较详细的模型,能够比较全面、准确地描述吸气式高超声速巡航飞行器的特征;基于配点法建立了适用于高超声速巡航飞行器助推-巡航轨迹优化的方法,在求解非线性规划时引入了规范化处理、稀疏分...     

Trajectory prediction in pipeline form for intercepting hypersonic gliding vehicles based on LSTM

The interception problem of Hypersonic Gliding Vehicles (HGVs) has been an important aspect of missile defense systems. In order to provide interceptors with accurate information of target trajectory, a model based on an improved Long Short-Time Memory (LSTM) network for trajectory prediction pipeline is proposed for the interception of a skip gliding hypersonic target. Firstly, for trajectory prediction required by intercepting guidance laws, the altitude, velocity and velocity direction of the target are formulated in the form of analytic functions, consisting of linear decay terms and amplitude decay sinusoidal terms. Then, the dynamic characteristics of the model parameters are analyzed, and the target trajectory prediction pipeline is proposed with the prediction error considered. Finally, an improved LSTM network is designed to estimate parameters in a dynamically-updated manner, and estimation results are used for the calculation of the final trajectory prediction pipeline. The proposed prediction algorithm provides information on the velocity vector for midcourse guidance with the effect of prediction errors on interception taken into account. Simulation is conducted and the results show the high accuracy of the algorithm in HGVs’ trajectory prediction which is conducive to increasing the interception success rate.     

An unsupervised classification method of flight states for hypersonic targets based on hyperspectral features

In response to the challenges of aerospace defense caused by the rapid development of hypersonic targets in recent years, the research on the unsupervised classification of flight states for hypersonic targets is carried out in this paper, which is based on the Hyperspectral Features (HFs) of hypersonic targets covered with plasma sheath during high-speed flight. First, a new concept of the super node is defined to improve classification accuracy by alleviating the intraclass variability of HFs. Then, the frequency domain information of the curve of HFs is utilized to reduce the feature redundancy according to the prior theoretical knowledge that the fluctuation characteristics of HFs of the same flight states are similar. Finally, an unsupervised classification method based on the Density Peak Clustering (DPC) for HFs is designed to class flight states after eliminating the impact of intraclass variability and feature dimension redundancy. The proposal is compared with the traditional classification algorithms on simulated hyperspectral data sets of typical flight states of the hypersonic vehicle and an actual-observation hyperspectral data set. The results indicate that the performance of our proposal has competitive advantages in terms of Overall Accuracy (OA), Average Accuracy (AA) and Kappa coefficient.     

落角与视场约束制导控制一体化策略

针对考虑视场(FOV)约束和落角约束的高超声速飞行器高精度打击问题，提出一种基于自适应动态规划(ADP)的新型制导控制一体化(IGC)策略。首先设计一种融合视场角与落角约束的视场角指令，在视场角精确跟踪的同时实现精确命中并满足两种约束，从而将约束问题转化为跟踪问题；然后，借助干扰观测技术估计制导控制一体化模型中不确定性并引入到性能指标设计中，又同时将视场角约束与落角约束考虑进去，设计基于自适应动态规划的制导控制一体化方法。利用ADP的强化学习思想求解出最优控制策略，既保证高超声速飞行器的精准打击，又满足视场角约束与落角约束，而且兼顾了对不确定性的鲁棒性。仿真结果验证了本文所提方法的有效性与优势。     

Accurately predicting hypersonic transitional flow on cone via a symmetry approach

A new algebraic transition model is proposed based on a Structural Ensemble Dynamics (SED) theory of wall turbulence, for accurately predicting the hypersonic flow heat transfer on cone. The model defines the eddy viscosity in terms of a two-dimensional multi-regime distribution of a Stress Length (SL) function, and hence is named as SED-SL. This paper presents clear evidence of precise predictions of transition onset location and peak heat flux of a wide range of hypersonic Transitional Boundary Layers (TrBL) around straight cone at zero incidence, to an unprecedented accuracy as validated by over 70 measurements for varying five crucial influential factors (Mach number, temperature ratio, cone half angle, nose Reynolds number and noise level). The results demonstrate the universality of the postulated multi-regime similarity structure, in characterizing not only the spatial non-uniform distribution of the eddy viscosity in hypersonic TrBL on cone, but also the dependence of the transition onset location on the five influential factors. The latter yields a novel correlation formula for transition center Reynolds number which takes similar functional form as the SL function within the symmetry approach. It is concluded that the SED-SL model simulates TrBL around cone with uniformly high accuracy, and then points out to an optimistic alternative way to construct hypersonic transition model.