Storage life of silicone rubber sealing ring used in solid rocket motor

It is urgent to carry out detailed research on storage performance of rubber sealing ring to get the criterion for its storage life. This paper acquires material ageing regularity by theoretical analysis and experimental confirmation. On this condition, failure mode and failure criterion of typical sealing structure is studied, and the failure mechanism is found. Thus by analyzing the stress distribution, the relationship between ageing state and sealing condition is established. Rationalization proposal is put forward and storage life of sealing ring is evaluated. The research mentionedabove has special reference to the design of sealing structures and can provide reference for prolonging their service life.     

无刷直流电机控制器硬件实时性设计方法

在航空领域,无刷直流电机由于其高效率及低故障率,已逐步取代传统液压作动部件.针对无刷直流电机控制器的硬件实时性设计,介绍了控制器的整体架构、各个模块功能及简单的控制流程和方法,重点讨论了控制器的双处理器交互的实时性设计,给出了优化方法,实验数据表明,优化方法达到了预期效果.     

Review on signal-by-wire and power-by-wire actuation for more electric aircraft

The huge and rapid progress in electric drives offers new opportunities to improve the performances of aircraft at all levels:fuel burn,environmental footprint,safety,integration and production,serviceability,and maintainability.Actuation for safety-critical applications like flight-controls,landing gears,and even engines is one of the major consumers of non-propulsive power.Conventional actuation with centralized hydraulic power generation and distribution and control of power by throttling has been well established for decades,but offers a limited potential of evolution.In this context,electric drives become more and more attractive to remove the natural drawbacks of conventional actuation and to offer new opportunities for improving performance.This paper takes the stock,at both the signal and power levels,of the evolution of actuation for safety-critical applications in aerospace.It focuses on the recent advances and the remaining chal lenges to be taken toward full electrical actuation for commercial and military aircraft,helicopters,and launchers.It logically starts by emphasizing the specificity of safety-critical actuation for aero space.The following section addresses in details the evolution of aerospace actuation from mechanically-signaled and hydraulically-supplied to all electric,with special emphasis on research and development programs and on solutions entered into service.Finally,the last section reviews the challenges to be taken to generalize the use of all-electric actuators for future aircraft programs.     

一种实现陀螺马达准确制动方案的研究

在分析了几种传统的电机制动方案基础上,提出了一种适合陀螺马达的能耗制动方案,该方案依据马达逐渐停转时自身产生的微弱电信号,再经放大处理后作为能耗制动的控制信号,实现陀螺马达准确、可靠、平稳的停止,避免了不及时切断电源而烧坏定子绕组的情况.     

巨型晶闸管在大型直流电动机拖动中的应用

巨型晶闸管在国内首次成功地用于大型风洞的动力系统──大型直流电动机拖动系统中，使大型直流拖动的控制系统简化，１０００—３０００ｋＷ系统简化到一个三相全控桥式整流电路，或两个三相全控桥式整流电路并联输出的技术问题上，而且由于系统简单化，潜在的故障因素减少，可靠性增强，维护的工作量也大大减少。本文介绍风洞动力控制系统的实用调速方法，以及用计算机控制速压的方法。     

用低纯原料制备电冰箱起动器PTCR的重要途经——热敏钛酸钡陶瓷第二相结晶

根据Al_2O_3-SiO_2系统相图,调整Al_2O_3,SiO_2添加剂比例,可在热敏钛酸钡陶瓷显微结构中形成莫来石结晶相,莫来石的形成改善了用国产低纯原料制备电冰箱起动器PTCR的性能。本文就莫来石第二相与PTCR性能关系进行了讨论。     

H2O2-PE固液火箭发动机低频不稳定燃烧研究

介绍了85％H2O2-PE固液火箭发动机的低频不稳定燃烧特征;应用发动机质量守恒方程对发动机低频耦合振荡燃烧现象进行了一维模拟,分析了氧化剂喷射压降对低频不稳定燃烧的影响。利用扰动分析确立了固液火箭发动机的稳定工作限。提出了抑制低频耦合振荡燃烧的方法。     

喷管扩散段型面对固体发动机性能的影响

通过计算喷管二维两相流和边界层比冲损失,研究了喷管扩散段型面对其性能的影响。研究结果表明：在喷管扩散段长度一定的情况下,膨胀比有一最佳值,超过该值,喷管性能反而下降;在膨胀比一定的情况下,在一定长度范围内喷管越长,其性能越高。从而得出,为使综合性能达到最佳,在一定膨胀比下喷管扩散段长度应取喷管出口直径的1～1．25倍。该结论可供设计人员参考。     

"爱国者PAC-3"型导弹主发动机装药药型反设计

对“爱国者PAC-3”型低空拦截导弹主发动机的装药药型进行了反设计,分析计算了开槽管形装药药型的优点。比较3种典型的开槽管形药型的压强-时间曲线,发现采用5槽大槽深非通透药型具有较好的综合性能,证明了“爱国者PAC-3”主发动机采用这一药型的原因所在。     

Modeling and analysis of mover gaps in tubular moving-magnet linear oscillating motors

A tubular moving-magnet linear oscillating motor (TMMLOM) has merits of high efficiency and excellent dynamic capability. To enhance the thrust performance, quasi-Halbach permanent magnet (PM) arrays are arranged on its mover in the application of a linear electro-hydrostatic actuator in more electric aircraft. The arrays are assembled by several individual segments, which lead to gaps between them inevitably. To investigate the effects of the gaps on the radial magnetic flux density and the machine thrust in this paper, an analytical model is built considering both axial and radial gaps. The model is validated by finite element simulations and experimental results. Distributions of the magnetic flux are described in condition of different sizes of radial and axial gaps. Besides, the output force is also discussed in normal and end windings. Finally, the model has demonstrated that both kinds of gaps have a negative effect on the thrust, and the linear motor is more sensitive to radial ones.