控制力矩陀螺磁悬浮转子的指数趋近积分滑模控制研究

针对微重力、动框架等多源扰动下磁悬浮控制力矩陀螺磁轴承转子系统的强非线性、参数摄动及未建模动态等问题,开展控制力矩陀螺的磁轴承转子鲁棒控制研究。建立了磁轴承转子轴向通道动力学模型与电磁力工作点线性化模型,分析了系统参数摄动及未建模动态,并在此基础上提出了一种非线性系统指数趋近积分滑模控制方法,设计了含有电流及位移的积分滑模平面,采用指数趋近律与饱和函数抑制抖振实现到达阶段滑模控制律。实验结果表明：采用该方法可有效抑制滑模的抖振现象,参数摄动时系统具有较佳动态性能,同时在转子转动、框架工作时保证系统良好鲁棒性。     

自落式缓冲气囊仿真研究

缓冲气囊被广泛应用于武器装备及物资空投、航天器着陆回收、汽车安全气囊等领域。设计具有优良缓冲性能的气囊系统可以减小物品或乘员所受的冲击力,最大程度上避免了物资的损坏和乘员伤亡。文章以某型空投缓冲系统所用气囊作为研究对象,运用LS-DYNA有限元仿真软件,采用控制体积法对该气囊缓冲过程进行了数值模拟计算,同时,结合工程计算与试验测试,合理确定气囊设计中关键技术状态,获得了带有辅囊的自落式缓冲气囊设计思路与方法,提高了研制品质,节省了研制成本与周期。     

四轴飞行器姿态监控系统设计

设计了一套四轴飞行器上位机监控系统。针对准确掌握四轴飞行器的实时姿态、位置等信息和对四轴飞行器进行精准控制两大核心问题,开发了由上位机实现四轴飞行器姿态数据采集、通信及控制等功能的监控系统。监控系统良好的功能设计和友好的人机界面使得用户能够准确掌握飞行器的飞行信息,从而能够更精准地控制四轴飞行器飞行姿态。实验验证,监控系统简单实用,性能稳定,精度高,使整个飞行系统抗干扰能力强,鲁棒性、稳定性好。     

DDN状态监控系统的设计实现

设计实现了一个用于解决DDN（Digital Data Net）网络管理不足之处的新系统——DDN状态监控系统．详细论述了该系统的设寸思路和软件结构,采用了数据库、网络轮询等一系列有效的技术手段来解决DDN网络管理的不足,指出了该系统的技术创新点。     

使用混合执行机构的快速机动卫星力矩分配算法

针对单框架控制力矩陀螺群（SGCMGs）存在奇异和单框架控制力矩陀螺（SGCMG）存在框架转速死区的问题,研究了SGCMG与飞轮联合作为执行机构的控制力矩分配算法,以SGCMG功耗、飞轮功耗和飞轮角动量的二次型加权矩阵求和为性能指标,提出了一种形式简洁的混合执行机构力矩分配算法,通过分析,证明该分配算法能够有效的避免SGCMGs的奇异;设计了一种SGCMG功耗加权矩阵的调节策略,解决了SGCMG陷入转速死区的问题,设计了一种飞轮角动量加权矩阵的调节策略,通过对加权矩阵的实时调节实现了对飞轮角动量的管理,解决了飞轮转速的饱和与过零问题。数学仿真结果验证了该力矩分配算法的有效性。     

空间机器人在轨更换ORU的力/位混合控制方法

针对ORU在轨更换任务,首先推导了空间机械臂末端自由、末端与环境接触等情况下的动力学方程,并提出了相应的接触力计算方法;其次,改进了传统的R\|C控制方法,采用加权选择矩阵代替原有的选择矩阵,实现了力控制与位置控制之间的平滑切换;最后,开发了基于Matlab/Simulink的闭环控制仿真系统,该系统由多体动力学、接触动力学、轨迹规划、力/位混合控制、3D显示等模块组成。利用该系统开展了ORU转移与安装过程的闭环控制仿真,仿真结果校验了所提方法的有效性。     

Aerodynamic design of tractor propeller for high-performance distributed electric propulsion aircraft

Aiming to maximize the aerodynamic performance of the Distributed Electric Propulsion (DEP) aircraft, a hybrid design framework which focuses on the aerodynamic performance of the propeller/wing integration has been developed and validated numerically. Variable-fidelity modelling for propeller aerodynamics has been used to achieve computational efficiency with reasonable accuracy. By optimizing the aerodynamic loading distributions on the tractor propeller disk, the induced slipstream is redistributed into a form that is beneficial for the wing downstream, based on which the propeller blade geometry is generated through a rapid inversed design procedure. As compared with the Minimum Induced Loss (MIL) propeller at a specified thrust level, significant improvements of both the lift-to-drag ratio of the wing and the propeller/wing integrated aerodynamic efficiency is achieved, which shows great promise to deliver aerodynamic benefits for the wing within the propeller slipstream without any additional devices.     

Global Hybrid Simulation of Magnetic Reconnection in the Magnetosheath

A three-dimensional (3-D) global hybrid simulation is carried out for the generation and structure of magnetic reconnection in the magnetosheath due to interaction of an interplanetary Tangential Discontinuity (TD) with the bow shock and magnetosphere. Runs are performed for solar wind TDs possessing different initial half-widths. As the TD propagates through the bow shock toward the magnetopause, it is greatly narrowed by a two-step compression processes, a "shock compression' followed by a subsequent ``convective compression'. In cases with a relatively thin solar wind TD, 3-D patchy reconnection is initiated in the transmitted TD, forming magnetosheath flux ropes. Multiple components of ion particles are present in the velocity distribution in the magnetosheath merging, accompanied by ion heating. For cases with a relatively wide initial TD, a dominant single X-line appears in the subsolar magnetosheath after the transmitted TD is narrowed. A shock analysis is performed for the detailed structure of magnetic reconnection in the magnetosheath. Rotational Discontinuity (RD)/Time-Dependent Intermediate Shock (TDIS) are found to dominate the reconnection layer, which and some weak slow shocks are responsible for the ion heating and acceleration.      

无人机用燃料电池阴极供气系统建模与控制

燃料电池因其高效、无污染、噪声小等特点,被认为是未来最具有潜力的无人机（UAV）用动力源,燃料电池阴极供气系统的控制技术是决定燃料电池系统性能和可靠性的关键。针对无人机用质子交换膜燃料电池（PEMFC）阴极供气系统,首先,考虑外界温度、压力、空气密度以及雷诺数等随高度变化的参数,建立了跨高度离心空压机模型并分析了其在不同高度下的工作特性,基于无刷直流电机反电势特征构建了高速空压机驱动电机模型。其次,通过计算燃料电池阴极氧气和氮气的动态分压获取了PEMFC电堆输出电压。设计了基于分数阶PI^λD^μ的过氧比和阴极气压控制方法,驱动电机采用有限集模型预测控制（MPC）实现快速的转矩响应,仿真结果表明设计的控制器可在无人机跨高度运行条件下实现过氧比的快速调节,同时维持阴极气压稳定,满足燃料电池阴极供气需求。