液体压力激波加工技术研究

机械产品的零部件，通常需要通过成形与改性才具有所需形状及实用功能，本文提出了一种新型材料成形与改性加工的方法——液体压力激波加工。采用脉冲超声波聚焦技术，通过压电陶瓷激波发生器在液体介质中产生高能瞬时压力激波，对材料进行冲击，产生变形或表面改性。经过理论研究和试验验证，初步掌握了液体压力激波的产生、激波能量的控制和激波加工的动力学机制。这种加工方法具有能量可控性好、成本低廉和安全高效等优点，非常适合具有复杂结构和型面的中小零件加工，是一种颇具竞争力的先进制造技术手段。     

燃气收缩式作动器--一种新颖高效的着陆缓冲装置

文章介绍一种新颖的着陆缓冲装置——燃气收缩式作动器。可是在回收物体乘降落伞着陆前,通过回收物体快速向上（向降落伞方向）提升,抵消物伞系统的垂直下降速度,从而达到回收物体以很小的速度着陆,实现回收物体的软着陆。     

战术导弹垂直发射系统的现状及发展趋势

介绍了垂直发射装置通用化、箱式化和模块化的总体特征。详细论述了国外现役8种类型的垂直发射系统，根据基本结构特点将垂直发射装置分为模块式结构、独立布置的分离式结构和旋转式结构，另依据发射动力将垂直发射装置分为热发射和冷发射。以热发射的同心筒式结构和冷发射采用的大倾角、模块化设计为例．分析了垂直发射装置的发展趋势。     

板料成形的数值分析及程序系统

本文讨论了板料成形的数值分析方法,并介绍一个能在微机上运行的程序系统——CASF(Computer Aided Sheetmetal Forming)01系统。 CASF01系统采用参数三次样条描述板金零件的几何外形,按弹-塑性流动理论用完全拉格朗日有限元法计算成形过程中的应力应变分布。由于参数样条的插值性和分段描述特点与有限元法的结构离散在基本思想和处理方法上的相似性,系统内曲面描述和力学分析程序间数据传递迅速方便。圆板胀形及其汽车零件的计算实例表明了CASF01系统的可靠性和实用性。     

Instability and unsteadiness of aircraft wake vortices

This paper presents a review of theoretical and experimental results on stability and other unsteady properties of aircraft wakes. The basic mechanisms responsible for the propagation and the amplification of perturbation along vortices, namely the Kelvin waves and the cooperative instabilities, are first detailed. These two generic unsteady mechanisms are described by considering asymptotic linear stability analysis of model flows such as vortex filaments or Lamb–Oseen vortices. Extension of the linear analysis to more representative flows, using a biglobal stability approach, is also described. Experimental results obtained using LDV, hot wire and PIV in wind tunnels are presented and they are commented upon the light of theory.     

新型超高强度钢G50热变形与组织性能的关系

研究了新型无钴超高强度钢G50经不同锻造比墩粗锻造后材料的组织及性能的变化情况，并检验该新材料随锻造及热变形的能力。结果表明，该新材料具有非常好的可锻性及热成形性，且不同锻造比锻造并按标准制度热处理后的性能相差不大。     

Plastic wrinkling prediction in thin-walled part forming process:A review

The precision forming of thin-walled components has been urgently needed in aviation and aerospace field. However, the wrinkling induced by the compressive instability is one of the major defects in thin-walled part forming. The initiation and growth of the wrinkles are interac-tively affected by many factors such as stress states, mechanical properties of the material, geometry of the workpiece and boundary conditions. Especially when the forming process involves compli-cated boundary conditions such as multi-dies constrains, the perturbation of clearances between workpiece and dies and the contact conditions changing in time and space, etc., the predication of the wrinkling is further complicated. In this paper, the current prediction methods were summa-rized including the static equilibrium method, the energy method, the initial imperfection method, the eigenvalue buckling analysis method, the static-implicit finite element method and the dynamic-explicit finite element method. Then, a systematical comparison and summary of these methods in terms of their advantages and limitations are presented. By using a combination of explicit FE method, initial imperfection and energy conservation, a hybrid method is recommended to predict plastic wrinkling in thin-walled part forming. Finally, considering the urgent requirements of com-plex thin-walled structures’ part in aviation and aerospace field, the trends and challenges in wrin-kling prediction under complicated boundary conditions are presented.     

钣金成形信息化发展关键技术

钣金成形广泛应用在航空、汽车、船舶等各个行业,而钣金成形信息化在钣金成形技术中起重要作用.钣金成形信息的存储方式、关联技术、信息规范技术、数据库技术、钣金成形信息共享平台技术、钣金成形信息的获取和利用技术,是钣金成形信息化的关键技术.通过这些关键技术规范钣金成形信息的表达、存储方式,建立完善的钣金成形信息平台,利用数据挖掘技术,为钣金成形技术人员提供钣金成形工艺方案、工艺规程、模具设计需要的充足的信息.钣金成形信息化技术的发展将理顺钣金成形信息的积累和利用,消除信息孤岛,提高钣金成形的整体工艺水平和工艺准备效率.     

新型Al-Li-Cu-Mg合金蒙皮拉伸成形特性试验研究

随着新型Al-Li-Cu-Mg合金蒙皮在航空航天等高技术工业的应用日益广泛,新型Al-Li-Cu-Mg合金蒙皮拉伸成形特性已成为新型Al-Li-Cu-Mg合金板蒙皮成形质量精确控制以及蒙皮设计迫切需要解决的关键问题.因此,首先获得了新型T8态Al-Li-Cu-Mg合金的最佳热处理工艺参数;其次,采用试验方法,研究了不同热处理状态的拉伸成形过程,揭示了新型Al-Li-Cu-Mg合金板材的拉伸成形特性.发现通过固溶处理,后续时效能够显著提高新型T8态Al-Li-Cu-Mg合金材的拉形能力;在新型A1-Li-Cu-Mg合金板材拉形过程,桔皮现象主要出现在补拉阶段,蒙皮悬空区应变值＞0.0215时,板材表面将出现桔皮,且与材料热处理状态无关.     

热压罐和RTM成型的C型框弯曲试验研究

通过热压罐和RTM成型工艺的复合材料C型框弯曲试验,研究了两种工艺方法对其承载能力及破坏模式的影响.试验结果表明:热压罐成型的隔框承载能力比RTM成型工艺高27.5％,且其分散性小;两种工艺的破坏位置一致,但RTM成型的隔框在平直段与弯曲段过渡截面处外壁先发生分层,而热压罐成型在该处外壁至破坏前才出现分层损伤.该结论可以为该型结构的工程应用提供有价值的参考.