某扭力管万向节组件及支撑轴承的正弦振动疲劳研究

本文建立C919某扭力管万向节组件及支撑轴承的有限元模型，对其进行模态分析及正弦分析，推导了正弦振动下的疲劳寿命计算公式并预估了模型的寿命，通过模态试验验证了模型的正确性，通过正弦试验验证了疲劳寿命计算的正确性。该疲劳寿命计算方法可用来预估相关模型的正弦振动疲劳寿命。     

Analysis of oil shedding and ligaments formation on bearing rotary elements

For designing efficient lubrication system of an aeroengine bearing chamber, sufficient knowledge on oil/air two-phase flow characteristics is required. When analyzing bearing chamber two-phase flow, the essential prerequisite is quantifying the oil ligaments, which are detached from bearing rotary elements and shed into the bearing chamber. Related investigations are mainly targeted at liquid shedding on the rotating disk as opposed to the bearing rotary elements. Moreover, the research based on bearing rotary elements is conducted by experiment. Due to the limited operating conditions, experimental studies cannot guide engineering applications. To overcome these limitations, a theoretical model is established in this paper, for revealing the mechanism of oil shedding from bearing rotary elements and quantifying the shedding ligaments. The theoretical model is validated against experimental results from classical studies. In addition, the correlation for shedding ligaments number based on aeroengine bearing structural and operational parameters is obtained via theoretical analysis. The analytical results demonstrate that oil shedding and ligaments formation appear at the edge of bearing inner race outer-periphery. The number of shedding ligaments increases with the rise of shaft rotational speed while decreases with the growth of oil viscosity.     

Synchronous chirp mode extraction: A promising tool for fault diagnosis of rolling element bearings under varying speed conditions

As critical components in modern aerospace productions, rolling element bearings(REBs) generally work under varying speed conditions, which brings great challenges to their operating health monitoring. Some novel time–frequency decomposition(TFD) algorithms are established recently to extract nonlinear features from the non-stationary signals effectively, which are promising for realizing fault diagnosis of REBs under varying speed conditions. However, numerous personal experiences must be incor...     

Pneumatic pressure control based on improved NMPC and its application to aeroengine surge simulation

In the semi-physical simulation of aeroengines, using the pneumatic pressure servo control technology to provide realistic pneumatic excitation to the sensors and electronic controller can improve the confidence of the simulation and reduce the test cost and risk. However, the existing methods could not satisfy the precise simulation of large-amplitude and high-frequency pulsating pressure during aeroengine surge. In this paper, a pneumatic pressure control system with asymmetric groups of the High-Speed on–off Valve (HSV) is designed, and an Improved Nonlinear Model Predictive Control (INMPC) method is proposed. First, the volumetric flow characteristics of HSV are tested and analyzed with Pulse Width Modulation (PWM) signal input. Then, a simplified HSV model with the volume flow characteristic correction is developed. Based on these, an integrated model for the whole system is further established and used as the prediction model in INMPC. To improve the computational speed of the rolling optimization process, the mapping scheme from control signal to PWM duty cycle of HSVs and the objective function with exterior penalty function are designed. Finally, the random step, sinusoidal and real engine surge data are set as the reference pressure in multiple comparative experiments to verify the effectiveness of the pressure tracking system.     

Pressure performance for a thin-walled ring and turbulent-jet orifice modeled elastic squeeze film damper

This paper explores an analytical model for Elastic Ring Squeeze Film Damper (ERSFD) with thin-walled ring and turbulent-jet orifices, and uncovers its Oil Film Pressure Performance (OFPP). Firstly, the ring deformation is addressed by using the Fourier series expansion approach and the orifice outflow rate is characterized with the Prandtl boundary layer theory. Secondly, applying finite difference scheme, the influence of elastic ring flexibility, orifice diameter, and attitude angle on the OFPP is analyzed. Finally, Outer chamber pressure was measured experimentally at different rotor speeds. The results indicate that the outer chamber pressure coats an individual load-carrying region and spreads symmetrically pertaining to the attitude angle. Its amplitude drops as the elastic ring flexibility decreases but boosts with the reduction of the orifice diameter. For inner chamber pressure, the orifice diameter effects a similar trend to the outer cavity, but exhibits more stable distribution regarding the attitude angle. Minimizing the elastic ring flexibility causes an increase in amplitude. The model is validated by the test results giving that the outer chamber pressure shifts synchronously and periodically with the variation of the attitude angle, while the pressure amplitude increases slightly at higher rotor speeds.     

基于ICA包络增强MEMD的滚动轴承故障诊断

针对多元经验模态分解(MEMD)存在模态混叠、带内噪声干扰导致轴承故障特征信息微弱难提取问题,提出了基于独立分量分析(ICA)包络增强MEMD的滚动轴承故障诊断.采用MEMD对多通道信号进行自适应分解,依据峭度和相关系数选取包含故障信息的本征模态函数(1MF);对所选取IMF分量的包络信号进行ICA分析,抑制模态混叠和...