高温低周疲劳-蠕变的改进型广义应变能损伤函数方法

通过对广义应变能损伤函数(GSEDF)法进行分析,用非弹性应变能表征低周疲劳(LCF)损伤,提出了一种高温低周疲劳-蠕变(LCF-C)寿命预测的改进型GSEDF模型,修正了GSEDF法中的能量参数,使其与工程实际更吻合.所提出的模型具有模型参数少、适用性广和试验数据利用率高等优点,且能综合反映加载方式、保载时间和平均应...     

考虑压缩性的Langtry转捩模型对双楔平板附面层复杂流动数值模拟研究(英文)

使用一种修正基于当地变量加入压缩性修正进行转捩判断的转捩模型对高超声速下的双楔平板外形的激波/附面层干扰现象进行了研究,并通过数值计算考量了激波边界层中流场特性受高温壁和前缘钝度的影响。通过与实验数据的比较发现,在第1个斜坡存在层流边界层和层流分离现象,前缘钝度和壁面温度对Kink处的分离特性有着重要的影响,并通过和实验静压分布与纹影法得到的激波附面层比较,使用转捩模型得到了不错的结果。     

脉冲爆震火箭发动机高频实验研究

为了研究脉冲爆震发动机的高频工作特性,以航空煤油和压缩氧气为推进剂,采用爆震增强装置,增大推进剂供给压力以及增大电磁阀控制气压力等措施,在脉冲爆震火箭发动机模型上进行了实验,成功获得45Hz时的爆震压力波形。实验结果表明,频率增高,爆震波峰值压力下降,有利于加速缓燃向爆震的转变(Defla-gration to Detonation Transition,DDT)。当爆震充分发展时,爆震波波速基本不变,峰值压力上升时间趋于定值。工作频率为45 Hz时,爆震波峰值的压力为3.2 MPa,爆震波的波速为1 715.5m/s。     

空间目标红外辐射特性分析

研究空间目标的红外辐射特性,对于探测识别空间目标、监视空间碎片、保障卫星运行安全等问题有重要意义.本文以空间卫星为目标,分析了其红外辐射特性形成的原理,依据空间目标的热平衡方程,应用节点网络法求解目标表面的温度分布,并结合普朗克定律推导空间目标红外辐射度的计算方法,在分析总结相关资料的基础上得到了求解空间目标红外辐射特...     

Ionospheric heating due to solar flares as measured by SROSS-C2 satellite

The data on thermal fluctuations of the topside ionosphere have been measured by Retarding Potential Analyser (RPA) payload aboard the SROSS-C2 satellite over the Indian region for half of the solar cycle (1995–2000). The data on solar flare has been obtained from National Geophysical Data Center (NGDC) Boulder, Colorado (USA) and other solar indices (solar radio flux and sunspot number) were download from NGDC website. The ionospheric electron and ion temperatures show a consistent enhancement during the solar flares. The enhancement in the electron temperature is 28–92% and for ion temperature it is 18–39% compared to the normal day’s average temperature. The enhancement of ionospheric temperatures due to solar flares is correlated with the variation of sunspot and solar radio flux (F10.7cm). All the events studied in the present paper fall in the category of subflare with almost same intensity. The ionospheric electron and ion temperatures enhancement have been compared with the IRI model values.     

Synthesis of Iron-containing Carbon Microparticles from Deoiled Asphalt and Ferrocene

The deoiled asphalt as the carbon source and the ferrocene as the metal source and the catalyst precursor were chosen to synthe-size iron-containing carbon microparticles through co-carbonization at the temperature of about 450 ℃ for 3 h. The resulting products were treated at 2 000 ℃ for 2 h. All samples were examined by high resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD). The results show that the iron particles in the heat-treated material are completely coated by carbon. In addition to the fully filled carbon microparticles as well as hollow carbon ones, also form carbon fibers with hollow centers. The formation mechanism of the as-prepared products was discussed briefly.     

先进风洞气源系统的研制与运行

系统包括空气压缩、空气处理、储气、冷却水供应和中央监控等五个分系统,空压机的吸入流量为248m3 min,排气压力为2.4MPa,成品气常压露点达-38℃,可以满足一座0.6m量级的高速风洞对气源的需要。该系统在与800m3储气容积配套时,能保证在气体流量达140kg s、持续时间达40s的风洞试验中,其总温变化不超过1.5K。     

总温传感器动态特性的方向敏感性研究

讨论了气流方向对一种机载总温传感器动态特性的影响，发现气流偏角对传感器的动态特性有很大的影响，首次提出了总温传感器动态特性的方向敏感性概念。本文分析了其原因，并指出在设计、生产和使用过程中控制气流偏角的大小，否则将破坏传感器的动态性能。这一结论也适用于与结构类型相似的其它总温传感器。     

烧蚀材料的多光谱真温测量法

应用棱镜分光式多波长光电高温计对氧乙炔焰烧蚀材料的真实温度进行了测量。精心地选择波段及处理方法使烧蚀材料剥离、水蒸汽及烟雾影响减至最小，采用一点标定技术解决了高温区标定问题。     

对高温低周疲劳寿命预测模型的评价

高温低周劳寿命预测方法对于承受变幅载荷的高温构件的设计具有重要意义。本文系统介绍了迄今这方面所取得的研究成果，特别对目前在国内外影响较大的ＳＲＰ等几个ＨＬＦ寿命预测的经典参数模型和近些年发展起来的预测ＨＬＦ寿命的损伤力学方法作了较为详细的评价，并指出存在问题和研究方向。