大功率柴油机排气阀机器人焊接系统及工艺

为了提高船舶焊接质量,采用机器人柔性化焊接系统堆焊镍合金阀盘。设计了高效、高质量的机器人焊接系统,对SNCrW不锈钢进行了焊接工艺研究,并对样件进行了检验分析。经检验,不存在超过0.06mm的缺陷,完全符合阀盘质量检测标准,属于合格产品,完成了国内首个高质量镍基堆焊阀盘的焊接。     

Dependence of creep age formability on initial temper of an Al-Zn-Mg-Cu alloy

The initial temper of the material may directly affect the whole creep age forming(CAF)process. In terms of creep deformation and stress relaxation, using the constant-stress creep aging and constant-strain stress relaxation aging tests, the relationship between initial temper and CAF formability is investigated for an Al-Zn-Mg-Cu alloy at 165 °C for 18 h. Three tempers are selected as the initial tempers in CAF, viz., solution, retrogression and re-solution. The CAF formability of this alloy with initial temper of retrogression is the best, and the creep strain of the retrogression tempered specimen after creep aging of 18 h is about 1.21 and 1.34 times than that of the solution and the re-solution tempered specimens, respectively. The calculated stress exponents of this alloy with three initial tempers range from 7.3 to 9.5, indicating that the CAF of this alloy is mainly controlled by the dislocation creep. The various formability for three initial tempers are attributed to different inhibitions of the transgranular precipitates on the dislocation movement. For the retrogression temper, the initial fine and uniformly distributed precipitates are seriously coarsened after6 h of CAF, which minimally inhibit the dislocation movement. While, for the re-solution temper,the fine precipitates are re-precipitated in the matrix of the alloy, which observably hinder the dislocation movement and lead to the worst formability.     

时序信号设计的一种新方法

文章结合高速时序工作的特点，从实现的角度提出了一种利用软件调整时序的新方法。在可编程逻辑器件中，利用数字时钟管理器（DCM），通过模块化和增量式设计思想达到对高速时序信号的精确调节。最终实现了一个20MHz速率的时序控制，调节精度达到100ps。     

Fronts and thermohaline structure of the Brazil–Malvinas Confluence System

Fronts and thermohaline structure of the Brazil–Malvinas Confluence System (BMCS) are studied from climatic data, “Marathon Exp. Leg.8, 1984” data, and Sea surface temperature (SST) data base “ds277-Reynolds” (1981–2000). The South Atlantic Central Water (SACW) is divided in two main types: tropical (TW) and subtropical water (ST). Water masses, Fronts, Inter-Frontal and Frontal Zones are analysed and classified: (a) the water masses: Tropical Low-Salinity Water, Tropical Surface Water, Tropical Tropospheric Water, Subtropical Low-Salinity Water, Subtropical Surface Water, Subtropical Tropospheric Water. T,S characteristics of intermediate, deep and bottom water defined by different authors are confirmed and completed; (b) the Inter-Frontal Zones: Tropical/Brazil Current Zone, Subtropical Zone and Subantarctic Zone; (c) the Frontal Zones: Subtropical, Subantarctic and Polar, and (d) the Fronts: Subtropical Front of the Brazil Current, Principal Subtropical Front, North Subtropical Front, Subtropical Surface Front, South Subtropical Front, Subantarctic Surface Front, Subantarctic Front and Polar Front. Several stable T–S relationships are found below the friction layer and at the Fronts. The maximum gradient of the oceanographic characteristics occurs at the Brazil Current Front, which can be any of the subtropical Fronts, depending on season. Minimum mean depth of the pycnocline coincides with the Fronts of the BMCS, indicating the paths of low-salinity shelf waters into the open ocean. In the work it is shown how to recover the horizontal and vertical thermohaline structure of waters from satellite data RSMAS SST.     

Is there an instrumental drift in the counting rate of some high latitude neutron monitors?

For the last six decades the neutron monitors have provided a continuous string of very reliable data to the heliophysics community. Although neutron monitors are not the primary source of data for the galactic cosmic rays, these data serve as a baseline reference for the data collected by the detectors on board the satellites and deep space probes, far away from earth orbit. The pressure corrected hourly data are available from the World Data Centers. These data have been used to derive deep insights pertaining to the electromagnetic states of the heliosphere and the modes of transport of energetic charged particles in the tangled interplanetary magnetic fields. We present evidence that some of the high latitude neutron monitors are undergoing long-term drifts in their baselines. In particular, we argue that there is no physical basis to justify the observed long-term downward trend in the baseline of the South Pole neutron monitor. The real reason may have to do with its maintenance at a distant location with challenging logistics and an improper normalization of its data after the 26 months break in the 1970s.     

钛硅共晶合金中硅化物及其对显微硬度的影响

观察了钛硅共晶系合金的微观组织。综合分析了X射线能谱（X－EDS）、透射电子显微镜（TEM）以及X射线衍射（XRD）结果，确认了铸态组织中析出的硅化物本质，并测得该硅化物的显微维氏硬度。结果表明，钛硅共晶合金铸态组织由α-Ti和Ti5Si3两相组成。亚共晶钛硅合金中共晶区比枝晶区具有更高的显微硬度，而共晶和过共晶合金的共晶区显微硬度明显高于亚共晶合金。     

镁合金焊接的研究与发展

综述了三种典型的镁合金焊接技术的研究现状，分别为钨极氩弧焊、激光焊和搅拌摩擦焊，分析了镁合金焊接的研究和应用现状，讨论了这些焊接方法的优缺点，并指出镁合金焊接研究中存在的问题和今后的发展方向。     

温度畸变发生器研制

介绍了航空发动机温度畸变试验装置的工作原理、设计技术要求、主要设备以及用涡喷和涡扇发动机调试和对比试验的结果。调试结果证明：该装置具有高的工作可靠性、可控性和稳定性,高温区平均温升值可达10－400K,绝对温升率可达300－5500K/s,可用于空气流量为30－150kg/s各类燃气涡轮发动机的温度畸变试验。     

AZ91镁合金负压消失模铸造充型速度的研究

真空度、浇注温度及模样厚度对AZ91镁合金消失模铸造充型速度影响的全因子实验的结果表明 ,它们都对充型速度起积极的作用 ,真空度是决定充型速度的一个关键工艺参数。在不抽真空时 ,充型速度非常小且随充型过程的进行逐渐降低 ,浇注温度对充型速度的影响也很小 ;抽真空时 ,充型速度在充型过程中不断变化且呈现不出任何规律 ,其起伏的幅度随真空度、浇注温度和模样厚度的增大而增大 ;在真空度较低时 ,随着真空度和 或浇注温度的提高 ,平均充型速度迅速增大 ,真空度与浇注温度对充型速度的交互作用增强 ;在较高的真空度下 ,平均充型速度仍随浇注温度的提高而增大 ,但平均充型速度的增大速率却随真空度的进一步提高而降低 ,真空度与浇注温度对充型速度的交互作用很弱。模样厚度对平均充型速度影响在抽真空时有所提高。     

电镀Ni-Sn合金热处理前后的组织和性能

分析了电镀Ni-Sn合金各种镀层的镀态组织和加热时组织的转变机理,并对镀层的耐磨性、耐蚀性进行了对比实验.结果表明,镀态组织主要由亚稳相αNi(M)和NiSn(M)组成,高Sn时出现平衡相Ni3Sn4和βSn;加热时随着温度升高,亚稳相逐渐向平衡相转变,在一定的温度下由于平衡相弥散析出,使镀层硬度升高;单相NiSn(M)组织耐强氧化性介质能力比不锈钢稍差,当加热到400℃时耐磨性优于中碳钢淬火.