600Mb/s高速数传接收机的设计与实现

提出一种基于FPGA的600Mb/s高速数传接收机全数字实现方案,对采用Costas环的载波恢复算法和采用并行数据转换跟踪环的码同步算法作了介绍。测试结果表明,该接收机在码速率小于350Mb/s时,解调损失小于1.5dB;在码速率为600Mb/s时,解调损失小于3dB。     

固体发动机壳体用D406A钢锻件的断裂韧度KIC测试研究

对固体发动机壳体用D406A超高强度锅锻件,进行了平面应变断裂韧度K_(IC)测试研究,获得了壳体重要部位实用锻件的K_(IC)值;找到了材料强度和断裂韧度合理匹配的碳含量范围,为壳体设计与安全使用及断裂分析提供了试验依据。     

差分技术在双星快速定位通信系统中的应用

卫星定位通信系统是具有10米以内高精度的第二代卫星导航定位系统。达到高精度的关键是应用了伪随机码扩谱及差分定位技术。诸如星历误差、电离层时延变化和地球模型不准等误差,通过应用差分技术可以大部分消除。本文阐述了差分技术的应用和系统精度分析。     

日地共转扰动似稳结构及其反相和漂移规律的最新证据

日地共转扰动似稳结构及其反相现象在第２１及２２周再次显现，从而证实了上述发现是一种在长达世记的时间尺度内存在的普遍规律。包括１９９１－１９９２年内的百年地磁扰动资料还说明偶数太阳周的共转似稳结构扰动峰有逆太阳自转而线性性漂移的趋向。对即将来临的极小年前可能出现的共转扰动作了试验性的预测。     

高能推进剂主要组分对燃烧效率影响研究

利用燃烧残渣中活性铝含量分析、真空爆热特性和发动机试验手段，研究了高能推进剂中主要组分对推进剂燃烧效率的影响。实验结果表明，增塑剂的种类和含量是影响燃烧效率的主要因素，ＡＰ含量及固体组分的粒度级配也有明显的影响。ＢＳＦХ７５发动机试车结果表明，铝粉粒度级配的改变，可以使高能推进剂比冲效率由０．８８提高到０．９２。     

简化七阶CQKF及其在SINS大失准角初始对准中的应用

针对捷联惯性导航系统（SINS）大失准角初始对准的滤波过程，提出简化七阶正交容积卡尔曼滤波算法（7th-SCQKF）。根据简化容积卡尔曼滤波(CKF)理论，推导出改进的简化七阶CKF算法（7th-MSSRCKF），改进了原简化七阶CKF（7th-SSRCKF）的性能；同时，在7th-SSRCKF和7th-MSSRCKF基础上，引入正交半径准则，提出简化七阶CQKF（7th-SCQKF）算法，提高了滤波精度；并将简化七阶CQKF（7th-SCQKF）算法应用到SINS的大失准角初始对准仿真中，结果表明，7th-SCQKF比7th-MSSRCKF的滤波精度高，验证了新算法的正确性和有效性。     

Mitigation of receiver biases in ionospheric observables from PPP with ambiguity resolution

PPP (Precise Point Positioning) is a GNSS (Global Navigation Satellite Systems) positioning method that requires SSR (State Space Representation) corrections in order to provide solutions with an accuracy of centimetric level. The so-called RT-PPP (Real-time PPP) is possible thanks to real-time precise SSR products, for orbits and clocks, provided by IGS (International GNSS Service) and its associate analysis centers such as CNES (Centre National d'Etudes Spatiales). CNES SSR products also enable RT-PPP with integer ambiguity resolution. In GNSS related literature, PPP with ambiguity resolution (PPP-AR) in real-time is often referred as PPP-RTK (PPP – Real Time Kinematic). PPP-WIZARD (PPP - With Integer and Zero-difference Ambiguity Resolution Demonstrator) is a software that is made available by CNES. This software is capable of performing PPP-RTK. It estimates slant ionospheric delays and other GNSS positioning parameters. Since ionospheric effects are spatially correlated by GNSS data from active networks, it is possible to model and provide ionospheric delays for any position in the network coverage area. The prior knowledge ionospheric delays can reduce positioning convergence for PPP-RTK users. Real-time ionospheric models could benefit from highly precise ionospheric delays estimated in PPP-AR. In this study, we demonstrate that ionospheric delays obtained throughout PPP-AR estimation are actu ally ionospheric observables. Ionospheric observables are biased by an order of few meters caused by the receiver hardware biases. These biases prohibit the use of PPP-WIZARD ionospheric delays to produce ionospheric models. Receiver biases correction is essential to provide ionospheric delays while using PPP-AR based ionospheric observables. In this contribution, a method was implemented to estimate and mitigate receiver hardware biases influence on slant ionospheric observables from PPP-AR. In order to assess the proposed approach, PPP-AR data from 12 GNSS stations were processed over a two-month period (March and April 2018). A comparison between IGS ionospheric products and PPP-AR based ionospheric observables corrected for receiver biases, resulted in a mean of differences of −39 cm and 51 cm standard deviation. The results are consistent with the accuracy of the IGS ionospheric products, 2–8 TECU, considering that 1 TECU is ~16 cm in L1. In another analysis, a comparison of ionospheric delays from 5 pairs of short baselines GNSS stations found an agreement of 0.001 m in mean differences with 22 cm standard deviation after receiver biases were corrected. Therefore, the proposed solution is promising and could produce high quality (1–2 TECU) slant ionospheric delays. This product can be used in a large variety of modeling approaches, since ionospheric delays after correction are unbiased. These results indicate that the proposed strategy is promising, and could benefit applications that require accuracy of 1–2 TECU (~16–32 cm in L1).     

Experimental study of hydrogen-rich/oxygen-rich gas-gas injectors

Five types of coaxial injectors were investigated experimentally using hot hydrogen-rich gas and oxygen-rich gas, which were respectively provided by a GH2/GO2 hydrogen-rich perburner and a GH2/GO2 oxygen-rich preburner. The injectors were the shear coaxial injector, the oxidizer post expansion coaxial injector, the fuel impinging coaxial injector, the central body coaxial injector, and the shear tri-coaxial injector. The characteristic velocity efficiency and the combustor＇s wall temperatures were obtained for different design parameters through the experiments. It can be con- cluded that angles of the oxidizer post expansion and the fuel impinging have little influence on the combustion performance and the wall temperatures. The contact area between fuel and oxidizer and the mass flow rate have significant impacts on the combustion performance. The shear tri-coaxial injector has the best combustion performance but also the highest wall temperatures among the five types of injectors.     

A novel environmental control system based on membrane dehumidification

This paper conducts a simulation study of a novel aircraft environmental control system based on membrane dehumidification(MD-ECS),and compares the system with the up-to-date four-wheel high pressure de-water system(4WHPDW-ECS).Mathematical models for the two systems are established,and a system simulation using a numerical technique is performed to analyze and compare the cooling performance of the two systems.Simulation results show that the cooling capacity of MD-ECS is much higher than that of 4WHPDW-ECS under the same working conditions,indicating that the novel system is theoretically feasible and promising.The effects of the sweep ratio of the membrane dehumidifier on the dehumidification and cooling performance of the system is also investigated.     

Comparison of model and experimental ionospheric parameters at high latitudes

Modern use and study of the auroral region needs to attract a wider class of models for describing conditions of radio wave propagation in the ionosphere. In this paper the possibilities of the International Reference Ionosphere model, well-proven and widespread in the mid-latitudes, are investigated in the high latitude zone. Model and measured values of the critical frequency foF2 for two mid-latitude stations (Juliusruh and Goosebay) and four high-latitude ones (Loparskaya, Sodankyla, Sondrestrom, Thule) are compared. Deviations of medians, variations from day to day and solar activity trends seemed to be similar for both areas. This similarity is irrespective of the RZ12 index. Special attention is paid to the TEC parameter and its determination using 6 versions of models, a new version of the model IRI2010 (IRI-Plas) among them. It is shown that the IRI-Plas model significantly improves the definition of TEC in contrast to the versions of IRI2007 and the new model NeQuick. The use of the median of the experimental equivalent slab thickness, together with the current values of the TEC, increases by a factor of two the agreement between calculated and measured foF2 values as compared with the variations from day to day. This allows foF2 to be defined in near-real time.