动态差压检测系统的共模误差研究

主要针对以差压变送器为核心的动态差压检测系统的特点 ,应用流体网络分析方法 ,提出了动态差压检测系统中的共模误差问题。理论分析和仿真计算结果表明 :共模误差与检测系统两侧引压管路的不一致性直接相关 ,为了获得动态差压信号的准确检测 ,必须对动态差压检测系统的共模误差予以抑制     

水洞动态测力和流动显示一体化实验技术

研制能够用于低速水流中的三分量内式测力天平,结合氢气泡(或染色液)方法,在水洞(槽)中实现测力和流动显示实验同步进行的动态实验系统,克服了通常测力和流动显示分别在风洞和水洞中进行,实验条件不同给结果分析带来的困难。天平采用高精度位移传感器,避开传统的应变片技术应用于水中所遇到的技术困难。简易飞行器模型的静态和等速俯仰实验结果表明了测量系统的可靠性。     

螺旋桨滑流对飞机绕流影响的试验研究

在国产双涡桨支线飞机发展过程中，曾专门研究过螺旋桨滑流对飞机表面压力分布的影响。本文以此为基础，从滑流对飞机绕流影响出发，研究了螺旋桨滑流引起飞机气动特性的变化，重点讨论了气动特性变化的机理。     

动态三角翼的非定常气动特性和压力分布相关研究

文章介绍了不同后掠角三角翼在进行俯仰振荡时的动态压力特性,说明这种动态压力特性同三角翼的法向力的变化是密切相关的,试验研究揭示了流态、压力和气动力之间的密切关系。同时试验研究显示三角翼上翼面压力的动态变化曲线呈现出双峰形态;不同后掠角三角翼在动态试验过程中压力、法向力都具有相似特性。     

液体压力激波加工技术研究

机械产品的零部件，通常需要通过成形与改性才具有所需形状及实用功能，本文提出了一种新型材料成形与改性加工的方法——液体压力激波加工。采用脉冲超声波聚焦技术，通过压电陶瓷激波发生器在液体介质中产生高能瞬时压力激波，对材料进行冲击，产生变形或表面改性。经过理论研究和试验验证，初步掌握了液体压力激波的产生、激波能量的控制和激波加工的动力学机制。这种加工方法具有能量可控性好、成本低廉和安全高效等优点，非常适合具有复杂结构和型面的中小零件加工，是一种颇具竞争力的先进制造技术手段。     

The development of a Russian communication satellite of small class, operating in the geostationary and high-elliptical orbits

In 1994-1995 Lavochkin Association (Russia) together with the other enterprises in accordance with technical requirements of the Russian Space agency, developed a new Russian communication satellite of a small class that will operate in both the geostationary (GSO) and high-elliptical (HEO) orbits. This satellite may be injected into operational orbits using a SOYUZ-2 launch vehicle (LV) and a FREGAT upper stage (US) from Plesetsk and Baykonur space launch sites (SLS).The main reason for creating such a satellite was to decrease the cost of the support and development of the Russian communication geostationary satellites group.Russian satellites Horizont, Express, Ekran and Gals, which operate in GSO, are the basis of the space segment for communications, radio and TV broadcasting. All of these satellites are injected into GSO by the PROTON LV. PROTON is a launch vehicle of a heavy class. The use of a middle class LV instead of a heavy class will allow to reduce considerably the launch cost. The change of a heavy class LV to a LV of middle class determined one economic reason for this project. Besides, the opportunity to launch S/C into GSO from Russian Plesetsk SLS increases the independence of Russia in the domain of space communications, despite the presence of the contract with Kazachstan about the rent of Baykonur SLS. Finally, use of small satellites with a rather small number of transponders is more effective than the use of big satellites. It will allow also to increase a satellite group (by the launch of additional satellites) precisely in accordance to the development of the ground segment.     

空气压强对激光推进器冲量耦合系数影响

设计并加工了激光推进器实验模型,以空气为推进工质,利用脉冲式CO2激光器,研究了空气压强对激光推进器冲量耦合系数影响。实验结果表明,空气压强对激光推进器性能有显著影响。在文中实验条件下,当空气压强大于6 kPa时,激光推进器冲量耦合系数随压强减小而减少较慢;当空气压强小于6 kPa时,激光推进器冲量耦合系数随压强减小而减少很快。     

一种大容量100MHz数据采集记录系统的设计实现

本文提出一种实用的高速数据采集记录系统的设计方案,介绍该系统中各主要模块的功能与设计思路,讨论高速数据存储模块的设计,控制调度流程与高速数字电路设计相关处理方法。针对高速与大容量的数据采集特点,提出用存储速率受限的FLASH芯片来实现高速、大容量数据采集记录的设计方法。     

Numerical Simulation of Impact Loading on Solid Propellant Within an Orthotropic Shell

The strain–stress state of the solid propellant rocket engines (SPREs) is simulated under impact. The effect of orientation of elastic and strength properties of orthotropic organoplastic shell material on the strain–stress state of the solid propellant is investigated. Normal and oblique impact of single steel cylinder projectiles, both simultaneous and at different times of multiple, converging steel spheric particles with SPRE are investigated in this study. The investigation is conducted numerically. The numerical modeling was carried out in a three-dimensional formulation by the method of finite elements for the continuous approach of the mechanics of a deformable solid. The destruction of the anisotropic material is described by the tensor-polynomial criterion of the fourth degree, which takes into account the influence of hydrostatic pressure.     

一种新的运载火箭上面级和航天器轻型增压系统

为减小运载火箭上面级和航天器增压系统的体积和质量，设计了一种新的轻型主、副两路定压力值控制增压系统。该系统可最大限度利用气瓶内气体，具有冗余增压结构，提高了系统可靠性，并设置气动隔离活门。适于多次启动飞行，且结构简单。有关的测试和飞行试验结果表明，所设计的增压系统主、副路工作协调，反应迅速，性能稳定可靠。