Effects of yaw-roll coupling ratio on lateral-directional aerodynamic characteristics

Experimental investigation of large amplitude yaw-roll coupled oscillations was conducted in a low-speed wind tunnel using an aircraft configuration model. A special test rig was designed and constructed to provide different coupled motions from low to high angles of attack.A parameter ‘‘coupling ratio" was introduced to indicate the extent of yaw-roll coupling. At each pitch angle, seven coupling ratios were designed to study the yaw-roll coupling effects on the lateraldirectional aerodynamic characteristics systematically. At high angles of attack, the damping characteristics of yawing and rolling moments drastically varied with coupling ratios. In the coupled motions with the rotation taking place about the wind axis, the lateral-directional aerodynamic moments exhibited unsteady characteristics and were different from the ‘‘quasi-steady" results of the rotary balance tests. The calculated results of the traditional aerodynamic derivative method were also compared with the experimental data. At low and very high angles of attack, the aerodynamic derivative method was applicative. However, within a wide range of angles of attack, the calculated results of aerodynamic derivative method were inconsistent with the experimental data, due to the drastic changes of damping characteristics of lateral-directional aerodynamic moments with yaw-roll coupling ratios.     

国产元器件高可靠装联常见问题及其启示北大核心CSCD

针对航天高可靠、长寿命电子产品用国产元器件,通过近年元器件国产化的应用实践,从电子装联的角度,对元器件国产化过程中的常见共性问题进行了分析和总结,并浅谈了元器件国产化过程中这些问题对我们的启示及后续应注意的问题及相关建议。     

工艺参数对电弧增材制造2219铝合金微气孔缺陷的影响分析北大核心CSCD

微气孔是电弧增材制造2219铝合金面临的主要问题。采用Advanced CMT+P(变极性CMT+脉冲)熔滴过渡模式,研究了EP/EN(正负半周波数)、扫描速度、送丝速度等电弧增材工艺参数对成形2219铝合金微气孔缺陷的影响规律。结果表明:通过改变EP/EN、扫描速度、送丝速度等参数调控热输入可影响气孔率;在热输入较低时,气孔以形核和长大为主,随热输入增加微气孔数量增多、尺寸增大;在热输入较高时,气孔逸出开始占优,随热输入增加微气孔数量减少;在热输入低至230.5或高至439.5 J/mm时,平均气孔率均可降低至0.2%以下。     

RNSS/INS深耦合高动态导航接收机测试方法研究CSCD

卫星导航和惯性导航采用深耦合方式实现导航作为世界上最先进的导航形式,在国防中的应用越来越广泛,但其在高动态下的性能需要验证。当前针对深耦合高动态下导航接收机的测试研究较少,本文介绍了基于卫星信号模拟器的测试系统组成及测试用高动态场景,运用模拟测试原理,通过对导航接收机在高动态下定位速度和跟踪灵敏度的测试及其结果分析,验证了导航接收机的深耦合功能,对此类接收机的测试方法进行了初步探究。     

(70~100)MeV准单能中子参考辐射场设计

国内基于串列加速器建立了144keV~15MeV的单能中子参考辐射场,解决了20MeV以下能区中子探测器注量、剂量等参数的量值溯源,但尚未建立20MeV以上能区准单能中子参考辐射场。随着航天空间中子探测任务的需要以及地面高能质子加速器的发展,20MeV以上能区准单能中子参考辐射场需求越来越突出。发展20MeV以上能区高能中子参考辐射场对于满足国防需求、推动中子计量学科发展具有重要意义。     

再生型木塑复合材料的研究

为了充分利用城市固体废弃物中的各项资源,本项工作将固体废弃物中的高密度聚乙烯(H igh dens itypo lyethy lene,HDPE)回收后与废弃的木纤维进行复合,成功地制备出再生型木塑复合材料。研究了木纤维长度、含量以及相容剂对木塑复合材料热性能和力学性能的影响。通过扫描电子显微镜观察了复合材料的冲击断口形貌,分析了此类复合材料的断裂机制。结果表明:木纤维的加入使HDPE的结晶温度降低,结晶速度减慢;相容剂的加入大大改善了木纤维与基体树脂之间的界面结合。随着木纤维含量的增加,木塑复合材料的弯曲强度升高,冲击强度下降。     

A global survey of COSMIC ionospheric peak electron density and its height: A comparison with ground-based ionosonde measurements

With a network of ground-based ionosondes distributed around the world, the ionospheric peak electron density and its height measured by FORMOSAT-3/COSMIC satellites in terms of GPS radio occultation technique are extensively examined in this article. It is found that, in spite of the latitude, the mean values of the peak electron density measured by COSMIC satellites are systematically smaller than those observed by ground-based ionosondes. The discrepancy between them is dependent on the latitude, namely, it is small in low and mid-latitudes and large in high-latitude region. Moreover, statistical analysis shows that the slopes of the regression line that is best fitted to the scatter diagram of occultation-retrieved peak electron density (ordinate axis) versus ionosonde-observed peak density (abscissa axis) are universally less than one. This feature is believed to be the result of path average effect of non-uniform distribution of the electron density along the GSP ray during the occultation. A comparison between COSMIC-measured peak height and ionosonde-derived peak height hmF2 indicates that the former is systematically higher than the latter. The difference in the two can be as large as 20% or more in equatorial and low-latitude regions. This result implies that the peak height hmF2 derived from the virtual height through true height analysis based on Titheridge method seems to underestimate the true peak height. The correlation between COSMIC and ionosonde peak electron densities is analyzed and the result reveals that correlation coefficient seems to be dependent on the fluctuation of the occultation-retrieved electron density profile. The correlation will be higher (lower) for the electron density profiles with smaller (larger) fluctuations. This feature suggests that the inhomogeneous distribution of the electron density along the GPS ray path during the occultation plays an important role affecting the correlation between COSMIC and ionosonde measurements.     

Study of maximum electron density NmF2 at Karachi and Islamabad during solar minimum (1996) and solar maximum (2000) and its comparison with IRI

The monthly hourly medians of maximum electron density, N_mF₂, at two Pakistani ionospheric stations, Karachi and Islamabad, have been determined for solar minimum (1996) and solar maximum (2000) and compared with IRI predictions using the URSI coefficients. At night and pre-noon period the N_mF₂ values at both stations are almost equal during the 2 years. However, at post-noon the values at Karachi are considerably larger than those at Islamabad due to the equatorial or geomagnetic anomaly. Karachi (geomag. coord. 16.44°N, 139.08°E) lies near the region of the equatorial anomaly (+20 and −20 geomagnetic latitude), so most of the N_mF₂ values at Karachi are larger than those at Islamabad (geomag. coord. 24.46°N, 145.67°E). The maximum monthly values of N_mF₂ show a semi-annual variation at Karachi and Islamabad both during 1996 and 2000 as predicted by IRI.     

矩形截面管道气流中横向运动颗粒的碰壁条件

分析了矩形截面管道气流中横向运动颗粒的运动轨迹及碰壁条件,研究表明颗粒飞出的临界速度随着颗粒直径的增大而减小,当颗粒直径较小时受来流密度、马赫数影响较大,总趋势是来流密度、马赫数越大,颗粒越不容易与上壁面碰撞。但随着颗粒直径的增大,来流条件对颗粒是否碰壁的影响逐渐减弱,决定因素是颗粒直径的大小和颗粒的喷射速度。     

基于划分检测模型的终端区异常轨迹检测方法

针对异常轨迹对轨迹聚类效果的影响以及给进离场程序管制适用性的量化分析提供分析数据的考虑,在结合数据挖掘中异常检测理论的基础上,利用划分检测框架及将距离和密度结合起来,设计了一种有效检测算法,运用到终端区飞行轨迹的异常检测当中,检测出飞行轨迹中的异常轨迹,从而改善轨迹的聚类效果。实例仿真结果表明：方法可以准确地检测出异常轨迹。