Particle simulation of grid system for krypton ion thrusters

The transport processes of plasmas in grid systems of krypton (Kr) ion thrusters at different acceleration voltages were simulated with a 3D-PIC model, and the result was compared with xenon (Xe) ion thrusters. The variation of the screen grid transparency, the accelerator grid current ratio and the divergence loss were explored. It is found that the screen grid transparency increases with the acceleration voltage and decreases with the beam current, while the accelerator grid current ratio and divergence loss decrease first and then increase with the beam current. This result is the same with Xe ion thrusters. Simulation results also show that Kr ion thrusters have more advantages than Xe ion thrusters, such as higher screen grid transparency, smaller accelerator grid current ratio, larger cut-off current threshold, and better divergence loss characteristic. These advantages mean that Kr ion thrusters have the ability of operating in a wide range of current. Through comprehensive analyses, it can be concluded that using Kr as propellant is very suitable for a multi-mode ion thruster design.     

热-机耦合分析的有限元法及其应用

基于有限元分析的基本原理,建立了热-机耦合问题分析的有限元基本方程,并对工件挤压过程及摩擦制动问题进行了分析。算例表明,热-机耦合分析方法能很好地模拟受热结构的温度场和应力应变场,为结构设计和工艺设计提供依据。     

考虑轨道摄动的外热流计算分析

为改进传统外热流算法未考虑外热流经多次反射后的吸收和国外商业软件未考虑轨道摄动及太阳矢量变化对外热流的影响等不足,重新定义了外热流角系数和外热流辐射传递因子,综合SGP4轨道模型和Gebhart方法,给出了考虑摄动等因素的辐射传递因子和轨道外热流计算模型,以及相应的计算流程。通过仿真分析论证了考虑多次反射及摄动等因素的重要性。     

非开普勒轨道下卫星交会变轨决策研究

针对卫星在非开普勒轨道下的运动特征,提出了研究卫星交会变轨决策的方法。首先,在Hill坐标下,采用比例导引方法求解卫星进行变轨机动时所需要的速度增量。然后,再通过Lagrange插值算法解出卫星在任意特征点上变轨机动所需要的速度增量,根据数字仿真得出大量的仿真数据并画出满足变轨决策条件的决策曲面。最后,对决策曲面的涵义做出分析,说明了该方法对于研究非开普勒轨道下卫星变轨决策问题具有一定的意义。     

Singularity analysis for single gimbal control moment gyroscope system using space expansion method

Control Moment Gyroscope (CMG) is an effective candidate for agile satellites and large spacecraft attitude control because of its powerful torque amplification capability. The most serious situation, however, in using CMG is the inherent geometric singularity problem, where there’s no torque output along a particular direction. Space expansion method has been proposed in this work for the singularity analysis. Based on inverse mapping transformation, an expanded Jacobian matrix which is a full rank square matrix is obtained. The singular angle sets of the 3-parallel cluster and pyramid cluster are distinguished using space expansion method. An effective hybrid steering strategy, able to deal with the elliptic singularity, is further proposed. Simulation results demonstrate the excellent performance of the proposed steering logic compared to the generalized singular robust logic and pseudo inverse logic in terms of energy consumption and torque error.     

运动单站干涉仪相位差直接定位方法

针对传统干涉仪测向定位在低信噪比(SNR)下性能降低、多频段系统复杂等缺点,本文直接利用运动单站干涉仪模糊相位差(PD)实现对地面静止辐射源定位.为解决该定位问题,结合干涉仪相位差的几何特性,提出了一种多角度距离参数化高斯和滤波(MB-RP-GMF)定位解算方法,利用相位差误差检测获得多个初始方位角,通过距离参数化得到一组滤波初始值,采用扩展卡尔曼滤波(EKF)进行定位计算.仿真结果表明,该定位方法在低信噪比下优于仅测向(BO)定位,且仅采用一组干涉仪便可对多个频段辐射源进行定位.     

铝合金含硅量的测定方法

Ｎ２Ｏ－Ｃ２Ｈ２原子吸收光谱法测定卫星系统电池外壳铝合金中的硅含量。讨论了燃烧器高度、燃助比、共振线等测定条件的选择方法，以及酸度、温度和Ｎ２Ｏ－Ｃ２Ｈ２火焰区对测定精度的影响。实际应用证明，该方法灵敏度高，干扰小，选择性和重复性好，并具有操作简便，易掌握，分析周期短等特点；精密度和准确度均能满足卫星系统电池外壳体研制的要求。     

运输环境中某战术导弹结构振动特性分析

应用三维有限单元和导弹实体简化模型对一种战术导弹的结构振动特性进行分析，并动用ＡＮＳＹＳ有限元分析程序，计算得到了“自由－固支”条件下，导弹竖立状态的固有模态，取得了与试验和数据基本一致的结果，证明了所建模型物正确性，进而对运输环境中导弹水平支承条件下的固有频率和振型进行了分析计算，所得结果为导弹的使用可靠性分析提供了依据。     

改进的电热除冰系统的仿真方法

建立了电热除冰系统矩形微段的二维简化物理模型，采用焓法模型建立相变导热问题的微分控制方程，用控制容积法对该模型的控制方程及其边界、初始条件进行离散，使用块修正技术对原有的离散方程组的求解方法进行了改进，得到各个时刻的温度分布及冰的融解情况。计算结果与国外文献结果吻合，验证了改进的算法和程序的正确性。并计算分析了时间步长的选择、网格的划分对计算结果的影响。     

同伦法在现代飞机尾旋预测中的应用

在利用ＢＡＣＴＭ法对高性动性能飞机尾旋预测中，首先要求解平衡解，为此需要使用静态，强迫振荡天平气动模型和旋转天平气动模型，而在两气动模型转换过程中，常常遇到难找或不断得到平衡解的问题，针对这一问题，利用同伦法对气动模型进行处理，有效地了解决了该问题，同时，结合某战斗机进行了有关尾旋的计算和预测，结果表明，所提出的方法是可靠和切实可行的。