行星际磁云与日球电流片相互作用的实例分析

基于1995-2007年Wind飞船观测到的105个磁云事件, 按照磁云在地球附近是否与日球电流片发生碰撞, 将其分为碰撞和未碰撞两类, 得到初步分析结果. ①可能与日球电流片发生碰撞的磁云事件有51例, 约占事件总数的49%; ②发生碰撞时, 磁云与日球电流片之间的相互作用区内呈现动力学相互作用增强的趋势, 例如多呈现局部的磁场方向间断结构(或称局域电流片结构), 伴随磁场强度下降、质子温度升高、部分质子速度分量出现跃变, Langmuir波或100~250,kHz的离子声波出现增强,这些现象可能与碰撞相互作用区域内发生的磁重联有关; 没有碰撞时这些特征一般不明显; ③至少有15个事例中, 磁云前后背景磁场的极性相反, 或磁场极性反转的位置位于磁云内部, 显示磁云可能正在跨越电流片运动; ④在几个磁云事件中发现磁云的亮环和亮核纤维结构. 这些极为初步的分析结果有利于了解磁云与日球电流片之间的相互作用过程.      

电离层等效电流体系对行星际激波的响应研究

行星际激波是导致地球磁层-电离层系统发生扰动的重要原因之一,其可以通过对磁层-电离层系统电流体系的改变来影响地磁变化.本文采用全球三维磁流体力学数值模拟方法,分析了行星际激波作用下电离层等效电流体系的即时响应.模拟结果表明,在激波作用下伴随着异常场向电流对的产生,电离层在午前午后出现一对反向的等效电流涡.这对涡旋一边向极侧和夜侧运动,一边经历强度增强和减弱直至消失的过程.激波过后等效电流体系图像逐渐演化为激波下游行星际条件控制的典型图像.这个响应过程与行星际激波强度有关,激波强度越强,则反向的等效电流涡旋强度越大,寿命也就越短.      

高超声速层流干扰流场研究

文章研究了高超声速来流绕三维凸起物的层流干扰流场特征。研究工作在M=8轻活塞式炮风洞内完成，通过可改变楔角的模型试验给出纹影照片与特征位置的表面压力分布，分析了楔角变化引起的流动分离范围的变化、激波系的生成与演变以及压力分布及压力峰值改变规律。     

Experimental investigation of expansion effect on shock wave boundary layer interaction near a compression ramp

The experiment is conducted to investigate the effect of expansion on the shock wave boundary layer interaction near a compression ramp. The small-angle expansion with an angle degree of 5° occurs at different positions in front of the compression ramp. The particle image velocimetry and flow visualization technology show the flow structures, velocity field, and velocity fluctuation near the compression ramp. The mean pressure distribution, pressure fluctuation, and power spectral density are me...     

“人字形小肋”对激波/边界层干扰的影响研究

在曼彻斯特大学跨声速风洞开展激波/边界层干扰及“人字形小肋”对其影响的实验研究。在马赫数1.85流场条件下,应用高速纹影、油流、皮托压力测量和基于压敏漆的壁面压力测量技术,研究“人字形小肋”流动控制方法对激波/边界层干扰的流动分离结构与尺寸、压力分布特性与波系特征等影响。结果显示激波/边界层干扰诱发流动分离,分离区呈现三维特征,在“人字形小肋”的作用下,分离线呈现“波浪”形且整体向上游移动,干扰区流向尺寸增大,分离区高度减小且长度略增大,再附区的压力极值降低,这些特征与叶片、尖楔等微涡发生器的影响趋势相反。下一步工作中,拟针对“人字形小肋”开展参数优化研究,“人字形小肋”可能成为降低激波/边界层干扰诱发的高热流载荷的有效方法。     

Criteria for hypersonic airbreathing propulsion and its experimental verification

Hypersonic airbreathing propulsion is one of the top techniques for future aerospace flight, but there are still no practical engines after seventy years' development. Two critical issues are identified to be the barriers for the ramjet-based engine that has been taken as the most potential concept of the hypersonic propulsion for decades. One issue is the upstream-traveling shock wave that develops from spontaneous waves resulting from continuous heat releases in combustors and can induce unsteady combustion that may lead to engine surging during scramjet engine operation. The other is the scramjet combustion mode that cannot satisfy thrust needs of hypersonic vehicles since its thermos-efficiency decreases as the flight Mach number increases. The two criteria are proposed for the ramjet-based hypersonic propulsion to identify combustion modes and avoid thermal choking. A standing oblique detonation ramjet (Sodramjet) engine concept is proposed based on the criteria by replacing diffusive combustion with an oblique detonation that is a unique pressure-gain phenomenon in nature. The Sodramjet engine model is developed with several flow control techniques, and tested successfully with the hypersonic flight-duplicated shock tunnel. The experimental data show that the Sodramjet engine model works steadily, and an oblique detonation can be made stationary in the engine combustor and is controllable. This research demonstrates the Sodramjet engine is a promising concept and can be operated stably with high thermal efficiency at hypersonic flow conditions.     

水下固体火箭发动机垂直气体射流结构和推力影响研究

为了探究高背压水介质条件下,固体火箭发动机垂直气体射流在浮力影响下的流场结构和发动机推力特点,建立了轴对称几何模型,在考虑有/无浮力的条件下,采用VOF(Volume of fluid)多相流模型进行气体-水两相耦合仿真计算,获取尾流气体射流流场结构,以及发动机尾部壁面受力和推力振荡曲线进行分析.研究结果表明,考虑浮力...     

Investigation of dual ignition for a detonation-driven shock tunnel in forward driving mode

A detonation-driven shock tunnel is useful as a ground test facility for hypersonic flow research. The forward detonation driving mode is usually used to achieve high-enthalpy flows due to its strong driving capability. Unfortunately, the strong detonation wave front results in diaphragm fragments that disturb the test flow and scratch the nozzle or test models. In this study, a dual ignition system was developed to burst a metal diaphragm without fragmentation in the forward driving mode. A series of experiments were conducted to validate the proposed technique. The influences of the delay time setting on the test conditions were investigated in detail. Numerical simulations were also conducted to obtain a better understanding of the wave processes in the shock tube. The results showed that the dual ignition system solved the diaphragm issues in the forward driving mode. The test time was shortened due to the additional ignition close to the primary diaphragm; the smaller the delay time, the shorter the effective test time. However, a small amount of time loss is considered worthwhile because the severe diaphragm problems have been solved.     

基于人工黏性的二维激波小波多尺度数值计算

基于自适应小波配点法和人工黏性，构造了二维激波问题的小波数值计算格式。利用最细尺度的小波系数构造两组激波定位函数，分别用以控制两个正交方向人工黏性的大小和分布。对三类二维激波问题进行计算和验证，结果表明：自适应小波配点法利用小波阈值滤波删除变化平缓区域大量网格点，而保留变化急剧区域的网格点，比传统方法计算效率高，且分辨率越高，计算效率更高；利用最细层小波系数构建的幂函数形式的激波定位函数能准确判断激波位置和控制X、Y方向人工黏性的大小和分布，从而捕捉不同方向和不同强度的激波。     

关于冲击信号的数字处理方法研究

介绍了冲击信号各面指标的计算方法,并着重介绍了如何将数字信号处理方法应用于冲击信号的处理中。