Tensile properties analysis of CFRP-titanium plate multi-bolt hybrid joints

Hybrid joints have better tensile properties than pure bonded and bolted bolts, and are increasingly used in the aerospace field. Tensile tests are carried out for the Hybrid Bonded/Bolted(HBB) joints of Carbon Fiber Reinforced Polymer(CFRP) laminate and titanium alloy plate under different bolt numbers, and the corresponding load–displacement curves are obtained. At the same time, based on Continuum Damage Mechanics(CDM) theory, which is derived from 3D Hashin failure criteria, and a Cohesive Z...     

某刹车装置的活塞组件衬套裂纹机理探究

某刹车装置耐久性试验中,活塞组件的衬套出现疲劳裂纹,经分析是由于汽缸座和刹车壳体外翘,活塞在与刹车盘间的摩擦力作用下对衬套外端产生交变挤压所致,试验验证结果成立,证明产品刚性影响构件的疲劳寿命。     

求解弹性平面问题新的有限元应力法

本文提出一种用于求解弹性平面问题新的有限元应力法     

Surface integrity and fatigue behavior when turning γ-TiAl alloy with optimized PVD-coated carbide inserts

This paper presents a comprehensive investigation on the effects of tool and turning parameters on surface integrity and fatigue behavior in turning c-Ti Al alloy. The wear of inserts surface, cutting forces, and surface roughness were studied to optimize PVD-coated carbide inserts.Surface topography, residual stresses, microhardness, and microstructure were analyzed to characterize the surfaces layer under different turning parameters. Surface integrity and fatigue life tests of c-Ti Al alloy were conducted under turning and turning-polishing processes. The results show that compared to CNMG120412-MF4, CNMG120408-SM is more suitable because it obtained low cutting force, surface roughness, and tool wear. With increasing the cutting speed and depth, the depths of the compressive residual stress layer, hardening layer, and plastic deformation layer increased. For turning and turning-polishing specimens, the compressive residual stress was relaxed by less than 20%–30% after 10~7 cycles. The fatigue life of a turning-polishing specimen with R_a= 0.15 mm has increased 3 times from that of a turning specimen with R_a= 0.43 mm.     

MSD薄板疲劳寿命预测

结合工程中应用最为广泛的Paris公式对多裂纹板的疲劳寿命进行了预计,计算结果与现有试验结果比较吻合,表明了该方法的可行性。由于力学响应的计算采用有限元方法,所以该方法适用于裂纹任意分布的多部位损伤板,可直接用于工程实际结构。     

预期违约制度之比较剖析--兼论《合同法》第94条第2款和第108条之规定

预期违约在现代民法中占有重要地位。本文通过对预期违约制度的历史沿革及其比较法考察，将预期违约制度与不安抗辩权进行比较，进而对预期违约制度的构成要件和补救措施等作了系统分析和探讨，旨在对我国合同立法有所启示。     

Finite Element Modelling of Failure of a Multi-Material Target due to High Velocity Space Debris Impacts

Lagrangian finite element methods have been used extensively in the past to study the non-linear transient behaviour of materials, ranging from crash tests of cars to simulating bird strikes on planes. However, as this type of space discretisation does not allow for motion of the material through the mesh when modelling extremely large deformations, the mesh becomes highly distorted. This paper describes some limitations and applicability of this type of analysis for high velocity impacts. A method for dealing with this problem by the erosion of elements is proposed, where the main driver is the definition of element failure strains. Results were compared with empirical perforation results and were found to be in good agreement. The results were then used to simulate high velocity impacts upon a multi-layered aluminium target in order to predict a ballistic limit curve. LS-DYNA3D was used as the FE solver for all simulations. Meshes were generated using Truegrid.     

万能工具显微镜智能化改造

以国产新添数显万能工具显微镜为例，介绍了万能工具显微镜智能化改造的基本原理，两维测量软件的主要功能以及通用几何元素及其形位误差的数学算法，探讨了保证检测揩度的若干措施，并给出了U1、U2校准比对结果。     

导弹垂直发射装置对燃气流压强周期性振荡的响应

本文对舰载导弹垂直发射装置中的燃气流周期性振荡特性进行了分析与实验测量，对装置产生的响应特性也进行了实验研究和有限元分析。实验测量结果与理论计算在规律上有定性的一致