氧换热器在两相流条件下的压力脉动机理分析

氢氧液体火箭发动机氧换热器在研制过程中出现了压力脉动现象,影响了换热器的正常工作.以该型换热器为研究对象,将换热器分为燃气侧、汇总管、圆管等结构,进行了CFD仿真计算,与试验结果对比,修正了传热相关参数,建立了换热器理论计算模型用于参数计算;利用非线性方法分析试验数据,确定了该换热器为混沌系统;利用两相流分析与电路类比...     

带凹腔的超声速燃烧室燃烧流场数值模拟

对带凹腔结构的燃烧室二维甲烷燃烧流场进行了数值模拟.采用迎风3阶精度MUSCL格式求解二维含组分守恒N-S方程,湍流模型采用剪切修正的RNG k-e湍流模型,分别分析了凹腔不同的长深比和导流槽结构对燃料燃烧的影响;对喷甲烷燃烧工况进行了计算研究.结果表明:凹腔可以提高燃烧效率,却使总压恢复系数降低;凹腔的长深比越高,燃烧效率越高,总压恢复系数越低;在总压恢复系数较高的情况下,采用导流槽可进一步提高燃烧效率.     

Accurately predicting hypersonic transitional flow on cone via a symmetry approach

A new algebraic transition model is proposed based on a Structural Ensemble Dynamics (SED) theory of wall turbulence, for accurately predicting the hypersonic flow heat transfer on cone. The model defines the eddy viscosity in terms of a two-dimensional multi-regime distribution of a Stress Length (SL) function, and hence is named as SED-SL. This paper presents clear evidence of precise predictions of transition onset location and peak heat flux of a wide range of hypersonic Transitional Boundary Layers (TrBL) around straight cone at zero incidence, to an unprecedented accuracy as validated by over 70 measurements for varying five crucial influential factors (Mach number, temperature ratio, cone half angle, nose Reynolds number and noise level). The results demonstrate the universality of the postulated multi-regime similarity structure, in characterizing not only the spatial non-uniform distribution of the eddy viscosity in hypersonic TrBL on cone, but also the dependence of the transition onset location on the five influential factors. The latter yields a novel correlation formula for transition center Reynolds number which takes similar functional form as the SL function within the symmetry approach. It is concluded that the SED-SL model simulates TrBL around cone with uniformly high accuracy, and then points out to an optimistic alternative way to construct hypersonic transition model.     

PGE/ Phenolic 的动态热解对温度场计算的影响

通过建立材料动态热解情况下的非稳态导热微分方程,研究了PGE/ Phenolic 的动态热解对温度 场计算的影响,并将理论计算值与地面试验的实测值进行了对比分析。结果表明,对PGE/ Phenolic 考虑动态 热解能有效修正温度场计算的精度,使理论计算值与实测值更为接近。     

Heat transfer characteristics in a narrow confined channel with discrete impingement cooling

Heat transfer characteristics in a narrow confined channel with discrete impingement cooling were investigated using thermal infrared camera. Detailed heat transfer distributions and comparisons on three surfaces with three impact diameters were experimentally studied in the range of Reynolds number of 3000 to 30000. The experimental results indicated that the strong impingement jet leaded to a high strength heat transfer zone in the ΔX=±2.5D_j range of the impact center,which was 1.3–...     

Hypersonic shock wave and turbulent boundary layer interaction in a sharp cone/flare model

A direct numerical simulation of hypersonic Shock wave and Turbulent Boundary Layer Interaction(STBLI) at Mach 6.0 on a sharp 7° half-angle circular cone/flare configuration at zero angle of attack is performed. The flare angle is 34° and the momentum thickness Reynolds number based on the incoming turbulent boundary layer on the sharp circular cone is Re_θ = 2506. It is found that the mean flow is separated and the separation bubble occurring near the corner exhibits unsteadiness. The Reynolds analogy factor changes dramatically across the interaction, and varies between 1.06 and 1.27 in the downstream region, while the QP85 scaling factor has a nearly constant value of 0.5 across the interaction. The evolution of the reattached boundary layer is characterized in terms of the mean profiles, the Reynolds stress components, the anisotropy tensor and the turbulence kinetic energy. It is argued that the recovery is incomplete and the near-wall asymptotic behavior does not occur for the hypersonic interaction. In addition, mean skin friction decomposition in an axisymmetric turbulent boundary layer is carried out for the first time. Downstream of the interaction, the contributions of transverse curvature and body divergence are negligible, whereas the positive contribution associated with the turbulence kinetic energy production and the negative spatial-growth contribution are dominant. Based on scale decomposition, the positive contribution is further divided into terms with different spanwise length scales. The negative contribution is analyzed by comparing the convective term, the streamwise-heterogeneity term and the pressure gradient term.     

A multi-parameter model of heat treatment process for soft magnetic materials on performance of HSERs

Material properties play an important role in the performance of electromagnetic mechanism. For an aeronautic Hermetically-Sealed Electromagnetic Relay (HSER), more than 50% parts are made of soft magnetic materials. Therefore, the performance of soft magnetic materials directly determines the static and dynamic characteristics of the HSER. Based on the theory of crystal recrystallization, this paper analyzes cold extrusion and heat treatment in the processing of soft magnetic materials, simulates the grain change process of an armature at different heat treatment temperatures, establishes a correlation model of temperature, grain size, and magnetic energy, and verifies results by scanning electron microscopy. Results of heat treatment temperatures from 800 °C to 920 °C are obtained and compared. A sample soft magnetic material after heat treatment at different temperatures has the largest difference in the initial magnetization range, up to 22%. In order to verify the fluctuation of the overall output characteristics of an HSER caused by the difference between soft magnetic materials, a static and dynamic analysis model of a typical HSER is established, and the accuracy of the model is verified by a set of actual test system. The difference of dynamic characteristics under different heat treatment temperatures is nearly 3%.     

溢流槽对二元高超声速进气道性能的影响研究

首先对澳大利亚HyShot计划进气道模型进行了数值模拟，得到了设计状态及非设计状态下的流场特征，以及进气道性能随来流马赫数的变化规律。根据分析，提出了在二元高超声速进气道内压段开设溢流槽的设计思路，设计了工作马赫数4.0～6.0范围的二元高超声速进气道，并给出了通过抬高或降低原设计槽口高度得到的两种新的开槽方案进气道的物理模型。通过数值模拟，结果表明：溢流槽有效改善了进气道的性能，拓宽了进气道的工作范围，槽口高度的不同对进气道性能有相当大的影响。     

基于FY-3C/VIRR地表温度数据的上海市热岛效应时空特征分析

城市热岛效应是当前城市生态领域关注的焦点问题之一。本文以上海为例，基于FY-3C/VIRR LST数据，通过计算研究区的热岛强度指数与热岛比例指数，定量分析上海市2019年全年城市热岛效应的时空变化特性。结果表明：上海市2019年全年各月份的总热岛区域面积均在40%以上，城市热岛效应较为显著，其中7月份总热岛区域面积最大；上海市热岛效应的空间分布呈现出“北热南冷”的格局，热岛效应主要分布在中部和北部； 上海市5—7月热带比例指数较高，为较严重热岛，随着8月份平均地表温度的继续升高，热岛比例指数有所下降。     

Experimental study on dynamic behavior of mechanically pumped two-phase loop with a novel accumulator in simulated space environment

Mechanically pumped two-phase loop (MPTL) which is a prominent two-phase heat transfer technology presents a promising prospect in thermal control for space payload. However, transient behavior of MPTL caused by phase-change and heat sources load-on/off in simulated space environment is rarely reported. In the present study, one MPTL setup was designed and constructed, and experimentally studied. Particularly, a novel two-phase thermally-controlled accumulator integrated with passive cooling measure and three capillary structures was designed as the temperature-control device. Dynamic behavior of the start-up, temperature control, and temperature adjustment were monitored; meanwhile, thermodynamic behavior within the proposed accumulator, the operating behavior as well as the heat and mass transfer behavior between the main loop and the accumulator were revealed. The results show that the fluid management function of the capillary structures for the novel accumulator is verified. The working point of the MPTL system can be adjusted by changing the temperature control point of the accumulator and it is little influenced by external heat flux and heat sources on/off. Pressure-drop oscillations which are manifested as fluctuations of temperature and pressure can be observed after phase changing due to the compressible volume within the accumulator and the negative-slope portion of the internal pressure.