Three dimensional investigation of the shock train structure in a convergent–divergent nozzle

Three-dimensional computational fluid dynamics analyses have been employed to study the compressible and turbulent flow of the shock train in a convergent–divergent nozzle. The primary goal is to determine the behavior, location, and number of shocks. In this context, full multi-grid initialization, Reynolds stress turbulence model (RSM), and the grid adaption techniques in the Fluent software are utilized under the 3D investigation. The results showed that RSM solution matches with the experimental data suitably. The effects of applying heat generation sources and changing inlet flow total temperature have been investigated. Our simulations showed that changes in the heat generation rate and total temperature of the intake flow influence on the starting point of shock, shock strength, minimum pressure, as well as the maximum flow Mach number.     

Silver Film Growth on Glass Ceramic by Radio Frequency Magnetron Sputtering

Thin silver films are deposited by radio frequency magnetron sputtering on glass ceramic at room temperature.Variations of sputtering power,bios voltage and power density are carried out for each deposition,then parts of as-deposited samples are subjected to annealing at 600 ℃ within a vacuum chamber.Structural properties are studied by X-ray diffraction(XRD),scanning electron microscope(SEM)and laser scanning confocal microscope(LSCM).It is shown that structural properties have a strong dependency on sputtering power and annealing temperature.Electrical contact resistance measured by a four point probe instrument is directly affected by the thickness of films.It is also found that the film conductivity,especially in thinner films,is improved by the increasing grain size.Finally,the film adhesion is observed by scratch tests.And the adhesive ability deposited by radio frequency magnetron sputtering shows a better performance than that produced by traditional methods.     

Microstructure,thermophysical property and ablation behavior of high thermal conductivity carbon/carbon composites after heat-treatment

Uni-directional carbon/carbon composites with high thermal conductivity are suitable to supply continuous thermal protection for future reentry vehicles since they could reduce surface temperature and ablation rates simultaneously in harsh environments. In this work, the high thermal conductivity carbon/carbon composites were prepared by chemical vapor infiltration. After heat-treatment, both their open porosity and internal friction increase due to the fiber/matrix thermal expansion mismatch; while their thermal conductive performance become better due to more complete carbon structure. With raising heat-treatment temperature from 1800 °C to 2450 °C, the mass and linear ablation rates of C/C composites with fibers vertical to the oxyacetylene torch for 60 s decrease from 0.66 mg/s and 2.95 μm/s to 0.51 mg/s and 2.05 μm/s respectively. The improved ablation resistance is resulted from the increased thermal conductivity from 282 to 508 W/(m·K) and more carbon fibers exposed to the flame during ablation, which have better oxidation resistance than those of carbon matrix. While such ablation rates become larger for composites with fibers parallel to the flame, from 1.02 mg/s and 3.73 μm/s to 1.28 mg/s and 5.01 μm/s respectively since the ablation occurred more easily through gaps at the fiber/matrix interfaces, which become larger and are always exposed to the flame for this case.     

摆锤式冲击试验机能量损失检测方法的比较与分析

摆锤式冲击试验机的能量损失包括：指针的摩擦（或接触式电子角位移传感器的摩擦）、空气阻力和摆轴轴承的摩擦所引起的能量损失；基础的冲击、机架和摆锤的振动所引起的能量损失。国内外还没有成熟的测量方法和测量仪器测定基础的冲击、机架和摆锤的振动所引起的能量损失，没有形成技术文件，目前摆锤式冲击试验机能量损失的检测主要针对前者。本文针对国内计量部门计量摆锤式冲击试验机所依据的常用标准和规程，比较能量损失的检测方法和计算公式，做出简要分析，指出某些计算公式值得商榷之处。     

航天器空间环境干扰力矩分析与仿真研究

针对航天器在轨运行时所受到的空间环境干扰力矩进行建模分析,并通过实时解算和矢量叠加的方式进行仿真研究,尤其对太阳光压力矩与大气阻力力矩的建模与仿真提出了新的方法,该方法通过建立光照面与迎风面的判断准则,准确地对太阳光压力矩与大气阻力力矩进行了估计。对各种空间环境干扰力矩的精确建模与仿真为航天器精确姿态控制设计及系统姿态控制方案和控制执行机构的选取提供了依据,文中提出的方法简单易用,工程实现性强,为未来的工程应用提供了一定的理论依据。     

基于薄膜热电堆的新型高温瞬态热流密度传感器的研制

目前针对国内薄膜瞬态热流传感器一致性较差、制备工艺不成熟等问题，提出了一种基于光刻工艺和离子束溅射镀膜工艺的制备方法，200对T型金属薄膜热电偶沉积在10mm×10mm的水冷块上，测量1μm的氧化铝热阻层温差，从而得到瞬态热流密度值。对新型高温瞬态热流密度传感器进行比对法标定，一致性误差为0.211%，即工艺的一致性约为99.79%。实验表明，研制的新型高温瞬态热流密度传感器的一致性好,制备工艺具备良好重复性和可移植性，能够满足高温瞬态热流检测需要，为热流传感器的推广应用及标准化、批量化生产提供了良好的技术支撑。     

吸热燃料裂解催化剂CuAPSO-34的合成及性能

采用Cu离子对硅磷酸铝分子筛SAPO－34进行离子改进,成功合成出CuAPSO－34分子筛。通过XRD,SEM,EDX及NH3－TPD等分析手段对改性分子筛进行结构及酸性的表征和对照分析,表明Cu的掺入较好改变了SAPO－34分子筛的微观结构及表面酸性。通过对吸热燃料模型化合物－正庚烷进行催化裂解的对比试验,获得了转化率和低碳烯烃的收率数据。结果表明CuAPSO－34能明显提高催化活性,大幅降低裂解温度;且在经济裂解温度区间500℃－600℃对低碳烯烃的选择性亦有所提高,因而吸热 燃料能够提供更高的热沉。     

热处理工艺对30CrNiWVA钢的组织和力学性能的影响

研究了一种新型低合金超高强度钢30CrNiWVA经不同温度淬火，回火后的力学性能和微观组织的变化规律，结果发现，淬火温度在900－940℃，回火温度在340℃左右时，30CrNiWVA钢回火马氏体组织均匀细小，σb≥1700MPa,σ0.2≥1500MPa,δ5≥12%,ψ≥55%,Aku≥50J，可以满足某些航空结构件在350摄氏度回火后高强度和高韧性的要求。     

剪切波速评价饱和砂土抗液化性能研究

从三方面总结了用剪切波速评价饱和砂土抗液化性能的研究进展：基于现场震害调查的研究成果具有重要参考价值，但不便于开展系统研究；室内土样剪切波速的测试手段出现了弯曲单元和扭剪法两种新技术，与弯曲单元相比较，扭剪法更加可靠；剪切波速与抗液化强度相关性已通过大量的研究得到证实。指出要实现用剪切波速评价原位土层的抗液化性能需要解决：抗液化强度对于剪切波速的敏感性，如何进行地震等效，如何将原位与室内剪切波速建立联系以及如何选取区分不同土类的指标等4个问题。     

液晶瞬态技术测量带侧向流扰流柱通道端壁换热

采用热色液晶瞬态测量技术测量带侧向流扰流柱通道端壁全表面换热系数的分布,研究了侧流比及雷诺数对换热的影响,其中,侧流比为0.25~1.0,雷诺数为3×104~9×104。结果表明:(1)侧流比对扰流柱通道的流动形态及端壁换热有重要影响;(2)存在一个临界侧流比,在临界侧流比以下,流动形态沿主流方向呈错排流状态;在临界侧流比以上,流动形态沿侧流方向呈错排流状态;在临界侧流比附近,流动为顺排流动状态,方向在主流和侧流方向之间;(3)侧流比较小或较大时,扰流柱通道端壁换热较强;在临界侧流比附近,换热相对较弱。