Design of nanofluid-cooled heat sink using topology optimization

The paper presented topology optimization of 2D and 3D Nanofluid-Cooled Heat Sink (NCHS). The flow and heat transfer problem in the NCHS was treated as a single-phase nanofluid based convective heat transfer model. The temperature-dependent fluid properties were taken into account in the model due to the strong temperature-dependent features of nanofluids. An average temperature minimum problem was studied subject to the fluid area and energy dissipation constraints by using the density method. In the method, the design variable is updated according to the gradient information obtained by an adjoint based sensitivity analysis process. The effects of the energy dissipation constraint, temperature-dependent fluid properties and nanofluid characteristics on optimal configurations of NCHS were numerically investigated with following conclusions. Firstly, branched flow channels in the optimal configuration increased with the rise of the allowed energy dissipation. Secondly, temperature-dependent fluid properties were significant for obtaining the appropriate optimal results with best cooling performance. Thirdly, heat transfer performances of optimal configurations were enhanced by reducing the nanoparticle diameter or increasing the nanoparticle volume fraction. Fourthly, the optimal configuration for nanofluid had better cooling performance than that for its base fluid.     

某飞机上航炮的黑色磷化液的研究

飞机上常用的航炮要求具有优良的综合力学性能和抗腐蚀性能,一般都需要进行磷化处理和发蓝处理。介绍一种黑化装饰效果及抗蚀性好的钢铁件磷化液,其由黑化液和磷化液两部分组成部分。经飞机上航炮的试验研究表明：用该黑色磷化液处理后,既起到磷化的效果又进行了发黑处理;生成的黑色磷化膜,色泽乌黑纯真,并且有良好的稳定性和极强的抗蚀性能。     

Three dimensional temperature field in a conducting sphere due to an arbitrarily located split ring heating source

Thermal control of spacecrafts plays an important role in space missions. In the design stage the preliminary thermal analysis of the spacecraft requires an estimate of the conductive thermal resistance between the various spacecraft components. With this in mind, the fully three dimensional problem of determining the thermal field in a conducting sphere with an asymmetric split ring current carrying heating source is resolved in an analytical or almost analytical form, implying either a closed form solution or utmost expressions involving a simple numerical integration. This has immediate application for evaluation of thermal resistance in spacecrafts. Green's function integral techniques are used. Comparisons are made with series solutions and also with purely numerical solutions to contrast the simplicity and highlight the elegance of the present method. Parametric studies reveal expected behavior.     

基于区域热核不变量的SAR图像变化检测

快速精确地检测SAR图像的变化是SAR应用亟待解决的问题。针对这一问题,提出了基于区域热核不变量的SAR图像变化检测方法。该方法利用图上热核的特征,可以充分发挥图谱理论的优点,且计算简便、矩阵的扰动性小。通过模拟分析研究了热核的特征,并应用于实际SAR图像的变化检测。实验结果表明该方法可以快速精确地检测到变化区域,且其变化检测的精度要优于区域似然比检测方法。     

Investigation on Thermal Contact Conductance Based on Data Analysis Method of Reliability

The method of reliability is proposed for the investigation of thermal contact conductance (TCC) in this study. A new definition is introduced, namely reliability thermal contact conductance (RTCC), which is defined as the TCC value that meets the reliability design requirement of the structural materials under consideration. An experimental apparatus with the compensation heater to test the TCC is introduced here. A practical engineering example is utilized to demonstrate the applicability of the proposed approach. By using a statistical regression model along with experimental data obtained from the interfaces of the structural materials GH4169 and K417 used in aero-engine, the estimate values and the confidence level of TCC and RTCC values are studied and compared. The results show that the testing values of TCC increase with interface pressure and the proposed RTCC model matches the test results better at high interface pressure.     

双酚B型氰酸酯的制备与性能

研究了碱性催化法合成非晶态双酚B型氰酸酯的制备工艺,利用红外光谱(FTIR)、核磁共振(NMR)、热分析(DSC)、流变仪等方法分析了双酚B型氰酸酯的结构性能和工艺特性,研究和测试了树脂固化物介电性能、耐热性能和力学性能.研究结果表明,制备的双酚B型氰酸酯纯度高,200 ℃时的凝胶时间在100 min以上;该型氰酸酯具有较低的粘度(η_25℃=470 mPa·s,η_40℃=210 mPa·s),适于室温树脂传递模塑(RTM,Resin Transfer Molding)成型工艺;250 ℃固化后的介电常数为2.75,介质损耗角正切0.007(10 GHz),玻璃化转变温度299 ℃,弯曲强度174 MPa,模量3.2 GPa,综合性能优异.     

非均匀气动加热下隔热层结构的优化设计

为获得非均匀气动加热条件下高超声速飞行器不同部位的合适的热防护系统厚度,发展了一种基于网格变形技术（ASD）的隔热层结构优化方法。以高超声速飞行器的复合材料隔热层结构为研究对象,采用有限元法在局部均布热流载荷、三角形均变热流载荷和二次函数热流载荷等作用条件下建立隔热层结构的热固耦合分析模型,提出了基于ASD技术与热固耦合分析相结合的结构轻量化设计方法。结果表明,基于网格变形技术能够快速有效地解决优化过程中的网格自动更新问题,并得到了光滑柔顺的厚度形状曲线,优化后更充分发挥了隔热层结构各层材料的承载能力。     

源表法检定标准电阻

介绍了源表法检定全套标准电阻的工作原理、方法及不确定度分析,并对此方法进行了验证。     

硅化物涂层电子束重熔表面改性技术

在Nb521铌合金表面采用料浆烧结法制备硅化物涂层,利用高频扫描电子束对硅化物涂层进行重熔处理,通过扫描电子显微镜对处理样品表面形貌进行组织结构分析。研究表明,经过电子束重熔处理,硅化物涂层表面陶瓷晶粒粒度降低,表面粗糙度降低,陶瓷颗粒之间烧结作用增强,重熔区域与未处理区域具有明显的边界,电子束能量分布较均匀,电子束重熔提高了硅化物涂层的抗氧化性能和抗热震性能。     

Ti对Nb基合金高温抗氧化性能的影响

氧化物的体积与形成该氧化物消耗的金属的体积之比(PBR,Pilliing-Bed-worth Ratio),是判断氧化膜完整性的一个重要判据,是氧化膜内产生生长应力的主要因素之一.基于合金氧化行为建立了一个简化的氧化模型,给出计算合金单一氧化膜PBR的计算式,估算了Nb2O5,Ti2Nb10O29,TiNb2O7,TiO2的PBR.研究表明:在Nb基合金中加入合金化元素Ti,合金的高温抗氧化性能得到改善.实验表明:随着Ti含量的增加,合金氧化膜中氧化产物的种类和含量发生变化,致使氧化膜的PBR发生改变.随着Ti含量的增加,氧化膜的PBR值逐渐减小,致使氧化膜的完整性提高.