星箭锁紧装置黏滞摩擦系数的影响因素研究

星箭锁紧装置是卫星与火箭连接的关键机构。装置中的V形卡块在预紧力施加过程中,易发生偏斜,使得星箭分离配合面接触不均匀,产生应力集中,导致星箭分离面黏着磨损。研究了星箭锁紧装置中的V形卡块和上下端框的铝合金摩擦副在不同影响因素下摩擦系数的变化,探究了温度、正压力以及铝合金表面粗糙度对界面黏着和黏滞摩擦系数的影响。研究结果表明,硫酸阳极化处理的2A14T6-2A14T6比较适合作为摩擦副材料,在加工和锁紧过程中,应合理控制其粗糙度、温度和正压力,以避免黏着磨损。     

一种新型导弹级间分离机构研究

文章简要阐述了一种新型的导弹级间分离机构的工作原理及特点 ,该级间分离机构对于弹径较小 ,分离质量不大的导弹级间分离有较好的应用前景。     

空天机复合循环推进技术新概念研究——液化空气循环在其中的应用

研究了空天机复合循环推进技术中的一个新概念——以液化空气循环为基础的SERJ组合发动机性能。计算了空气液化后分离为液氧和液氮后组合发动机在不同高度、不同飞行马赫数下的性能曲线,并考虑了液化空气量对组合发动机性能的影响。对计算结果的分析表明,液化空气循环虽然使组合发动机推力下降,但能使比冲有较大幅度的上升;液化空气量过大与过小均不利于进一步提高比冲性能,而是存在一个最佳值。     

Analytical solution methods for eigenbuckling of symmetric cross-ply composite laminates

Based on the first-order shear deformation theory, this paper explores the analytical methods for eigenbuckling of symmetric cross-ply rectangular composite laminates with a pair of parallel edges simply supported and the remaining two edges arbitrarily constrained. The main con-tribution of present paper lies in two aspects: one is to present a simple and effective analytical method, namely, the separation-of-variables method, which can generate the closed-form buckling solutions without any computational difficulty;the other is to incorporate the accurate computation method of exponential matrix into the state space technique to avoid the inevitable numerically ill-conditioned problems reported in several literatures. The results obtained via both analytical meth-ods are identical, and a good agreement with their counterparts in literature is observed. The separation-of-variables method can generate exact solutions within 1 s, which is impossible if the state space method is employed. Besides, the combination of the accurate computation method of exponential matrix and the state space method greatly improves the computational efficiency and gives correct results compared with the straightforward use of state space method.     

基于交叉验证的捷联惯导制导工具误差分离方法

在捷联惯导制导工具误差分离过程中引入交叉验证检验制导工具误差分离精度,并基于均方误差准则建立量化检验指标.首先建立简化的制导工具误差分离模型,并将数据划分成训练集和检验集;然后利用训练集进行制导工具误差分离;最后利用检验集和量化检验指标对分离效果进行检验.数学仿真表明,提出的误差分离模型正确可靠,精度较高,交叉验证能够对分离效果进行有效检验.     

Secondary instability of separated shear layers

The process through which a laminar flow undergoes transition to turbulence is of great fundamental and practical interest. Such a process is hugely complex as there are many diverse routes for a laminar flow to become turbulent flow. The transition process is usually initiated by flow instabilities—a primary instability stage followed by a secondary instability stage. This forms a rational framework for the early stage of a transition process and it is crucially important to understand the physics of instabilities leading to turbulence. This article reviews the results of studies on secondary instability of separated shear layers in separation bubbles and summaries the current status of our understanding in this area.     

Using S-band dual polarized radar for convective/stratiform rain indexing and the correspondence with AMSR-E GSFC profiling algorithm

The separation of rain types in convective and stratiform regimes has long been a goal in microwave remote sensing of precipitation research. In this essence, a dual polarized radar based indexing scheme that provides information on convective and stratiform (C/S) rain regimes has been presented in correspondence with advanced microwave scanning radiometer – earth observing system (AMSR-E) GSFC profiling algorithm estimate of convective rain percentage. The dual polarized radar based C/S indexing scheme first retrieves the normalized gamma drop size distribution parameters, median volume drop diameter (D₀) and concentration parameter (N_w), from dual polarized radar measurements Z_H and Z_DR, representing reflectivity and differential reflectivity respectively, by means of the genetic programming approach. Next, the C/S rain index is calculated based on the formulation of an empirical relation in N_w–D₀ domain. The scheme has been inspected and applied on measurements from the S-band Chilbolton dual polarized radar. A considerable number of “coincident” cases from the radar and the AMSR-E observations are investigated. It has been revealed that the dual polarized radar based C/S rain indexing is in a similar pattern with the AMSR-E GSFC profiling algorithm estimate of convective rain percentage. Generally, as C/S rain index value increases, which signifies a stratiform to convective trend, the AMSR-E convective rain percentage also increases.     

微通道内低马赫数气体的流动与换热特性理论研究

微通道换热器由于换热系数高、质量小等优点,在微电子系统与航空航天等领域具有极大的应用价值,但截至目前人们对微通道内流体的流动与换热特性仍知之甚少.本文针对平行平板式微通道,在连续介质区、低马赫数以及粘性热可忽略的情形下,采用分离变量法导出并简化了均匀热流边界条件下变物性气体的二维层流流动与换热过程的控制方程,进而计算得...     

地地战术导弹子母弹抛射与散布建模仿真

基于对子弹的抛射和末端弹道的物理过程建模进行了仿真计算,研究了各层子弹抛射速度、抛射延时给子弹分布带来的影响。结果表明,通过适当调整母弹弹道、抛射延时等参数,可以有效提高子母弹的覆盖面积。     

柔性特征的太阳电池翼在轨载荷分析

建立太阳电池翼地面模态试验修正后的较为精确的动力学模型,以此作为太阳电池翼的柔性特征提出基于混合坐标法的太阳电池翼在轨载荷分析方法,计算了航天器在轨机动、舱段分离、交会对接等典型工况下太阳电池翼的载荷变化情况,分析了不同工况下载荷与太阳电池翼动力学性能的相互关系,提出太阳电池翼为应对不同飞行工况应处于何种转角状态的结构设计建议。最后依据最大载荷工况开展了相关试验验证,试验结果表明本文的研究方法有效合理,可推广应用于其它型号太阳电池翼的在轨载荷设计。