TDICCD在航天遥感器中的应用

文中介绍TDICCD的优点,重点阐述TDICCD在航天遥感器应用需要考虑的主要技术问题及国外发展概况。     

一种热释电红外传感器控制芯片的设计

阐述了一种采用0.6μm CMOS工艺的热释电红外传感器控制芯片的设计。该芯片在[4.0 V,6.0V]电源范围内稳定工作,具有较高的电源电压抑制比和较低的温漂,并且作了抗噪声和抗交流电源干扰处理。这种控制芯片用于接收、放大、处理、控制热释电红外传感器信号,应用前景广阔。     

外差干涉型光纤应变传感技术的研究

研究了一种采用高双折射纤模间干涉的应变传感器。传感器利用注入结电流直接调频的半导体激光（ＬＤ）产生外差干涉，从而实现了干涉相位的线性检测。实验结果显示干涉相位的分辨力为一个干涉条纹的２．５％，其相应的光纤应变是３６×１０－６ｍ。     

红外地平仪姿态测量误差模型

分析得出地球扁率和红外辐射是扫描式红外地平仪测量误差的主要原因。针对地球扁率，基于方位角的确定，分别给出了滚动角和俯仰角的测量误差模型。在地球红外辐射方面，给出了确定地平仪扫人、扫出点位置的方法，进而给出地球红外辐射误差的计算方法。最后，通过算例，给出了有关仿真结果，对方法的有效性进行了验证。     

光纤光栅温度传感器研究进展

归纳了以光纤光栅为基础的温度传感器的研究现状,总结了这些温度传感器的基本原理,再现了它们的主要结构,展示了原文提到的实验过程和数据分析结果,并对这些传感器的优点和不足进行了分析,提出了部分改进方案。通过研究发现：光纤光栅温度传感器具有优良的特性,能够在恶劣环境下测量极高的温度,具有广阔的应用前景。     

基于双量程推力传感器的精确测力技术

针对双量程推力传感器在使用中测试精度低的问题,结合传感器固有特性,开展了传感器动态特性分析及误差补偿方法的研究。通过有限元分析和力锤冲击试验,结合结构分析获得了双量程力传感器等效二自由度和三自由度动力学模型。利用近似求积数值法对冲击力试验输出信号进行补偿,获得了接近标准信号的测试结果,对该补偿方法进行了有效性验证。结果显示:本方法对发动机试验的推力信号进行了补偿,推动了单室双推力发动机推力的精确测量,为双推力发动机的推力测试提供了有效途径。     

A direct position determination method with combined TDOA and FDOA based on particle filter

The localization of a stationary transmitter using moving receivers is considered. The original Direct Position Determination (DPD) methods, with combined Time Difference of Arrival (TDOA) and Frequency Difference of Arrival (FDOA), do not perform well under low Signal-to-Noise Ratio (SNR), and worse still, the computation cost is difficult to accept when the computational capabilities are limited. To get better positioning performance, we present a new DPD algorithm that proves to be more computationally efficient and more precise for weak signals than the conventional approach. The algorithm partitions the signal received with the same receiver into multiple non-overlapping short-time signal segments, and then uses the TDOA, the FDOA and the coherency among the short-time signals to locate the target. The fast maximum likelihood estimation, one iterative method based on particle filter, is designed to solve the problem of high computation load. A secondary but important result is a derivation of closed-form expressions of the Cramer-Rao Lower Bound (CRLB). The simulation results show that the algorithm proposed in this paper outperforms the traditional DPD algorithms with more accurate results and higher computational efficiency, and especially at low SNR, it is more close to the CRLB.     

去中心化时差频差直接定位方法

针对原始利用时差频差的直接定位(DPD)方法存在数据传输量和计算量大的瓶颈,提出了两种去中心化直接定位方法。第1种方法采用去中心化配对方案,只将各观测站截获信号在站间进行一次传输,将数据传输和计算分散到各观测站间并行计算互模糊函数(CAF),构造仅满足满秩条件的互模糊矩阵(CAM)。第2种方法根据推导的任意互模糊函数间关系公式,采用归约方式去中心化的在各观测站并行计算余下互模糊函数,补全互模糊矩阵。两种方法都降低了直接定位数据传输量,提高了计算效率。性能分析和仿真实验表明本文两种方法精度性能优于两步定位方法,在低信噪比时两种方法都可达到比较理想的精度性能,在高信噪比时第2种方法与原始直接定位方法的精度性能相当。     

Relative position and attitude estimation of spacecrafts based on dual quaternion for rendezvous and docking

The capacity to acquire the relative position and attitude information between the chaser and the target satellites in real time is one of the necessary prerequisites for the successful implementation of autonomous rendezvous and docking. This paper addresses a vision based relative position and attitude estimation algorithm for the final phase of spacecraft rendezvous and docking. By assuming that the images of feature points on the target satellite lie within the convex regions, the estimation of the relative position and attitude is converted into solving a convex optimization problem in which the dual quaternion method is employed to represent the rotational and translational transformation between the chaser body frame and the target body frame. Due to the point-to-region correspondence instead of the point-to-point correspondence is used, the proposed estimation algorithm shows good performance in robustness which is verified through computer simulations.