可重复使用运载器磁悬浮助推发射参数研究

针对磁悬浮助推水平起飞运载器这种新型发射概念,采用概念性分析方法,研究地面发射参数对可重复使用运载器性能的影响规律。结果表明,助推发射水平起飞运载器在降低初始推重比、推进剂和结构质量等方面具有优势,最后得出地面发射参数的一组优化值。     

航班调度应急管理研究

航班调度应急管理是针对频发、突发事件的管理方法,它以提高顾客利益与航空公司利益的综合效应为目标,涵盖了制定航班计划到执行计划的整个过程.本文就航班调度应急管理的两种方法：鲁棒调度与受扰恢复策略,论述了两者的研究重点、数学模型和算法.     

Deep Impact: Working Properties for the Target Nucleus – Comet 9P/Tempel 1

In 1998, Comet 9P/Tempel 1 was chosen as the target of the Deep Impact mission (A’Hearn, M. F., Belton, M. J. S., and Delamere, A., Space Sci. Rev., 2005) even though very little was known about its physical properties. Efforts were immediately begun to improve this situation by the Deep Impact Science Team leading to the founding of a worldwide observing campaign (Meech et al., Space Sci. Rev., 2005a). This campaign has already produced a great deal of information on the global properties of the comet’s nucleus (summarized in Table I) that is vital to the planning and the assessment of the chances of success at the impact and encounter. Since the mission was begun the successful encounters of the Deep Space 1 spacecraft at Comet 19P/Borrelly and the Stardust spacecraft at Comet 81P/Wild 2 have occurred yielding new information on the state of the nuclei of these two comets. This information, together with earlier results on the nucleus of comet 1P/Halley from the European Space Agency’s Giotto, the Soviet Vega mission, and various ground-based observational and theoretical studies, is used as a basis for conjectures on the morphological, geological, mechanical, and compositional properties of the surface and subsurface that Deep Impact may find at 9P/Tempel 1. We adopt the following working values (circa December 2004) for the nucleus parameters of prime importance to Deep Impact as follows: mean effective radius = 3.25± 0.2 km, shape – irregular triaxial ellipsoid with a/b = 3.2± 0.4 and overall dimensions of ∼14.4 × 4.4 × 4.4 km, principal axis rotation with period = 41.85± 0.1 hr, pole directions (RA, Dec, J2000) = 46± 10, 73± 10 deg (Pole 1) or 287± 14, 16.5± 10 deg (Pole 2) (the two poles are photometrically, but not geometrically, equivalent), Kron-Cousins (V-R) color = 0.56± 0.02, V-band geometric albedo = 0.04± 0.01, R-band geometric albedo = 0.05± 0.01, R-band H(1,1,0) = 14.441± 0.067, and mass ∼7×10¹³ kg assuming a bulk density of 500 kg m⁻³. As these are working values, {i.e.}, based on preliminary analyses, it is expected that adjustments to their values may be made before encounter as improved estimates become available through further analysis of the large database being made available by the Deep Impact observing campaign. Given the parameters listed above the impact will occur in an environment where the local gravity is estimated at 0.027–0.04 cm s⁻² and the escape velocity between 1.4 and 2 m s⁻¹. For both of the rotation poles found here, the Deep Impact spacecraft on approach to encounter will find the rotation axis close to the plane of the sky (aspect angles 82.2 and 69.7 deg. for pole 1 and 2, respectively). However, until the rotation period estimate is substantially improved, it will remain uncertain whether the impactor will collide with the broadside or the ends of the nucleus.     

航天飞机三维最优再入轨道及气动加热过程

本文应用现代控制理论研究了航天飞行器三维最优再入轨道和与轨道参数密切相关的气动加热过程。文中选择飞行器迎角和倾斜角作为控制变量,以飞行器气动加热率和飞行过载沿轨道积分最小作为优化性能指标,按极大原理导出最优再入轨道有约束控制的非线性两点边值问题。采用了数值优化方法——共轭梯度法求解有升力飞行器的最优再入轨道及其热过程。文中以允许误差法讨论了权系数和罚函数的选取方法;对不同速度范围研究了不同的加热模型;按热平衡方程与优化轨道同步迭代的方法求得了算例数值结果。算例的数值结果与文献[13]的量值是一致的。     

加工时间依赖工件位置的单机成组排序问题

排序问题是一类重要的组合优化问题,现代排序问题突破了经典排序问题的种种假设,有着越来越广阔的应用前景。对加工时间依赖于工件位置的单机成组排序问题进行了研究,讨论了成组技术中,要求同一组内工件必须连续加工,加工时间的函数变量是工件所在的加工位置,目标函数分别为极小化最大完工时间与总完工时间。分别给出其多项式时间的最优算法。     

航天飞行中的稀薄气体动力学

飞船、宇航探测器、航天飞机等复杂外形航天器给气体动力学，包括稀薄气体动力学提出了新的要求。本文简要介绍了为计算过渡领域中气动力与热而发展的基于位置元概念的DSMC方法的通用算法。该方法解决了计算物面通量量的技术难点并已用于模拟圆球、飞船、类航天飞机的绕流。正在进行的航天实践，如麦哲伦飞船对金星的探测、行星大气中的气动制动、伽利略飞船的木星之行、尾屏蔽在太空中获得高真空的实验等等提出了新的气动力问题，稀薄气体动力学和DSMC方法是有力的工具。     

航天飞机防热瓦缝隙气动加热的讨论

本文根据航天飞机防热瓦缝隙流动的特点,从二维定常不可压缩层流的 N-S方程出发,提出了一个简化流动模型,即缝隙的二维流动可近似当作两个准一维沟槽流动的线性迭加,由此给出了缝隙中的热流率与压力、压力梯度和缝隙宽度的变化规律,并利用现有的实验结果作了验证。     

形态图计算中的投影空间维数和投影空间模型

确定投影空间维数和建立投影空间模型是计算机视觉领域中形态图计算时一个十分重要的基本问题，本文根据态图计算时特征视图拓扑结构等价的特点，指出轴测投影下的投影空间是二维空间，透视投影空间为三维空间，并分别了投影空间模型的建立方法，从而使复杂物体形科计算是简单可行。     

Banach空间中微分包含解的存在性

本文在无穷维Ｂａｎａｃｈ空产是中讨论微分包含解的存在性，先给出了几个普通微分包含的比较定理，讨论了近似解与解的关系，然后得到了Ｂａｎａｃｈ空间中微分包含解的存在性定理。     

一种微波等离子体原子氧模拟装置

介绍了一种新颖的原子氧模拟试验装置。该装置采用了微波电子回旋共振（ｅｌｅｃｔｒｏｎｃｙｃｌｏｔｒｏｎｒｅｓｏｎａｎｃｅ简称“ＥＣＲ”）的先进技术。最佳调试状态下，可获得１０（１５）／（ｃｍ２·ｓ）的束流。在该试验装置上，对航天器上常用的Ｋａｐｔｏｎ和石墨环氧材料进行了原子氧效应试验，首次在国内成功的获得了原子氧束流模拟试验的样品结果。对样品的表面形貌分析证明：试验结果完全与国外同类设备的试验结论一致，这标志着中国在原子氧地面模拟技术领域的研究已取得重要进展。