经营多角化的结合效应与度量

经营多角化多年来一直是产业经济学家和政策制定者关注的焦点之一。本文对如何取得多角化经营的结合效应作了分析,并给出了经营多角化的度量方法。     

民机高速风洞试验的阻力雷诺数效应修正

在飞机设计阶段,获得准确的气动特性数据对设计者是十分重要的,采用缩比模型的风洞试验是主要途径之一。但是风洞条件限制了试验的Re数,从而影响了对跨音速巡航阻力的评估,因此需要对风洞试验结果的阻力进行Re数效应修正。分析了风洞试验结果阻力的误差构成,提出了Re数效应修正的风洞试验数据基础;进一步就跨音速巡航阻力的构成进行分析,论述了对最小阻力和升致阻力分项修正的方法,并对修正结果进行了验证,得到了一种可靠的工程方法。     

资源卫星数据收集系统及其应用

简要说明了资源卫星数据收集系统(DCS)的原理、组成和特点,在对分布范围广、参数缓变和传输速率低的数据进行采集方面,资源卫星DCS具有很大的优势和很高的利用价值。结合环保监测应用的需求,对资源卫星DCS应用系统方案进行了详细设计。     

公共设施投资的决策模型探讨

公共设施投资的成本与产生的社会福利如何比较，社会效益的提高有多大等等一系列基本问题为政府所关心。这一问题的解决需要通过结合公共经济学的原理与近几年出现的一些新观点做出系统的可行性分析模型加以解决。本文就是基于公共经济学的理论并结合了笔者的一些新的观点所作的常识性的探索。     

进场着陆飞行品质的地面试验研究

针对电传控制增稳飞机进行了进场着陆的飞行品质地面模拟试验研究，验证了适合于进场着陆的控制律，并得出一些重要的有关进场着陆的驾驶员评定意见。此外，还计算了轨迹角超调值，验证了该参数数可以作为一个重要的飞行品质准则。     

Ground experiments of Chang’e-5 lunar regolith penetrating radar

The Lunar Regolith Penetrating Radar (LRPR) is an Ultra-Wideband (UWB) array-based Ground penetrating radar (GPR) onboard the lander of Chang’e-5 (CE-5) mission. The primary scientific objectives of the LRPR are to probe the thickness and structure of lunar regolith of the landing site, and support the drilling and sampling process. In order to evaluate the performance of the LRPR, a series of ground experiments are performed using the LRPR prototype mounted on a CE-5 lander model. The performance of the LRPR is evaluated by comparing the experimental data with the simulated data. Data processing and imaging method are verified, and the interferences from the lander and other aspects are analyzed. The results of the ground experiments and simulation demonstrate that the LRPR is able to meet the design requirement of 2-m detection depth. They also indicate that the upper and lower interfaces of the stratified structure in the lunar regolith can be well distinguished by the LRPR when the dielectric constant difference is greater than 0.3, and the imaging effect of the location under the dense antennas is better than that of other positions. However, the identification capability of the LRPR to the independent blocky objects is relatively poor mainly due to the clutters caused by the lander, the sparsity of the antenna elements compared to the size of the basalt block, the limited aperture of the antenna array, and the tail of the transmitted waveform.     

Neural adaptive control for a ground experiment of the space proximity operation in a six-degree-of-freedom micro-gravity simulation system

In this study, a neural adaptive controller is developed for a ground experiment with a spacecraft proximity operation. As the water resistance in the experiment is highly nonlinear and can significantly affect the fidelity of the ground experiment, the water resistance must be estimated accurately and compensated using an active force online. For this problem, a novel control algorithm combined with Chebyshev Neural Networks (CNN) and an Active Disturbance Rejection Control (ADRC) is proposed. Specifically, the CNN algorithm is used to estimate the water resistance. The advantage of the CNN estimation is that the coefficients of the approximation can be adaptively changed to minimize the estimation error. Combined with the ADRC algorithm, the total disturbance is compensated in the experiment to improve the fidelity. The dynamic model of the spacecraft proximity maneuver in the experiment is established. The ground experiment of the proximity maneuver that considers an obstacle is provided to verify the efficiency of the proposed controller. The results demonstrate that the proposed method outperforms the pure ADRC method and can achieve close-to-real-time performance for the spacecraft proximity maneuver.     

Feasibility evaluation of failure models for predicting forming limit of metal foils

Forming limit of metal foil is an important index to evaluate its formability, and is of considerable significance to improve the quality of products. The ductile fracture (DF) behavior in microscale plastic deformation is remarkably affected by the geometry and grain size. To explore the size-dependent forming limit curve (FLC), the Holmberg and Marciniak tests of SUS304 foils with the thicknesses of less than 0.1 mm and diverse grain sizes were performed. In addition, the validity and feasibility of three types of existing failure models including Swift/Hill, Marciniak-Kuczynski (M-K) and DF criteria for predicting the micro-scaled FLCs were discussed. It is found that the Swift/Hill model possesses the worst accuracy with predicting deviation above 50%. Four classical DF criteria including Freudenthal, Ayada, Brozzo and Oh show great difference, and Oh model considering plastic anisotropy presents the best precision. The predicted deviation of M-K model is aggravated with increasing grain size and decreasing foil thickness, which is attributed to the intensified free surface roughening and transformation of fracture mechanism with miniaturization. This research thus provides a deeper understanding and valuable reference for the widespread application of FLC in microforming.     

卫星通信地球站站址勘测的研究

介绍了卫星通信地球站站址勘测技术要求;讨论了方位角与俯仰角计算,微波干扰电平允许值计算,微波干扰测试以及发射协调距离的估算;从而得出建站最必要的技术结论。     

C 波段全场效应晶体管化宽带微波接收机

介绍一个全场效应晶体管化 C 波段卫星转发器用微波接收机的方案,并给出微波通道部分的实验结果,其中采用元器件均以国内1986年生产,现空间仍在用的高可靠性器件为设计依据和实验样管。实验结果与法国汤姆逊公司1986年为我国研制生产的 C 波段接收机(以下简称法国接收机)相比,电气指标均能达到该公司产品水平,同时具有结构简单、体积小、低功耗等优点。该方案同样适于 Ku波段应用。