栅格翼展开等效试验方法研究

为了在运载器真实飞行前对栅格翼展开过程和系统力学性能进行考核,针对现有模拟试验方法不能有效模拟飞行工况栅格翼在气动力作用下展开过程及该过程对壳体和栅格翼的冲击的问题提出了一种等效试验方法,试验结果表明具有很好的可行性和有效性,为后续类似试验提供了有益的参考。     

DESIGN OBJECT MODEL AND DESIGN PROCESS MODEL OF COMPUTER AIDED AIRCRAFT CONCEPTUAL DESIGN SYSTEM

ＤＥＳＩＧＮＯＢＪＥＣＴＭＯＤＥＬＡＮＤＤＥＳＩＧＮＰＲＯＣＥＳＳＭＯＤＥＬＯＦＣＯＭＰＵＴＥＲＡＩＤＥＤＡＩＲＣＲＡＦＴＣＯＮＣＥＰＴＵＡＬＤＥＳＩＧＮＳＹＳＴＥＭＳｈｅｎＺｈａｎｇ（ＡｉｒｃｒａｆｔＣＡＤＲｅｓｅａｒｃｈＣｅｎｔｅｒ，Ｂｅｉｊｉｎ...     

电阻点焊质量评判初探

在大量实验数据基础上，利用回归分析法构造了基于热量和电极压力的电阻点焊质量评判数学模型。在点焊过程参数变化情况下，用该数学模型，能有效地对焊点质量进行初级评判。     

Accurately predicting hypersonic transitional flow on cone via a symmetry approach

A new algebraic transition model is proposed based on a Structural Ensemble Dynamics (SED) theory of wall turbulence, for accurately predicting the hypersonic flow heat transfer on cone. The model defines the eddy viscosity in terms of a two-dimensional multi-regime distribution of a Stress Length (SL) function, and hence is named as SED-SL. This paper presents clear evidence of precise predictions of transition onset location and peak heat flux of a wide range of hypersonic Transitional Boundary Layers (TrBL) around straight cone at zero incidence, to an unprecedented accuracy as validated by over 70 measurements for varying five crucial influential factors (Mach number, temperature ratio, cone half angle, nose Reynolds number and noise level). The results demonstrate the universality of the postulated multi-regime similarity structure, in characterizing not only the spatial non-uniform distribution of the eddy viscosity in hypersonic TrBL on cone, but also the dependence of the transition onset location on the five influential factors. The latter yields a novel correlation formula for transition center Reynolds number which takes similar functional form as the SL function within the symmetry approach. It is concluded that the SED-SL model simulates TrBL around cone with uniformly high accuracy, and then points out to an optimistic alternative way to construct hypersonic transition model.     

Error modeling and compensating of a novel 6-DOF aeroengine rotor docking equipment

In the docking process of aeroengine rotor parts, docking accuracy that indicates the gaps between the end faces is strictly required. A key issue is improving docking accuracy using automated docking equipment. In this paper, a systematic study is carried out on the error modeling and compensation of a novel six-degrees-of-freedom(6-DOF) docking equipment for aeroengine rotors. First, a new model for indicating the main indexes of docking accuracy is proposed. Then, the error model of a special...     

Where is the base of the Transition Region? Evidence from TRACE,SDO, IRIS and ALMA observations

Classic solar atmospheric models put the Chromosphere-Corona Transition Region (CCTR) at $～2$ Mm above the ${\tau }_{5000}=1$ level, whereas radiative MHD (rMHD) models place the CCTR in a wider range of heights. However, observational verification is scarce. In this work we review and discuss recent results from various instruments and spectral domains. In SDO and TRACE images spicules appear in emission in the 1600, 1700 and 304 Å bands and in absorption in the EUV bands; the latter is due to photo-ionization of H i and He i, which increases with wavelength. At the shortest available AIA wavelength and taking into account that the photospheric limb is $～0.34$ Mm above the ${\tau }_{5000}=1$ level, we found that CCTR emission starts at $～3.7$ Mm; extrapolating to $\lambda =0$, where there is no chromospheric absorption, we deduced a height of $3.0\pm 0.5$ Mm, which is above the value of 2.14 Mm of the Avrett and Loeser model. Another indicator of the extent of the chromosphere is the height of the network structures. Height differences produce a limbward shift of features with respect to the position of their counterparts in magnetograms. Using this approach, we measured heights of $0.14\pm 0.04$ Mm (at 1700 Å), $0.31\pm 0.09$ Mm (at 1600 Å) and $3.31\pm 0.18$ Mm (at 304 Å) for the center of the solar disk. A previously reported possible solar cycle variation is not confirmed. A third indicator is the position of the limb in the UV, where IRIS observations of the Mg ii triplet lines show that they extend up to $～2.1$ Mm above the 2832 Å limb, while AIA/SDO images give a limb height of $1.4\pm 0.2$ Mm (1600 Å) and $5.7\pm 0.2$ Mm (304 Å). Finally, ALMA mm-$\lambda$ full-disk images provide useful diagnostics, though not very accurate, due to their relatively low resolution; values of $2.4\pm 0.7$ Mm at 1.26 mm and $4.2\pm 2.5$ Mm at 3 mm were obtained. Putting everything together, we conclude that the average chromosphere extends higher than homogeneous models predict, but within the range of rMHD models..     

Hot deformation behavior and strain compensation constitutive model of equiaxed fine grain diffusion-welded micro-duplex TC4 titanium alloy

In this work, two-stage diffusion bonding of micro-duplex TC4 titanium alloy was carried out to study the flow behavior and constitutive models of the bonding joint and the base metal after the same thermal cycling during the hot forming process. Microstructure and mechanical properties test were used to verify the good quality of the equiaxed fine grain diffusion-welded TC4 alloy. Quasi-static tensile experiment was carried out at temperatures ranging from 750–900 °C and strain rates of 0.0001–0.1 s⁻¹. The joint showed the weak dynamic recovery at strain rates of 0.01–0.1 s⁻¹ and temperatures of 750–850 °C. At strain rates of 0.0001–0.001 s⁻¹ and temperatures of 850–900 °C, the flow stress of joint presented steady-state characteristics. Different deformation conditions lead to the remarkable difference of dynamic softening performance between the joint and heat-treated base metal, but the flow stress in elastic and strain hardening stages exhibited similar behavior. The strain compensated Arrhenius-type constitutive models of TC4 joint and heat-treated base metal were developed respectively. The fifth-order polynomial functions between the material property correlation coefficients and strain were obtained. The models have shown good correlation, with correlation coefficient values of 0.984 and 0.99. The percentage average absolute relative error for the models were found to be 10% and 9.46%, respectively.     

基于虚拟圆球模型的格网SINS/GNSS极区组合导航方法

由于地球椭球模型下格网系惯性导航系统力学编排复杂,因此,在推导格网系惯性导航误差方程时使用地球圆球模型来简化计算.针对此问题,提出了基于地球虚拟圆球模型下的格网系惯性导航力学编排,并在此基础上推导了格网系误差方程,设计了基于虚拟圆球模型下的格网系捷联惯性导航系统(SINS)与全球卫星导航系统(GNSS)的组合导航系统,实现了组合导航系统模型统一化.将中、低纬度跑车实验数据通过虚拟极区方法转换为极区实验数据,实验结果表明:稳定后姿态误差低于0.3',速度误差低于0.1m/s,位置误差低于5m,可以满足极区航行的导航精度要求.     

Comparative evaluation of five global gravity models over a part of the Bay of Bengal

Several global gravity models (GGMs) are freely available in the public domain, which can be utilised to study the earth's gravity field in almost every part of the globe. The present study compared the free-air gravity anomalies calculated from the five GGMs EGM2008, EIGEN6C4, GECO, XGM2019e_2159, and SGG-UGM-2 archived by the International Centre for Global Earth Models (ICGEM) with respect to shipborne gravity in the Bay of Bengal. The average correlation coefficient and covariance are ～ 96 % and ～ 450mGal². The mean difference between the shipborne and the modelled gravity is ? 5 mGal. Relatively higher amplitude gravity differences observed at the continental-oceanic transition, the 85°E and Ninetyeast ridges, and the western basin are possibly due to high gradient, dominant density contrasts, and rugged topography. The average standard deviation and root-mean-square-error (RMSE) of the differences are ～ 6.5 mGal and ～ 7.5 mGal. A significantly lower standard deviation and RMSE found for the models generated at higher degree/order compared to lower degree/order is due to diminishing omission error of the GGMs with increasing degrees of truncation. The spectral analysis and coherence estimation of the modelled gravity demonstrate excellent correspondence for anomalies wider than ～ 25 km. The agreement between anomaly amplitudes and shapes and calculated statistics indicates that the accuracy and resolution of the modelled gravity data are certainly good enough for regional-scale studies aiming to map Moho topography and mantle structures. However, the delineation of shorter wavelength features originating from the shallow-level basement/sedimentary might be uncertain and requires further validations. The present study confirms that all five models show promising results in terms of their accuracy and resolution. Moreover, the SGG-UGM-2 and XGM2019e_2159 models compare favourably with respect to the GECO, EIGEN6C4 and EGM2008 models in the Bay of Bengal.     

Quick identification of guidance law for an incoming missile using multiple-model mechanism

A guidance law parameter identification model based on Gated Recurrent Unit (GRU) neural network is established. The scenario of the model is that an incoming missile (called missile) attacks a target aircraft (called aircraft) using Proportional Navigation (PN) guidance law. The parameter identification is viewed as a regression problem in this paper rather than a classification problem, which means the assumption that the parameter is in a finite set of possible results is discarded. To increase the training speed of the neural network and obtain the nonlinear mapping relationship between kinematic information and the guidance law parameter of the incoming missile, an output processing method called Multiple-Model Mechanism (MMM) is proposed. Compared with a conventional GRU neural network, the model established in this paper can deal with data of any length through an encoding layer in front of the input layer. The effectiveness of the proposed Multiple-Model Mechanism and the performance of the guidance law parameter identification model are demonstrated using numerical simulation.