Particle simulation of grid system for krypton ion thrusters

The transport processes of plasmas in grid systems of krypton (Kr) ion thrusters at different acceleration voltages were simulated with a 3D-PIC model, and the result was compared with xenon (Xe) ion thrusters. The variation of the screen grid transparency, the accelerator grid current ratio and the divergence loss were explored. It is found that the screen grid transparency increases with the acceleration voltage and decreases with the beam current, while the accelerator grid current ratio and divergence loss decrease first and then increase with the beam current. This result is the same with Xe ion thrusters. Simulation results also show that Kr ion thrusters have more advantages than Xe ion thrusters, such as higher screen grid transparency, smaller accelerator grid current ratio, larger cut-off current threshold, and better divergence loss characteristic. These advantages mean that Kr ion thrusters have the ability of operating in a wide range of current. Through comprehensive analyses, it can be concluded that using Kr as propellant is very suitable for a multi-mode ion thruster design.     

Numerical study on flow fields and aerodynamics of tilt rotor aircraft in conversion mode based on embedded grid and actuator model

A method combining rotor actuator disk model and embedded grid technique is presented in this paper, aimed at predicting the flow fields and aerodynamic characteristics of tilt rotor aircraft in conversion mode more efficiently and effectively. In this method, rotor's influence is considered in terms of the momentum it impacts to the fluid around it; transformation matrixes among different coordinate systems are deduced to extend actuator method's utility to conversion mode flow fields' calculation. Meanwhile, an embedded grid system is designed, in which grids generated around fuselage and actuator disk are regarded as background grid and minor grid respectively, and a new method is presented for ‘donor searching' and ‘hole cutting' during grid assembling. Based on the above methods, flow fields of tilt rotor aircraft in conversion mode are simulated, with threedimensional Navier–Stokes equations discretized by a second-order upwind finite-volume scheme and an implicit lower–upper symmetric Gauss–Seidel(LU-SGS) time-stepping scheme. Numerical results demonstrate that the proposed CFD method is very effective in simulating the conversion mode flow fields of tilt rotor aircraft.     

一种飞船返回舱落点选优算法的设计与实现

设计一种选优算法。算法依据概率论,以寻找落点最密集区域为思路,从已知众多飞船返回舱落点数据中计算产生一个“优秀”落点,即尽可能接近返回舱的实际着陆点。     

临近空间飞行器多物理场耦合建模的网格映射方法

临近空间飞行器的研制面临许多复杂的问题和挑战,涉及总体、气动、结构、控制、防热、动力等多个学科和专业领域的相互作用、高度耦合的子系统。全系统、全流程的仿真验证与性能评估能够为设计工作提供重要依据,缩短研制周期。而气动、结构、防热等专业的仿真建模和模型解算基于有限体积法或有限元方法,依赖于不同的工具软件,且网格的划分方法不同。本文研究了临近空间高超声速飞行器多物理场耦合建模方法,研究并实现了异构网格耦合界面之间与耦合域之间的信息传递方法,从而实现了临近空间高超声速飞行器的多物理场耦合建模与仿真。     

栅格翼电弧风洞试验的气动参数模拟方法研究

为验证栅格翼防热方案的有效性,针对栅格翼单片级试验件厚度过低无法直接测量试验件冷壁热流密度的难题,提出了一种直接模拟来流气动参数的栅格翼热防护试验设计方法,能够准确考核防热方案,对类似结构的热防护试验具有指导意义。     

高超声速栅格翼气动特性研究

阐述了用于马赫数大于5.0的高超声速飞行控制的栅格翼气动特性问题。采用工程 计算方法预示了栅格翼气动力、热特性,验证了栅格翼几何参数特性合理选取的初步要求, 这为后续深入研究进行了有益的探索。
     

基于空间变异特性的格网电离层延迟估计方法

广域增强系统采用格网模型校正用户电离层延迟误差,为保证理想的校正效果,必须精确估计格网点电离层延迟。电离层延迟的空间相关性是完成这一估计的理论依据。针对传统反距离加权法因不能准确描述这种空间相关性而使得估计效果受限的问题,依据空间统计学原理建立了电离层延迟空间变异函数模型,提出一种新的权值计算方法,并通过实际观测数据进行了仿真验证。结果表明,相比于传统方法,这一方法能明显改善格网点电离层延迟估计效果,尤其在穿透点观测数据稀疏的区域,其改善效果更为明显。     

Numerical studies of static aeroelastic effects on grid fin aerodynamic performances

The grid fin is an unconventional control surface used on missiles and rockets. Although aerodynamics of grid fin has been studied by many researchers, few considers the aeroelastic effects.In this paper, the static aeroelastic simulations are performed by the coupled viscous computational fluid dynamics with structural flexibility method in transonic and supersonic regimes. The developed coupling strategy including fluid–structure interpolation and volume mesh motion schemes is based on radial basis functions. Results are presented for a vertical and a horizontal grid fin mounted on a body. Horizontal fin results show that the deformed fin is swept backward and the axial force is increased. The deformations also induce the movement of center of pressure, causing the reduction and reversal in hinge moment for the transonic flow and the supersonic flow,respectively. For the vertical fin, the local effective incidences are increased due to the deformations so that the deformed normal force is greater than the original one. At high angles of attack, both the deformed and original normal forces experience a sudden reduction due to the interference of leeward separated vortices on the fin. Additionally, the increment in axial force is shown to correlate strongly with the increment in the square of normal force.     

双边界代数法在喷管内流场网格生成中的应用

用一种双边界代数方法生成二维网格，通过在超限插值函数中引入边界的一阶导数实现网格与边界是的正交，采用几何一致性条件保证物理区域不变形，发展一系列拉伸方程控制网格在边界或给定位置的间距。应用此方法生成了满意的喷管内流场网格，网格生成效率明显优于微分方程网格生成方法。     

网格分区构筑中区域边界的隐式处理方法

介绍一种网格分区构筑中区域边界的隐式处理方法──ADMZI法。该方法具有简单实用、数据结构灵活等特点,特别适合于区域边界难以确定的情况。将该方法应用于多级火箭级间分离时的流场物理域网格构筑,结果证明是成功的。