石墨填料对浸渗热解-熔融浸渗方法制备的C/SiC复合材料结构和性能的影响

采用石墨树脂浆料浸渍三维针刺碳毡增强体,热解后得到C/C多孔体,并采用反应熔体浸渗法制备C/SiC复合材料.研究了石墨填料对C/C多孔体的结构以及C/SiC复合材料力学性能的影响.结果 表明,石墨树脂浆料浸渍时树脂填充束间小孔形成结构致密的亚结构单元,而石墨可以有效填充胎网层等大孔隙,一次浸渍热解后碳产率有效提高.所得...     

Protecting Earth-orbiting spacecraft against micro-meteoroid/orbital debris impact damage using composite structural systems and materials: An overview

Spacecraft that are launched to operate in Earth orbit are susceptible to impacts by meteoroids and pieces of orbital debris (MMOD). The effect of a MMOD particle impact on a spacecraft depends on where the impact occurs, the size, composition, and speed of the impacting object, the function of the impacted system. In order to perform a risk analysis for a particular spacecraft under a specific mission profile, it is important to know whether or not the impacting particle (or its remnants) will exit the rear of an impacted spacecraft wall. A variety of different ballistic limit equations (BLEs) have been developed for many different types of structural wall configurations. BLEs can be used to optimize the design of spacecraft wall parameters so that the resulting configuration is able to withstand the anticipated variety of on-orbit high-speed impact scenarios. While the level of effort exerted in studying the response of metallic multi-wall systems to high speed particle impact is quite substantial, the extent of the effort to study composite material and composite structural systems under similar impact conditions has been much more limited. This paper presents an overview of the activities performed to assess the resiliency of composite structures and materials under high speed projectile impact. The activities reviewed will be those that have been aimed at increasing the level of protection afforded to spacecraft operating in the MMOD environment, and more specifically, on those activities performed to mitigate the mechanical and structural effects of an MMOD impact.     

数字化组合式大力值校准系统的研制

为了满足对大力值(20 MN左右)的测量和校准,开发了一套数字化组合式大力值校准装置。其最大量程可达24 MN,系统测量准确度为0.1%,适合于大型材料试验机的校准和检定。本文详细介绍了装置的组成结构、弹性体设计、贴片和组桥方式、数字化的方法以及与计算机的通信实现。     

利用气动式溜车—管路系统实现散状物料的输送

气动式溜车－管路系统是近年来兴起的一种高效的中，长距，离输送装置，它克服了常规运输系统运费高，噪声大和污染环境的缺点，在工程上有着良好的应用前景。本文对该系统的原理和原理和结构进行了较为细致的分析，并介绍了一个应用实例。     

复合材料层板纯剪实验

本文提出一个测量复合材料层板面内剪切性质的方板纯剪试验法。首先对方法的可靠性进行试验检验,然后对两种复合材料层板的剪切行为进行试验。     

结构比强度及其在优化设计中的应用

本文从结构重量角度推导了比强度(含比模量)表达式,分析了对同一材料不同比强度的关系,给出了比强度在结构动态分析中及结构优化设计中的应用。     

浅析俄罗斯战斗机CY—37“金雕”前掠翼三翼面气动布局的先进性

本文追溯了前掠翼的飞机的渊源。指出常规二翼面的后掠翼，变后翼和近矩耦合鸭式气动布局存在着妨碍机动进一步提高的缺点。     

ANALYSIS OF AN ELECTROSTRICTIVE STACK ACTUATOR FOR ACTIVE TRAILING EDGE FLAPS

Helicopter is a complex dynamic system withmany rotating components. The rotor blades oper-ate in a highly complex aerodynamic environment.The vibratory hub load,which is caused by cyclicvariation ofcentrifugaland aerodynamic load of therotating bladesin flight,is transmitted to the fuse-lage,resulting in serious vibration and noise of thestructure. It is one of the most important excitingsources in helicopters.There has long been a desire to reduce heli-copter vibration and to improve its per…     

Enhancing buckling capacity of a rectangular plate under uniaxial compression by utilizing an auxetic material

Auxetic materials have previously been shown to enhance various performances due to its unusual property of becoming fatter when uniaxially stretched and thinner when uniaxially com-pressed (i.e., the materials exhibit a negative Poisson’s ratio). The current study focuses on assessing the potential of an auxetic material to enhance the buckling capacity of a rectangular plate under uniaxial compression. The in-plane translational restraint along the unloaded edges that was often neglected in open literature is taken into consideration in our buckling model proposed in this study. The closed-form expressions for the critical buckling coefficient of the rectangle are provided and the predicted results agree well with those determined by the finite element method. Further-more, the results indicate that the buckling performance of a rectangular plate under uniaxial com-pression can be significantly improved by replacing the traditional material that has a positive Poisson’s ratio with an auxetic material when there is in-plane translation restraint along the unloaded edges.     

航天飞行器中舷窗温度场及换热的研究：外部界面处于第三类非线性边界条件

本文采用控制容积法,光线踪迹法结合谱带模型,研究航天飞机返回大气层时舷窗硅玻璃的非稳态复合换热。文章给出了界面S_2处于第三类非线性边界条件下,舷窗硅玻璃内部的温度场和进入机舱内部的热流密度。计算结果表明,如不考虑硅玻璃内部的辐射作用,对温度场影响不太大,但对进入机舱内的热流密度将会产生很大的误差。