硅基底上外延生长过渡金属硅化物薄膜的研究

过渡金属与硅的接触系统一直被人们所关注,是因为它们在界面处具有肖特基势垒的形成、过渡金属硅化物的外延生长、制作器件的稳定和耐高温等重要性.因此在硅基底上形成金属硅化物薄膜也被广泛应用于半导体工业.对硅衬底上蒸发的Cr、Fe、Mn薄膜进行热处理,通过固相反应法(SPR)制备过渡金属硅化物薄膜,即经过对过渡金属硅化物(薄膜)/Si系统进行各种温度、不同时间的热处理,制备出各种过渡金属硅化物薄膜.对于制成的各种硅化物薄膜,用X射线衍射法(XRD)和软X射线发射分光光谱法(SXES)对它们的组成成分进行了分析和确认.并且,由这两种分析方法表明:各种过渡金属硅化物薄膜在硅衬底上各形成了单一相的均匀层硅化物薄膜.     

高转速袋型阻尼密封泄漏的特性

采用有限元分析和计算流体动力学耦合数值分析方法(FEA/CFD),研究了考虑转子系统由于高速旋转造成转子径向伸长效应时袋型阻尼密封的泄漏特性和流场形态.计算了密封间隙为0.13mm时,袋型阻尼密封试验件在3种压比、3种转速下的泄漏量,并与试验值和不考虑转子伸长效应的CFD数值模拟结果进行了比较,验证了所采用的FEA/CFD数值方法的可靠性(误差小于1.3%)和高转速下考虑转子伸长的必要性.研究了6种压比、6种转速下密封间隙为0.25mm的袋型阻尼密封的流场和泄漏量,分析了压比和转速对袋型阻尼密封泄漏特性的影响规律.结果表明:当压比大于0.26时,随压比的减小,袋型阻尼密封泄漏量逐渐增大;当压比减小到一定值时(π<0.26),泄漏流体的马赫数在最后一个密封齿间隙处达到1.0,即发生了堵塞,此时泄漏量达到与密封进口总压相对应的最大值;在高转速下,考虑和不考虑转子半径的伸长,密封泄漏量均随转速的增大而减小;在转子面周向马赫数大于0.35时,需要考虑转子半径伸长对泄漏量的影响.      

Primary Solidification Phase and Lamellar Orientation in Directionally Solidified Ti-45Al-7Nb Alloy

Primary solidification phase and lamellar orientation are investigated in Ti-45Al-7Nb alloy at very high ratio of temperature gradient to growth rate (G/v) by a liquid-metal-cooled directionally solidified method. It shows that Ti-45Al-7Nb alloy solidifies with primary α phase. Longitudinal (parallel to growth direction) microstructure shows that α dendrites in solid-liquid mushy zone are discontinuous and transverse microstructure of α dendrites is worm-like feature. Growth direction of α phase is about 80° away from〈0001〉α direction, and close to〈1120〉α direction. The corresponding lamellar orientation is aligned at the angle of about 10° to growth direction, which is consistent with α-dendrite growth direction according to Blackburn orientation relationship. Therefore, due to the altered growth direction of α phase, the lamellar orientation in Ti-45Al-7Nb alloy is controlled at the G/v ratio of 5×109 K·sm-2.     

Modeling gravity effects on water retention and gas transport characteristics in plant growth substrates

Growing plants to facilitate life in outer space, for example on the International Space Station (ISS) or at planned deep-space human outposts on the Moon or Mars, has received much attention with regard to NASA’s advanced life support system research. With the objective of in situ resource utilization to conserve energy and to limit transport costs, native materials mined on Moon or Mars are of primary interest for plant growth media in a future outpost, while terrestrial porous substrates with optimal growth media characteristics will be useful for onboard plant growth during space missions. Due to limited experimental opportunities and prohibitive costs, liquid and gas behavior in porous substrates under reduced gravity conditions has been less studied and hence remains poorly understood. Based on ground-based measurements, this study examined water retention, oxygen diffusivity and air permeability characteristics of six plant growth substrates for potential applications in space, including two terrestrial analogs for lunar and Martian soils and four particulate substrates widely used in reduced gravity experiments. To simulate reduced gravity water characteristics, the predictions for ground-based measurements (1 − g) were scaled to two reduced gravity conditions, Martian gravity (0.38 − g) and lunar gravity (0.16 − g), following the observations in previous reduced gravity studies. We described the observed gas diffusivity with a recently developed model combined with a new approach that estimates the gas percolation threshold based on the pore size distribution. The model successfully captured measured data for all investigated media and demonstrated the implications of the poorly-understood shift in gas percolation threshold with improved gas percolation in reduced gravity. Finally, using a substrate-structure parameter related to the gaseous phase, we adequately described the air permeability under reduced gravity conditions.     

信息化与工业化合力驱动的产业发展新趋势——产业融合

当前,信息产业融合型的增长模式正在快速改变着社会经济的运行方式。产业融合正在加速产业结构的变动,也在推动产业转型升级。产业间的融合渗透促进了新兴业务的活跃爆发,为产业发展带来了一股全新的力量。应当以此为契机,培育新一代产业增长极,以产业融合有力地推动战略性新兴产业发展。     

微重力下胶原蛋白纤维化及羟基磷灰石结晶的初步研究

在长期空间飞行过程中, 骨质丢失是一个严重问题. 羟基磷灰石(HAP)晶体是骨骼的主要成分, 骨骼中的胶原蛋白纤维在HAP生长结晶过程中起到关键作用. 研究了胶原蛋白纤维化过程在模拟微重力和常重力条件下的变化, 对以胶原 蛋白纤维作为模板生长出的HAP晶体形貌进行了观察. 结果表明, 不同浓度胶原蛋白溶液中形成的胶原蛋白纤维, 其内部孔隙数量和尺寸在模拟微重力条件下要明显大于常重力条件下, 胶原蛋白纤维内部孔隙的分布也不同于常重力条 件下的结果. 以模拟微重力条件下形成的胶原蛋白纤维为模板生长出的HAP 晶体主要为立方体状, 而以常重力条件下形成的胶原蛋白纤维为模板生长出的 HAP晶体形貌主要为板状. 该结果有助于未来进一步阐明空间骨质丢失的机理.      

Effect of grain refinement on cutting force of difficult-to-cut metals in ultra-precision machining

The nickel-based superalloy Inconel 718 is treated with Coupled Ultrasonic and Electric Pulse Treatment(CUEPT), and the surface grain is refined from the average size of 9550.0 nm to287.9, 216.3, 150.5, 126.3, 25.8 nm by different effective treatment currents, respectively. The ultraprecision turning experiments are carried out on the processed workpiece after CUEPT. The experimental results show that the average cutting force increases with the decrease of surface grain size.Moreover, a mathema...     

低剂量电离辐射环境下微生物群落物种多样性的产生和维持机制

空间站微生物严重滋生现象表明：在低剂量电离辐射（Low-Dose Ionizing Radiation,LDIR）环境下,微生物群落物种多样性水平大大增加,其机制目前尚不清楚。在前期调查和具体实验观测的基础上,本研究首次提出LDIR能够使微生物群落中的物种产生不同程度的生长延迟效应,从而减小了物种之间的竞争排斥,诱导并维持了微生物群落的物种多样性。本研究基于经典的Lotka-Volterra竞争模型,将生长延迟时间环节引入其中,得到LDIR下微生物群落的演替模型,在Matlab/Simulink平台上进行大规模的计算机仿真实验,获得LDIR下微生物多样性产生和维持的动力学机制,得到结果可为认识低剂量电离辐射环境下微生物群落的演替过程提供科学的理论依据。     

随机谱载荷下含多裂纹结构的概率断裂力学可靠性模型

通过将结构疲劳裂纹在随机谱载荷下的扩展作为一个时间离散的随机过程处理,建立了一个估计各载荷谱周期末的裂纹长度概率分布的裂纹扩展概率断裂力学计算方法。当已知结构裂纹扩展引起的载荷重新分配时,该方法可以给出多裂纹结构随时间变化的各个裂纹的长度的概率分布。在此基础上,本文建立了一个多裂纹结构裂纹相互干扰情况下的结构可靠性模型,并给出了一个简单的算例。     

逐次累积裂纹扩展计算的循环计数方法

给出一种疲劳损伤的累积方法,用于随机谱载下的裂纹扩展模型计算,该方法既能充分计及疲劳裂纹尖端材料的累积损伤作用,又提供了在裂纹扩展模型计算中实时考虑加载序列影响的可能性。本方法可应用于各类疲劳寿命及裂纹增长分析预测模型的计算,克服了以往方法中不能维持原有峰谷序列的缺陷,使模型计算过程更趋合理和符合实际的损伤机制,从而便于各种模型的发展、改进和评价。