Mechanism parameters optimization of bionic frog jumping robot based on velocity directional manipulability measure

以速度方向可操作度作为跳跃性能的评价指标,从机构设计角度寻求改善仿蛙跳跃机器人跳跃性能的方法.在仿蛙跳跃机器人机构模型的基础上,建立了起跳阶段的运动学方程,得到机器人从关节空间到质心运动空间的速度映射关系,结合速度方向可操作度,利用优化算法对仿蛙跳跃机器人的机构参数进行优化,使机器人的跳跃性能达到最佳.优化结果表明,运用速度方向可操作度理论,对跳跃机器人机构参数进行优化研究是有效可行的.     

Using the MIR bands in vegetation indices for the estimation of grassland biophysical parameters from satellite remote sensing in the Alps region of Trentino (Italy)

Development of new methods for estimating biophysical parameters can be considered one of the most important targets for the improvement of grassland parameters estimation at full canopy cover. In fact, accurate assessment methods of biophysical characteristics of vegetation are needed in order to avoid the uncertainties of carbon terrestrial sinks.

Remote sensing is a valid tool for scaling up ecosystem measurements towards landscape levels serving a wide range of applications, many of them being related to carbon-cycle models. The aim of this study was to test the suitability of satellite platform sensors in estimating grassland biophysical parameters such as LAI, biomass, phytomass, and Green herbage ratio (GR). Also, we wanted to compare some of the most common NIR and red/green-based vegetation indices with ones that also make use of the MIR band, in relation to their ability to predict grassland biophysical parameters.

Ground-truth measurements were taken on July 2003 and 2004 on the Monte Bondone plateau (Italian Alps, Trento district) in grasslands varying in land use and management intensities. From satellite platforms, an IRS-1C-LISS III image (18/07/2003; 25 m resolution in the visible-NIR and 70 m resolution in the MIR) and a SPOT 5 image (27/07/2004, 10 m resolution in the visible-NIR and MIR) were used.

LAI, biomass, and phytomass measurements showed logarithmic relationships with the investigated NIR and red/green-based indices. GreenNDVI showed the highest R² values (0.59, IRS 2003; 0.60, SPOT 2004). Index saturation occurred above approximately 100–150 g m⁻² of biomass (LAI 1.5–2). On the other hand, GR relationships were shown to be linear. MIR-based indices performed better than NIR and red/green-based ones in estimating biophysical variables, with no saturation effect. Biomass showed a linear regression with Canopy Index (MIR/green ratio) and with the Normalised Canopy Index (NCI) calculated as a normalised difference between MIR and green bands (IRS: R² = 0.91 and 0.90, respectively. SPOT: R² = 0.63 and 0.64). Similar correlations could also be found for LAI and phytomass, and GR predictability was shown to be higher than NDVI and GreenNDVI. According to these results obtained in the investigated areas, phytomass, biomass, LAI, and GR are linearly correlated with the investigated MIR band indices and as a result, these parameters could be estimated from the adopted satellite platforms with limited saturation problems.     

自由返回轨道的P平面参数快速设计方法

针对自由返回轨道求解过程中地心轨道类型变化造成的B平面参数方法计算失败问题,提出一种基于P平面参数的自由返回轨道快速设计方法。首先,基于轨道半通径参数的普适性,给出了不同轨道类型的P平面参数定义,建立了以P平面参数为求解目标量的自由返回轨道求解模型。其次,给出了基于P平面参数的自由返回轨道快速设计方法,在构建的瞬时地月惯性系下,以平面双二体自由返回轨道作为初值,实现了高精度力模型下的自由返回轨道快速求解。对8种构型自由返回轨道的设计结果表明,P平面参数具有类似于B平面参数的大收敛域,且有效解决了轨道类型变化对计算的影响,可直接应用于中国后续月球探测任务轨道设计。     

Accuracy enhancement of the spherical actuator with a two-level geometric calibration method

This paper presents a two-level geometric calibration method for the permanent magnet （PM） spherical actuator to improve its motion control accuracy. The proposed actuator is com- posed of a stator with circumferential coils and a rotor with multiple PM poles. Due to the assembly and fabrication errors, the real geometric parameters of the actuator will deviate from their design values. Hence, the identification of such errors is critical for the motion control tasks. A two-level geometric calibration approach is proposed to identify such errors. In the first level, the calibration model is formulated based on the differential form of the kinematic equation, which is to identify the geometric errors in the spherical joint. In the second level, the calibration model is formulated based on the differential form of torque formula, which is to calibrate the geometric parameters of the magnetization axes of PM poles and coils axes. To demonstrate the robustness and availability of the calibration algorithm, simulations are conducted. The results have shown that the proposed two-level calibration method can effectively compensate the geometric parameter errors and improve the positioning accuracy of the spherical actuator.     

结合损伤力学与有限元方法预估铆接结构疲劳寿命

利用飞机铆接试验件疲劳试验数据,结合损伤力学与有限元方法,通过MATLAB调用ABAQUS进行损伤演化方程参数的遗传优化反演。将反演得到的损伤演化方程用于飞机结构疲劳寿命预估中,对机翼蒙皮锪窝形式的铆接结构进行了寿命计算和分析,并与试验数据作对比,证明了方法的可行性。     

基于GA-ELM的飞行载荷参数识别

针对用复杂飞行数据识别飞行载荷时的精度低、速度慢等问题,提出一种结合遗传算法(GA)和极限学习机(ELM)的GA-ELM模型。该模型使用ELM神经网络作为计算核心,用遗传算法产生ELM网络输入层到隐含层的权值矩阵和隐含层偏移量;用GA-ELM模型对飞行数据进行识别,并与BP神经网络和原始ELM神经网络的识别结果进行对比。结果表明:GA-ELM模型是一种有效且高精度的飞行载荷参数识别方法。     

涡扇发动机故障诊断硬件在回路实时仿真平台

硬件在回路仿真是发动机故障诊断算法由理论转向实际工程应用的重要阶段,但目前航空发动机故障诊断算法的研究多数处于软件数字仿真阶段。构建民用涡扇发动机故障诊断算法硬件在回路实时仿真验证平台,开发考虑健康退化的民用涡扇发动机多维调度分段线性化模型,分析并模拟仿真民用涡扇发动机的四类典型常见故障。经过对相关诊断算法进行实验验证,表明该平台及使用的模型和方法都是行之有效的,具有一定的工程使用价值。     

多通道控制／检测操纵台

本操纵台可以对６４个通道或号位的综合参数，如温度、压力、温度、物位、流量等刊物民检测，它具有两种功能；（１）对６４个地点的进行自动巡回控制／检测；（２）可随意对任意地的参数进行优化控制／检测。     

M40/4211 复合材料层合板铣削加工试验

通过分析碳纤维复合材料的性能特点及对切削加工性能的影响,提出了铣削刀具材料和几何结构形式的选用原则,介绍了几种适于碳纤维复合材料铣削的加工刀具。针对碳纤维复合材料中常用的M40/4211复合材料层合板进行加工缺陷试验和切削试验,总结出影响M40/4211复合材料层合板加工质量的因素及规律,得到每种刀具加工M40/4211复合材料层合板的最佳加工参数,较高的切削速度配合恰当的进给速度可以有效提高M40/4211复合材料层合板的加工质量和加工效率。     

基于叶尖定时的叶片耦合振动参数辨识与仿真

为了实时掌握叶片振动情况、预防故障发生,目前最常用的非接触振动测量方法是基于单自由度模型的叶尖定时法,但当叶片耦合振动时2个振动峰相隔很近,该方法无法同时识别出其振动参数。采用基于2自由度模型的曲线拟合方法,得到叶片耦合振动2个峰的初始相位等参数,用相位遍历法辨识出叶片的振动阶次和频率。结果表明:采用基于2自由度模型的曲线拟合方法提高了叶片耦合振动参数辨识的精度,辨识了相邻2个峰的振动参数。辨识振动与仿真参数设置基本一致。