单星定向技术研究

提出了一种仅利用一颗地球静止轨道卫星完成定向的新方法,并利用北斗双星定位系统进行了定向试验.试验结果表明,对于0.827 m长基线,单星定向精度可达0.07°,从而说明利用一颗地球静止轨道卫星进行定向在原理上是正确的,方法是可行的.      

我国风云卫星体系的发展思考

风云系列气象卫星发展始终坚持以国家重大战略为蓝图,以解决中国的气象观测问题为宗旨,秉承"开放合作、服务世界"的理念,发展具有中国特色的气象卫星观测体系.风云卫星是我国民用遥感卫星中应用范围最广、效益发挥最好的卫星系列之一,为国民经济发展和国防建设作出了重要贡献,已成为世界气象组织全球卫星观测网重要成员,是服务国家重大战...     

卫星通信干扰样式研究

综述通信对抗干扰的分类方式,分析了部分文献中对干扰样式划分的不合理性.根据卫星通信对抗的特点将通信对抗干扰样式进行分类,并从与压制式干扰相区别的角度对欺骗式干扰做出研究分析.     

卫星用两种单相流体回路方案对比研究

单相流体回路系统是航天器主动热控技术中的一种重要方式。文章概述了流体回路的工作原理及理论基础，总结了单相流体回路的设计思路，结合某卫星型号，设计了两种流体回路方案，在SINDA／FLUINT中建立数值仿真模型进行分析计算，并比较了两种方案的应用性能。结果显示，将单相流体回路系统应用于卫星，可取得较好的控温效果。     

Development,integrated investigation,laboratory and in-flight testing of Chibis-M microsatellite ADCS

Design, analytical investigation, laboratory and in-flight testing of the attitude determination and control system (ADCS) of a microsatellites are considered. The system consists of three pairs of reaction wheels, three magnetorquers, a set of Sun sensors, a three-axis magnetometer and a control unit. The ADCS is designed for a small 10–50 kg LEO satellite. System development is accomplished in several steps: satellite dynamics preliminary study using asymptotical and numerical techniques, hardware and software design, laboratory testing of each actuator and sensor and the whole ADCS. Laboratory verification is carried out on the specially designed test-bench.In-flight ADCS exploitation results onboard the Russian microsatellite “Chibis-M” are presented. The satellite was developed, designed and manufactured by the Institute of Space Research of RAS. “Chibis-M” was launched by the “Progress-13M” cargo vehicle on January 25, 2012 after undocking from the International Space Station (ISS). This paper assess both the satellite and the ADCS mock-up dynamics. Analytical, numerical and laboratory study results are in good correspondence with in-flight data.     

现代小卫星与大众化空间时代

通过论述现代小卫星技术30年的发展历程,总结其技术发展水平并举出现阶段的典型应用实例,讨论小卫星未来的发展方向,论述大众化空间与现代小卫星的关系,总结现代小卫星技术服务于大众化空间的各项特征。     

航天器的数字化总装设计研究

文章总结了航天器数字化总装设计的基本思路、方法和经验，阐明了数字化总装设计所发挥的作用和意义。     

绳系卫星部署阶段的动力学分析

绳系卫星系统部署阶段末时刻状态决定着其编队飞行的初始状态，为了研究不同因素对绳系卫星系统部署阶段运动的影响，本文建立了一种简单的平面哑铃模型，将系绳视作有阻尼的弹簧，两个卫星视作刚体，考虑重力梯度力矩。通过仿真，发现系绳释放的速度和副星推力是影响绳系卫星系统部署阶段稳定性的主要因素。     

基于拉盖尔函数的卫星姿态预测控制方法

针对卫星在空间站中进行绕飞检测时的姿态控制问题，考虑卫星的姿态轴需要躲避禁飞区域并指向期望位置，提出了一种基于拉盖尔函数的模型预测控制方法，实现了对卫星姿态轴的控制。在模型预测控制方法的基础上，通过拉盖尔函数，将优化多个控制输入转换为优化少数的拉盖尔系数，建立了拉盖尔模型预测的控制策略，改善了传统的模型预测控制方法计算效率差的问题，减少了优化时间。采用卫星在空间站中绕飞的模型进行数值仿真验证，结果表明该方法能够使卫星的姿态轴躲避禁飞区并到达指定位置。与传统方法相比，这种基于拉盖尔函数的模型预测控制策略能够提高优化效率，减少计算时间。     

Zenith Pass Problem of Inter-satellite Linkage Antenna Based on Program Guidance Method

While adopting an elevation-over-azimuth architecture by an inter-satellite linkage antenna of a user satellite, a zenith pass problem always occurs when the antenna is tracing the tracking and data relay satellite （TDRS）. This paper deals with this problem by way of, firstly, introducing movement laws of the inter-satellite linkage to predict the movement of the user satellite antenna followed by analyzing the potential pass moment and the actual one of the zenith pass in detail. A number of specific orbit altitudes for the user satellite that can remove the blindness zone are obtained. Finally, on the base of the predicted results from the movement laws of the inter-satellite linkage, the zenith pass tracing strategies for the user satellite antenna are designed under the program guidance using a trajectory preprocessor. Simulations have confirmed the reasonability and feasibility of the strategies in dealing with the zenith pass problem.