Relationship Between Compression Strength and Its Microstructure of 5 Axial-Braided Composite

Compression performance of 5-axial braided composites is observed through compression tests.A mixed model of micro-buckling shear with braided tows web is set up to predict compression stress of braided composite through analyzing three broken modes.Using this mixed model,data from tests indicated that the main parameters effecting the compression properties of braided composite are fiber volume fraction,directional angle,axial-tow volume fraction and diameter of tow.Contributing rate of tows is proposed to describe the compression properties of fibre composites.Optimization geometrical structure of braids can optimize composite properties.     

三维编织炭纤维预制件压缩性实验研究

采用压缩实验对三维编织四向、五向和六向结构炭纤维预制件在受压时的厚度与纤维体积含量的变化和压缩参数进行了研究,得到了首次压缩后干湿态炭纤维预制件的最大纤维体积含量,以及干态炭纤维预制件3次压缩后的最终纤维体积含量.结果表明,预制件的干湿状态和受压缩次数对预制件的压缩性有显著影响.预制件在卸除载荷后发生部分回弹,各编织结构预制件的初始预制件体积压缩性随着压缩次数的增加而减小;从结构上看,各编织结构预制件的编织纱截面和轴纱截面形状在压缩后发生改变.     

地效飞行器重量估算方法

根据地效飞行器(WIG)的特点确定了3类地效飞行器的任务剖面,分析其与一般飞行器任务剖面和相关性能的异同点以及重量估算方法的适用度。通过现有地效飞行器数据和资料的整理,研究其起飞重量与空机重量以及其他各项参数的统计关系。比照一般飞行器重量估算的燃油系数法,确定地效飞行器各任务阶段的燃油系数及其相关计算过程中选择参数的修正。通过数据分析计算起飞重量和空机重量估算中的线性回归值,形成适用于各类地效飞行器的重量估算方法及其推荐经验系数。验算结果证明,A类和B类地效飞行器重量估算结果与实际产品基本相符,C类由于缺乏足够的统计数据,因此难以验算,但实际工程设计应用结果与经验类比法得到的重量估算结果基本一致,表明研究结果能够满足总体设计阶段重量估算的任务要求。     

Microstructure evolution of a hypereutectic Nb–Ti–Si–Cr–Al–Hf alloy processed by directional solidification

In this work, the Nb–14Si–24Ti–10Cr–2Al–2Hf–0.1Y alloy(at.%) was processed by the liquid–metal-cooled directional solidification(DS) at 1750 C with withdrawal rates of 1.2, 6,18 mm/min and post heat treatment(HT) at 1450 C for 10 h. The microstructures of the directionally solidified and heat treated samples were investigated. The results show that the microstructure of directionally solidified alloy mainly consists of petaloid Nbss+ Nb5Si3eutectics and Ti-rich Nbss+ Nb5Si3+ Cr2Nb eutectics. With the increase of withdrawal rate, the primary Nb5Si3is eliminated, Nbss+ Nb5Si3eutectic cells turn round and connected with the microstructure refinement and Nbss+ Nb5Si3+ Cr2Nb eutectics turn to a river-like morphology. After heat treatment,Nbss+ Nb5Si3+ Cr2Nb eutectics disappeared and petaloid Nbss+ Nb5Si3eutectics turn to a specific fiber-mesh structure gradually, which is promoted by higher withdrawal rates. Furthermore,both the volume fraction of Cr2Nb and the content of Cr in Nbssof Nbss+ Nb5Si3eutectics change regularly with the increase of withdrawal rate and heat treatment at 1450 C for 10 h.     

高体积分数SiCp/Al激光诱导氧化辅助铣削研究

为了解决高体积分数的SiC_p/Al复合材料在常规切削加工中存在切削力大、刀具磨损快、表面完整性差等问题。本文针对高体积分数SiC_p/Al材料开展激光诱导氧化辅助铣削技术研究，通过激光辐照铣削区域形成易于去除的疏松氧化层提高切削性能，同时开展氧化层调控策略及激光诱导氧化辅助下的铣削参数优化工艺研究，研究不同激光能量密度、辅助气体对氧化层质量的影响及铣削参数优化。结果表明随激光能量密度的增大热影响区宽度和烧蚀沟槽深度随之增加，在氧气辅助下易形成疏松且易于去除氧化层。选取较高的激光能量密度可获得较好的氧化效果，而使用PCD金刚石铣刀，主轴转速为10 000 r/min，在每齿进给量为7.5 μm /s可获得最佳表面质量。