多斜孔火焰筒壁冷却结构的数值模拟

通过数值模拟对多斜孔火焰筒冷却结构平板模型进行了研究,重点探讨了吹风比、孔斜角、孔阵排列方式、复合角和孔结构对壁面绝热温比的影响规律.结果表明:吹风比和孔斜角的大小对斜孔板的冷却效果有较大的影响,吹风比越大和孔斜角越小,冷却效果越好;孔阵的排列方式对冷却效果有一定的影响,长菱形分布优于正菱形分布;而孔偏角的引入则对冷却不利;与普通圆柱型斜孔相比,所提出的缩扩型斜孔在较低的吹风比下有利于改善冷却效果,而在大吹风比下则对冷却不利.      

导流锥结构参数对燃气弹射筒内压力冲击平滑效果影响研究

针对导流锥结构参数对内弹道流场耦合影响问题,基于动态分层动网格技术,构建了含导弹运动和二次燃烧的内弹道数值模型,并验证了模型可靠性。解耦分析了导流锥半径、高度及冲击高度对内弹道流场特性和载荷的影响。结果表明：导流锥的结构直接决定燃气飞溅现象的产生和流场结构的紊乱程度,导流锥的半径、高度和冲击高度的改变会对燃气反射点的位置、二次燃烧的区域以及剧烈程度产生影响;结构优化后的导流锥,较大程度地缓解了冲击现象,获得了较好的平滑效果,筒底压力较实验装置降低了24.5%。     

Effect of tube-electrode inner diameter on electrochemical discharge machining of nickel-based superalloy

Nickel-based superalloys are widely employed in modern aircraft engines because of their excellent material characteristics, particularly in the fabrication of film cooling holes. How-ever, the high machining requirement of a large number of film cooling holes can be extremely chal-lenging. The hybrid machining technique of tube electrode high-speed electrochemical discharge drilling (TEHECDD) has been considered as a promising method for the production of film cooling holes. Compared with any single machining process, this hybrid technique requires the removal of more complex machining by-products, including debris produced in the electrical discharge machin-ing process and hydroxide and bubbles generated in the electrochemical machining process. These by-products significantly affect the machining efficiency and surface quality of the machined prod-ucts. In this study, tube electrodes in different inner diameters are designed and fabricated, and the effects of inner diameter on the machining efficiency and surface quality of TEHECDD are inves-tigated. The results show that larger inner diameters could effectively improve the flushing condi-tion and facilitate the removal of machining by-products. Therefore, higher material removal efficiency, surface quality, and electrode wear rate could be achieved by increasing the inner diam-eter of the tube electrode.     

气相色谱法定量分析氧气中气体杂质方法研究

为寻找一种能够有效检测氧气中微量气体杂质的方法,采用配有氢火焰离子化检测器的气相色谱仪分析氧气中的微量气体杂质,研究了分析氧气中CO、CO₂及C₂H₂等气体杂质的操作参数,确定了氧气中微量气体杂质的分析方法,验证了该方法的可行性,该分析方法各组份分离效果良好,各种杂质组份定量精确度较高。     

小孔法测量非均匀残余应力的数据处理与误差分析

讨论了逐层钻孔法测量非均匀残余应力的释放应变处理和测量误差对残余应力计算精度的影响。利用转换应力、转换应变,可方便地计算残余应力值。受小孔法本身缺陷的限制,计算所得残余应力误差随孔深增加而加大,测量深度约为应变片平均半径的一半。     

碳纤维复合材料高质量制孔工艺

制孔质量是导致碳纤维复合材料产品报废的重要因素.本文从机械加工的角度,论述了碳纤维复材产品制孔工艺过程中的主要缺陷及其形成机理.为解决这些缺陷,根据其形成机理,设计了相关对比工艺试验.在试验验证的基础上,提出了碳纤维复合材料高质量制孔的工艺参数.     

Numerical analysis of deflection control of a gas plasma jet based on magnetohydrodynamic staggered electrode configuration

To control the deflection of the gas plasma jet, a new analytical method is proposed based on the Magnetohydrodynamic(MHD) technique. Based on the typical MHD power generation model, the applied voltage is applied to the staggered electrodes, that is, a pair of electrodes on the same side wall are connected to generate an axial current in the channel. Under the action of the magnetic field perpendicular to the direction of the flow, the plasma is subjected to electromagnetic forces perpendicular...     

含孔边裂纹各向异性有限板的二维问题

应用边界元法,并结合一种特殊的复变函数基本解,研究了含孔边裂纹的各向异性有限板的应力强度因子修正系数的计算。这种特解边界元法避免了在裂纹附近划分单元,可以获得较好的数值计算精度。通过算例分析,结果表明本方法精度高,运算量小,具有一定的工程应用价值。     

纳米Sn-Zn-Fe复合氧化物气敏材料的研制

本文采用纳米材料制备技术（共沉淀法）,制备了十二种Ｓｎ－Ｚｎ－Ｆｅ复合氧化物气敏材料,将其制成元件后,进一步测试了气敏性能。结果发现其敏感度比用ＳｎＯ２、ＺｎＯ和Ｆｅ３Ｏ４机械混合制得的烧结元件大为提高,且有较好的选择性。     

喷管分离流流动-热-结构顺序耦合数值模拟及试验研究

针对大膨胀比喷管气流分离状态下喷管所受的复杂载荷,采用数值方法分析喷管结构.利用有限体积二阶迎风插值格式及SST涡耗散湍流模型,结合二层增强型壁面函数,求解N-S方程、热传导方程.采用流固耦合的流动与换热模型,流场与结构温度场互为边界条件交互数据,实现了流场解算与温度场解算的耦合数值分析.应用有限元方法对给定的温度场及压力载荷作用下的结构进行了瞬态静力分析,实现了流动-热-结构的顺序耦合.采用此计算模型对轴对称拉瓦尔喷管进行了数值模拟,发现在大膨胀比下喷管发生气流分离,经分离处的斜激波后气流温度梯度及压力梯度变化较大,导致该区域应力较大.为验证模型的准确性,开展了试验研究,测得的气流分离位置和计算得到的分离位置很好的符合,说明了计算方法的有效性.