加工工艺对7075 铝合金紧固孔表面质量的影响

为确定最佳制孔工艺、获得理想表面特性,从表面完整性和疲劳寿命角度对7075铝合金飞机紧固孔表面质量进行了实验性和数值仿真研究.通过比较常规多步制孔和钻扩铰一步复合工艺(Winslow),发现钻扩铰多步慢进给工艺(DBM)和Winslow所产生的表面具有较小的Ra值,较少的加工缺陷、较大的残余压应力及较高的疲劳强度,而后者的Ra值低于前者60％,疲劳寿命高于前者23％;基于实验数据,建立了切削参数对表面粗糙度和残余应力影响的经验公式;应用数值仿真分析了加工过程中应变和切削温度的变化规律;探讨了Winslow工艺的强化机理;指出适当减少进给量、增加切削速度能够提高紧固孔的表面质量.     

薄板孔边挤压强化对高周疲劳寿命影响的试验

为提高某压气机封严篦齿盘均压孔的疲劳强度,根据均压孔的具体结构形式,设计了三种冷挤压强化方法:单侧多次挤雎法、柱形头挤压法和T形头挤压法.用两种材料(不锈钢1Cr11Ni2W2MoV和镍基高温合金3Y1742)设计加工了带孔薄板模拟件,用上述三种强化方法对孔边进行了强化,同时进行了室温和高温两种温度下的高周疲劳对比试验...     

气量分配对轴径向旋流杯燃烧室贫熄边界的影响

针对轴径向旋流杯燃烧室,研究了头部进气面积及主燃孔布局对此类燃烧室贫熄特性的影响.实验结果表明:减小一级轴向旋流器进气面积和增加主燃孔个数对燃烧室贫熄性能有较大影响.一级进气面积减小20%可拓宽贫熄边界9.7%;增加主燃孔为4个时,燃烧室贫熄边界变宽约7.6%.此外,增加一级进气面积20%,改变二级进气面积20%及改变主燃孔个数为2个等情况对燃烧室贫熄边界影响较小.      

应用气动谐振点火的氢氧小发动机试验

将气动谐振点火技术应用于小推力氢氧火箭发动机的设计,通过分析不同混合比下的比冲和燃气温度,确定了氢氧小发动机的总体参数,开展了在不同工况下点火器的单独试验,氢氧小发动机的全系统试验以及小发动机脉冲起动试验。研究结果表明,氢氧小发动机可以实现多次重复起动,结构完好,性能稳定,验证了应用气动谐振点火技术氢氧小发动机的可靠性及方案的可行性。     

High energy radiation from the direction of the galactic black hole Sgr A

X-ray observations indicate that the Galactic black hole Sgr A^∗ is inactive now, however, we suggest that Sgr A^∗ can become active when a captured star is tidally disrupted and matter is accreted into the black hole. Consequently the Galactic black hole could be a powerful source of relativistic protons with a characteristic energy ∼10⁵² erg per capture. The diffuse GeV and TeV γ-rays emitted in the direction of the Galactic Center (GC) are the direct consequences of p–p collisions of such relativistic protons ejected by very recent capture events occurred ?10⁵ yr ago. On the other hand, the extended electron-positron annihilation line emission observed from GC is a phenomenon related to a large population of thermalized positrons, which are produced, cooled down and accumulated through hundreds of past capture events during a period of ∼10⁷ yr. In addition to explaining GeV, TeV and 511 keV annihilation emissions we also estimate the photon flux of several MeV resulting from in-flight annihilation process.     

ΔDsat,a QB50 CubeSat mission to study rarefied-gas drag modelling

A CubeSat mission to study the impact of flow incidence angle, surface material and surface roughness on gas–surface interactions on spacecraft in low Earth orbits has been designed. To accomplish this scientific goal the CubeSat deploys a variable geometry aerofoil capable of exposing different surfaces to the flow at different incident angles. By using the on-board GPS measurements and an orbit determination technique the drag experienced by the CubeSat can be estimated. The CubeSat has been designed to be part of the QB50 mission, and hence it carries a sensor that can take in-situ measurements of the atmosphere. This is then used to estimate the atmospheric density and hence to extract information on the drag coefficient. To minimise any bias present in the measurement chain a differential approach is used. Therefore no absolute drag coefficients are estimated, instead, ratios of drag coefficients are computed. This allows direct comparisons of the drag coefficients of different materials, different surface roughness or different incident angles. Simulations indicate that this CubeSat mission will be able to obtain drag coefficient ratios with an uncertainty level of less than 5%.     

气相色谱测定偏二甲肼纯度方法的改进

研究了气相色谱内标法代替常规的标准工作曲线法测定偏二甲肼纯度（ＵＤＭＨ）。用内标与偏二甲肼混合样品,避免了微量进样不准确的缺陷。结果表明,该方法相对标准偏差接近于１％,回收率大于９８．０％。     

Theoretical investigation of shock stand-off distance for non-equilibrium flows over spheres

We derived a theoretical solution of the shock stand-off distance for a non-equilibrium flow over spheres based on Wen and Hornung’s solution and Olivier’s solution. Compared with previous approaches, the main advantage of the present approach is allowing an analytic solution without involving any semi-empirical parameter for the whole non-equilibrium flow regimes. The effects of some important physical quantities therefore can be fully revealed via the analytic solution. By combining the current solution with Ideal Dissociating Gas (IDG) model, we investigate the effects of free stream kinetic energy and free stream dissociation level (which can be very different between different facilities) on the shock stand-off distance.     

Theoretical study of flow ripple for an aviation axial-piston pump with damping holes in the valve plate

Based on the structure of a certain type of aviation axial-piston pump＇s valve plate which adopts a pre-pressurization fluid path （consisting a damping hole, a buffer chamber, and an orifice） to reduce flow ripple, a single-piston model of the aviation axial-piston pump is presented. This sin- gle-piston model comprehensively considers fluid compressibility, orifice restriction effect, fluid resistance in the capillary tube, and the leakage flow. Besides, the instantaneous discharge areas used in the single-piston model have been calculated in detail. Based on the single-piston model, a multi-piston pump model has been established according to the simple hydraulic circuit. The sin- gle- and multi-piston pump models have been realized by the S-function in Matlab/Simulink. The developed multi-piston pump model has been validated by being compared with the numerical result by computational fluid dynamic （CFD）. The effects of the pre-pressurization fluid path on the flow ripple and the instantaneous pressure in the piston chamber have been studied and opti- mized design recommendations for the aviation axial-piston pump have been given out.