TiAlN 涂层钻头钻削钛合金的实验研究

采用Ti Al N涂层硬质合金麻花钻对钛合金(TC4)进行钻削试验,研究了切削用量对轴向力、加工孔壁表面粗糙度和切屑形态的影响。结果表明:轴向力随着进给量的增加而增加,轴向力随着转速的增加而减小。运用指数公式模型对轴向力实验结果进行回归分析,得到轴向力与转速以及进给量之间的关系式,并对该方程进行了检验验证误差均小于7%;随着进给量的增加断屑能力逐渐增加,切屑长度逐渐变短。在低转速和进给量为50 mm/min时切屑形态为短螺旋形切屑,此时排屑和孔壁粗糙度均为最佳。     

细长小孔超精密光整加工技术研究

目前细长小孔的超精密光整加工已成为保证液压系统清洁度要求、避免伺服阀喷嘴或油滤孔堵塞的一项关键技术。通过分析液压系统中细长小孔的结构特征与功能特点,分别从底孔加工、孔壁光整和清洗等方面进行细长小孔超精密光整加工技术研究,成功实现细长小孔孔壁均匀光整与高清洁度指标要求。     

铜铬复合电极电火花小孔加工机理及试验研究

电火花小孔加工中存在工具电极损耗严重、加工速度慢、棱角变钝出现锥度等问题。分析其存在问题的原因,提出采用铜铬复合电极进行电火花小孔加工。分析其加工机理并进行实验,实验结果表明:采用铜铬复合电极进行小孔加工比采用铜电极进行小孔加工能显著提高加工速度,减小锥度和电极相对损耗。     

Comparative study of productivity of the Rosetta target Comet 67P/Churyumov-Gerasimenko

In an attempt to evaluate correlations between several properties of comets we report the results of a cometary research involving a criterious analysis of gas and dust mass production rates in Comets 67P/Churyumov-Gerasimenko (main target of Rosetta Mission), 1P/Halley, Hyakutake (C/1996 B2), and 46P/Wirtanen and make a comparison between them.     

火星进入气体辐射加热研究进展

针对飞行器进入火星大气时气体辐射加热对防热设计带来不确定性，在简述火星探测和气体辐射研究的发展历程的基础上，对火星进入气体辐射加热研究的进展进行综述。首先，针对火星大气环境描述了气体辐射加热的概念和问题由来。其次，重点综述了近年来火星进入气体辐射加热基础模型的数值和试验研究进展，其中包括：热化学非平衡气体动力学、气体辐射特性和辐射传输的计算模型与方法等数值研究；地面测试设备、试验技术和模拟火星大气环境的气体辐射测量与验证等试验研究。再次，综述了流动辐射耦合和后体气体辐射加热等火星进入器设计方面开展的研究。最后，对未来火星进入气体辐射加热研究进行了展望，提出了研究建议。     

基于声学黑洞效应的直升机驾驶舱宽带降噪

声学黑洞（ABH）效应是利用结构阻抗的变化，使结构中传播的波相速度和群速度发生变化，在结构局部区域实现波的聚集，进而通过少量阻尼将能量耗损。该方法具有高效、轻质、宽频等优点，为结构振动噪声控制提供了新的思路，具有较强的潜能和应用前景。本文针对直升机驾驶舱复杂的噪声问题，根据噪声源和传递路径，提出基于ABH效应的内嵌式和附加式2种减振降噪设计方案。利用有限元软件建立了结构声振耦合模型，分析了直升机驾驶舱模型的声振特性，解释了ABH效应有助于降低舱室噪声的机理，并搭建了实验平台，开展了效果测试和性能评估。结果表明，内嵌式ABH结构可以有效降低舱内的中高频噪声，而低频控制能力略显不足。附加式ABH结构可以弥补这一局限性，拓宽有效频带。结合内嵌式和附加式ABH 2种控制方案，相比传统结构在总质量不增加甚至略有降低的前提下，舱室平均噪声水平在1/3倍频程内降低3~10 dB。该研究成果有助于推进ABH新技术在未来直升机工程减振降噪中的应用。     

Low Velocity Collisions and the Growth of Planetesimals

The physics of low velocity collisions (5 m/s to 40 m/s) between basalt bodies ranging in size from 1 m to 10 km is studied in an effort to investigate the early phases of planetesimal accretions. To assess the importance of the internal structure of planetesimals on the outcome of the collisions, we model them either as solid spheres or as rubble piles with a filling factor of 0.5. The collisions are simulated using a three dimensional Smooth Particle Hydrodynamics (SPH) code that incorporates the combined effects of material strength and a brittle fragmentation model. This approach allows the determination not only of the mass of the largest fragments surviving the collisions but also their dynamical characteristics. We find that low velocity collisions are for equal incoming kinetic energy per gram of target material considerably more efficient in destroying and dispersing bodies than their high velocity counterparts. Furthermore, planetesimals modeled as rubble piles are found to be characterized by a disruption threshold about 5 times smaller than solid bodies. Both results are a consequence of a more efficient momentum transfer between projectile and fragments in collisions involving bodies of comparable sizes. Size and shape dependent gas drag is shown to provide relative collision velocities between similar meter-sized objects well in excess of the critical disruption threshold of either rubble piles or solid bodies. Unless accretion can proceed avoiding collisions between bodies of similar masses, the relative weakness of bodies in this size range creates a serious bottleneck for planetesimal growth. This revised version was published online in June 2006 with corrections to the Cover Date.     

某型涡桨发动机减速器负拉力试验不合格故障分析

针对某型涡桨发动机减速器负拉力试验不合格故障，分析了负拉力传感器的结构特点和影响因素，建立了故障树开展故障排查，明确了故障原因，提出了改进措施。     

Experimental comparison between aircraft fuel tank inerting processes using NEA and MIG

Fuel tank inerting technologies are able to reduce the fire risk by injection of inert gas into the ullage or fuel, the former called ullage washing and the latter fuel scrubbing. The Green On-Board Inert Gas Generation System (GOBIGGS) is a novel technology based on flameless catalytic combustion, and owning to its simple structure and high inerting efficiency, it has received a lot of attentions. The inert gas in the GOBIGGS is mainly comprised of CO₂, N₂, and O₂ (hereinafter, Mixed Inert Gas (MIG)), while that in the On-Board Inert Gas Generation System (OBIGGS), which is one of the most widely used fuel tank inerting technologies, is Nitrogen-Enriched Air (NEA). The solubility of CO₂ is nearly 20 times higher than that of N₂ in jet fuels, so the inerting capability and performance are definitely disparate if the inert gas is selected as NEA or MIG. An inerting test bench was constructed to compare the inerting capabilities between NEA and MIG. Experimental results reveal that, if ullage washing is adopted, the variations of oxygen concentrations on the ullage and in the fuel are nearly identical no matter the inert gas is NEA or MIG. However, the ullage and dissolved oxygen concentrations of MIG scrubbing are always higher than those of NEA scrubbing.     

基于激光旋切法的陶瓷材料盲孔加工方法研究

介绍了激光打孔的基本原理,对激光能量、离焦量、轨迹在激光旋切法加工盲孔过程中对孔形和表面质量的影响进行了分析和试验验证,并给出了一般规律.依据试验结果确定了合理工艺参数,采用旋切法在碳纤维增强碳化硅陶瓷基复合材料（Cf/SiC）上打出了孔径为1 mm,孔深为1.1 mm,锥度小于15°的盲孔.