Numerical analysis of deflection control of a gas plasma jet based on magnetohydrodynamic staggered electrode configuration

To control the deflection of the gas plasma jet, a new analytical method is proposed based on the Magnetohydrodynamic(MHD) technique. Based on the typical MHD power generation model, the applied voltage is applied to the staggered electrodes, that is, a pair of electrodes on the same side wall are connected to generate an axial current in the channel. Under the action of the magnetic field perpendicular to the direction of the flow, the plasma is subjected to electromagnetic forces perpendicular...     

Measurements of heat transfer and pressure in a trailing edge cavity of a turbine blade

 An experimental investigation is conducted to obtain the heat transfer and pressure drop data for an integral trailing edge cavity test section that simulates a novel turbine blade's internal cooling passage with bleed holes. Local heat transfer is measured on both the suction and pressure sides by a transient liquid crystal technique, while pressures at six positions are recorded by pressure calibrators. Moreover, flow characteristic and its effect on heat transfer are analyzed for conditions with or without bleed flow. The experimental results show that, in the cases with bleed flow, local heat transfer on the pressure side exceeds that on the suction side in the first and second channels. In the cases without bleed flow, in the first and third channels, local heat transfer on the suction side weakens whilst it increases significantly on the pressure side. For the second channel, non-bleed condition leads to a more balanced heat transfer distribution between the upstream and downstream channel. Besides, after the bleed holes are blocked, heat transfer in the first bend region on the suction side declines sharply, while the opposite phenomenon occurs for the second bend region on the pressure side. In both bleed and non-bleed cases, the total pressure of six measurement positions decreases continuously along the channel at the same Reynolds number and it promotes for higher Reynolds number. Among all the measurement points, under the same flow rate condition, the highest speed occurs at Position 5, which also shows the maximum difference between the total and static pressures. When the bleed holes are blocked, the total pressure at each measurement position appears to increase.     

耐高液（气）压部附件测试系统的开发

飞机上耐高液（气）压部附件易发生泄漏破损等问题，对飞机的安全运行至关重要。本文开发了一种测试系统，以气体和液体为介质，以飞机蓄压器为例，通过压力检查、泄露测试、摩擦阻力测试，检测待测部件是否合格。检测结果证明，该测试系统可作为飞机机械系统耐高液（气）压部附件检测的一种参考方法。     

Investigations into sensing characteristics of circular thin-plate electrostatic sensors for gas path monitoring

Circular thin-plate electrostatic sensors are promising in gas path monitoring due to their advantages of non-intrusiveness and easy installation. The spatial sensitivity and filtering effect are two important performance parameters. In this paper, an analytically mathematical model of induced charge on a circular thin-plate electrode is first derived. Then the spatial sensitivity and filtering effect of the circular electrostatic sensor are investigated by numerical calculations. Finally,experimental studies are performed to testify the theoretical results. Both theoretical and experimental results demonstrate that circular thin-plate electrostatic sensors act as a low-pass filter in the spatial frequency domain, and both the spatial filtering effect and the temporal frequency response characteristics depend strongly on the spatial position and velocity of the charged particle. These conclusions can provide guidelines for the optimal design of circular thin-plate electrostatic sensors.     

Assessing the feasibility of involving gaseous products resulting from physicochemical oxidation of human liquid and solid wastes in the cycling of a bio-technical life support system

The study addresses the possible ways of involving gaseous products produced by “wet” incineration of human wastes mixed with H₂O₂ in an alternating electric field in the cycling of the physical model of a bio-technical life support system (BTLSS). The resulting gas mixture contains CO₂ and O₂, which are easily involved in the cycling in the closed ecosystem, and NH₃, which is unacceptable in the atmosphere of the BTLSS. NH₃ fixation has been proposed, which is followed by nitrification and involvement of the resulting products in the mass exchange of the closed system. Experiments have been performed to show that plants can be grown in the atmosphere resulting from the closing of the gas loop that includes a physicochemical installation and a growth chamber with plants representing the phototrophic compartment of the BTLSS. The results of the study suggest the conclusion that the proposed method of organic waste oxidation can be a useful tool in creating a physical model of a closed-loop integrated BTLSS.     

一种测定大值的风速计

简单叙述了研制1种大风速值简易精密测量仪器原理和方法，并对测量误差进行了估算。     

Influence of pre-tension on ballistic impact performance of multi-layer Kevlar 49 woven fabrics for gas turbine engine containment systems

In this paper, ballistic impact tests on wrapped multi-layer Kevlar 49 woven fabric systems were carried out with a flat blade projectile to investigate the impact response during a fan blade out event. The influences of the number of Kevlar layers and pre-tension were discussed particularly. Test results were used to analyze failure modes and energy absorption characteristics of multi-ply Kevlar fabrics. Results show that there are two kinds of impact damage for fabrics: global deformation mainly involving stretching of yarns in the impact region and fabric wrinkle from both sides to the impact zone, and local damage characterized by yarn fracture, yarn pull-out, and yarn unraveling. The energy absorption capability of Kevlar 49 woven fabrics improves with the number of fabric layers. The energy absorbed by multi-layer fabrics increases slightly at the beginning and then decreases substantially with pre-tension. The work in this paper can provide guidance for designing light-weight multi-layer fabrics containment systems.     

DDS中相位截断效应分析及其改善方法

分析了在直接数字频率合成（ＤＤＳ）中引起杂散的相位截断效应,针对其引起的杂散特点讨论了一种通过加入伪随机数改善杂散谱分布的方法,并通过计算机仿真进行了验证。     

直连式喷气发动机试车台试验件进气的联接方式及有关问题

针对直连式喷气发动机试车台稳定段同试验件的联接问题，根据空气流量测量、补氧及推力测量等不同试验目的与要求，讨论了选择联接方案对试验结果的影响。结果认为，模拟总温较高时，音速喷嘴流量测量联接方式应慎重选用；采用能够测量进、出口压力的迷宫密封方式，可以根据喷嘴及回绕式阻隔件流动理论计算出空气泄漏量并可测出压力损失值，从而对试验所要求的补氧量及推力测量提供较准确的修正。     

被动型星载氢钟H型气体电离模型及参数优化

针对被动型星载氢钟气体电离装置低功耗、低电磁干扰的设计要求,设计了一种基于平面盘绕馈能天线的H型电离系统,并建立该电离方法的数学模型。首先,由Maxwell方程出发,推导出了电离泡中的电场和磁场的分布模型,得到气体电离机制;再由电磁场的分布方程推导出氢气击穿判据表达式,建立了气体电离条件的数学模型;最后,利用电离击穿条件判据方程优化了电离装置的设计参数。数值仿真与测试表明该模型是有效的,采用优化的设计参数可以使电离功耗和电磁干扰特性得到改善,且电离直流电源总功率可小于2W。