导流锥结构参数对燃气弹射筒内压力冲击平滑效果影响研究

针对导流锥结构参数对内弹道流场耦合影响问题,基于动态分层动网格技术,构建了含导弹运动和二次燃烧的内弹道数值模型,并验证了模型可靠性。解耦分析了导流锥半径、高度及冲击高度对内弹道流场特性和载荷的影响。结果表明：导流锥的结构直接决定燃气飞溅现象的产生和流场结构的紊乱程度,导流锥的半径、高度和冲击高度的改变会对燃气反射点的位置、二次燃烧的区域以及剧烈程度产生影响;结构优化后的导流锥,较大程度地缓解了冲击现象,获得了较好的平滑效果,筒底压力较实验装置降低了24.5%。     

气相色谱法定量分析氧气中气体杂质方法研究

为寻找一种能够有效检测氧气中微量气体杂质的方法,采用配有氢火焰离子化检测器的气相色谱仪分析氧气中的微量气体杂质,研究了分析氧气中CO、CO₂及C₂H₂等气体杂质的操作参数,确定了氧气中微量气体杂质的分析方法,验证了该方法的可行性,该分析方法各组份分离效果良好,各种杂质组份定量精确度较高。     

Numerical analysis of deflection control of a gas plasma jet based on magnetohydrodynamic staggered electrode configuration

To control the deflection of the gas plasma jet, a new analytical method is proposed based on the Magnetohydrodynamic(MHD) technique. Based on the typical MHD power generation model, the applied voltage is applied to the staggered electrodes, that is, a pair of electrodes on the same side wall are connected to generate an axial current in the channel. Under the action of the magnetic field perpendicular to the direction of the flow, the plasma is subjected to electromagnetic forces perpendicular...     

纳米Sn-Zn-Fe复合氧化物气敏材料的研制

本文采用纳米材料制备技术（共沉淀法）,制备了十二种Ｓｎ－Ｚｎ－Ｆｅ复合氧化物气敏材料,将其制成元件后,进一步测试了气敏性能。结果发现其敏感度比用ＳｎＯ２、ＺｎＯ和Ｆｅ３Ｏ４机械混合制得的烧结元件大为提高,且有较好的选择性。     

喷管分离流流动-热-结构顺序耦合数值模拟及试验研究

针对大膨胀比喷管气流分离状态下喷管所受的复杂载荷,采用数值方法分析喷管结构.利用有限体积二阶迎风插值格式及SST涡耗散湍流模型,结合二层增强型壁面函数,求解N-S方程、热传导方程.采用流固耦合的流动与换热模型,流场与结构温度场互为边界条件交互数据,实现了流场解算与温度场解算的耦合数值分析.应用有限元方法对给定的温度场及压力载荷作用下的结构进行了瞬态静力分析,实现了流动-热-结构的顺序耦合.采用此计算模型对轴对称拉瓦尔喷管进行了数值模拟,发现在大膨胀比下喷管发生气流分离,经分离处的斜激波后气流温度梯度及压力梯度变化较大,导致该区域应力较大.为验证模型的准确性,开展了试验研究,测得的气流分离位置和计算得到的分离位置很好的符合,说明了计算方法的有效性.     

Effect of protrusion amount on gas ingestion of radial rim seal

In this paper, the effect of different amount of protrusion on various parameters in rotor–stator system was experimentally studied by measuring CO₂ concentration and pressure, in order to obtain the optimal protrusion amount. The parameters of different dimensionless sealing flow were measured under the condition that the annulus Reynolds number was 4.39 × 10⁵ and the rotating Reynolds number was 1.05 × 10⁶. The results show that the change of the amount of protrusions has little effect on the static pressure in the cavity, and the static pressure change near the sealing ring is almost negligible. But the total pressure and sealing efficiency increase first and then decrease with the increase of the amount of protrusion. The variation of power consumption is the same. A complex vortex structure will appear at the high radius region when the protrusion is installed. On the other hand, the protrusion can effectively reduce the minimum sealing flow of the rotor–stator cavity. Furthermore, considering the sealing efficiency and power consumption, the best range of the protrusion amount is about 36. The ratio near this range can optimally balance the alleviation of the gas ingestion and the reduction of the power consumption.     

基于3D技术的燃气舵烧蚀率测量方法研究CSCD

针对目前采用的燃气舵烧蚀率测量方法存在误差较大问题,提出了一种基于3D扫描技术的新型测量方法,可以有效提高燃气舵烧蚀率测量准确度,为后续武器型号精确设计奠定基础。     

静压气浮轴承工程设计方法研究

静压气浮轴承是惯性器件测试平台回转支撑轴系的关键部件,其承载能力和回转精度对惯性器件测试的准确性有着重要的影响,目前,静压气浮轴承设计、计算过程复杂,为提高设计效率,简化设计方法,在满足静压气浮轴承性能的条件下,推导了静压气浮轴承工程计算公式,在此基础上,设计了一款双向止推空气轴承,确定了几何参数,计算了空气静压径向轴承、空气静压止推轴承的轴承承载力、刚度、耗气量及摩擦力矩,并与有限元仿真结果进行了对比分析,验证了该设计方法的有效性。     

气相色谱法测定玻璃纤维增强不饱和聚酯树脂塑料中残留苯乙烯单体的含量CSCD

采用气相色谱法火焰离子检测器(FID)测定玻璃纤维增强不饱和聚酯树脂塑料中苯乙烯残留单体含量,用二氯甲烷提取苯乙烯,使用毛细管柱(HP-5),以内标法(正丁苯为内标物)定量,内标法标准曲线线性关系良好,线性相关系数为0.999 7。加样回收率得到满意结果,最低检测限可达5mg/kg。     

光纤氢传感技术的研究现状及其应用前景

分析了光纤氢传感技术发展的现状和特点，比较了几种典型光纤氢传感器的结构和工作原理。指出了光纤氢传感技术是测量易爆环境下氢气浓度的有效方法，并对光纤氢传感技术的应用前景和有待解决的问题进行了讨论。