Characterizing bedrock lithologies using Small Crater Rims and Ejecta Probing (SCREP)

This paper describes the rationale, methodology, and importance of focusing on the rim and proximal ejecta of small (<5 km in diameter), immature impact craters to explore an underlying crustal lithology. Small Crater Rim and Ejecta Probing (SCREP) describes a methodology and application program that extracts bedrock spectral and compositional information from a remote sensing image. Extracted data can yield the pristine lithologies of a planetary crust that would otherwise be obscured by the products of space weathering processes. SCREP was developed with lunar data, specifically Clementine multispectral image mosaics, therefore the technique is discussed in this context. However, its application to other airless solar system bodies is apparent. Knowledge of the pristine bedrock compositions of a planetary crust provides insight into geological surface processes, which can be used to refine models of planetary interiors and their evolution.     

Switching and performance variations of on-orbit BDS satellite clocks

The information of the satellite clock switching and performance variations on-orbit of Chinese BeiDou-2 Navigation System (BDS) is not available for the public. In order to detect the BDS satellite clock switching and performances variation, we analyzed the precise clock offset products with a total duration of 5?years every BDS satellite equipped four atomic clocks from four different manufactures from January 2013 to October 2017. Three important contributions are concluded as follows. (1) It is found that the average time of on-orbit operation for BDS satellite clocks is about 1–2?years. There have been 22 times of clock switching for BDS satellites, of which the C05 and C08 satellites have been switched to the fourth (last) atomic clock. (2) There are frequent phase adjustments for BDS on-orbit satellite clocks, and the frequency series is relatively stable. Furthermore, there are semi-annual sinusoid cycles in the frequency drift series of C06 and C09 satellites. (3) The performances of MEO satellite clocks perform better than the IGSO and GEO satellite clocks. The average ten-thousand frequency stability of BDS satellite clocks is about 1E-13, which is worse than that of GPS and Galileo but better than that of GLONASS.     

Model of a fluxtube with a twisted magnetic field in the stratified solar atmosphere

We build a single vertical straight magnetic fluxtube spanning the solar photosphere and the transition region which does not expand with height. We assume that the fluxtube containing twisted magnetic fields is in magnetohydrostatic equilibrium within a realistic stratified atmosphere subject to solar gravity. Incorporating specific forms of current density and gas pressure in the Grad–Shafranov equation, we solve the magnetic flux function, and find it to be separable with a Coulomb wave function in radial direction while the vertical part of the solution decreases exponentially. We employ improved fluxtube boundary conditions and take a realistic ambient external pressure for the photosphere to transition region, to derive a family of solutions for reasonable values of the fluxtube radius and magnetic field strength at the base of the axis that are the free parameters in our model. We find that our model estimates are consistent with the magnetic field strength and the radii of Magnetic bright points (MBPs) as estimated from observations. We also derive thermodynamic quantities inside the fluxtube.     

Modified unscented Kalman filtering and its application in autonomous satellite navigation

In this paper, a modified unscented Kalman filter (UKF) for nonlinear stochastic systems is proposed, and it is applied to autonomous orbit determination for Earth satellites. Based on some standard results about the boundedness of stochastic processes and a new formulation of the unscented transformation (UT), it is demonstrated that the design of the noise covariance matrix plays an important role in enhancing the filter stability. Furthermore, a particular design of the noise covariance matrix is proposed as a modification of the UKF. The modified UKF is less sensitive to the initial error than the usual one. High performance of the modified UKF is illustrated in comparison with the usual one by using the real data obtained from an Earth sensor.     

CFD simulation of helicopter rotor flow based on unsteady actuator disk model

Actuator Disks (AD) can provide characterizations of rotor wakes while reducing computational expense associated with modeling the fully resolved blades. This work presents an unsteady actuator disk method based on surface circulation distribution combined with empirical data, blade element theory and rotor momentum theory. The nonuniform circulation distribution accounts for 3D blade load effects, and in particular, tip loses. Numerical simulations were conducted for the isolated pressure sensitive paint model rotor blade in hover and forward flight using the HMB3 CFD solver of Glasgow University. Validation of CFD results in comparison with published numerical data was performed in hover, for a range of blade pitch angles using fully turbulent flow and the k-ω SST model. In forward flight, the vortex structures predicted using the unsteady actuator disk model showed configurations similar to the ones obtained using fully resolved rotor blades. Despite the reduced grid cells number, the CFD results for AD models captured well the main vortical structures around the rotor disk in comparison to the fully resolved cases.     

Connection between winter mesopause region temperatures and diurnal LF reflection height variations measured at Collm

Scale height, H, estimates are calculated from the decrease/increase of ionospheric virtual reflection heights of low-frequency (LF) radio waves at oblique incidence in suitably defined morning intervals around sunrise during winter months. The day-to-day variations of H qualitatively agree with daily mean temperature variations around 90 km from meteor radar measurements. Since mesospheric long-period temperature variations are generally accepted to be the signature of atmospheric planetary waves, this shows that LF reflection height measurements can be used for monitoring the dynamics of the upper middle atmosphere. The long-term variations of monthly mean H estimates have also been analysed. There is no significant trend, which is in agreement with other measurements of mesopause region temperature trends.     

基于THz大气窗口的金星地表遥感研究

文章以金星快车VIRTIS载荷相关数据为出发点,验证金星大气模型相适应参数及其窗口。并通过模型参数中的THz频谱分布,阐述实现金星地表遥感探测科学目标的THz相适应理论基础,并提出多功能金星遥感构想。     

SiCP/Al复合材料棱镜组件研磨工艺方法研究

通过对SiCp/Al复合材料棱镜组件研磨工艺试验及其结果分析,总结、优化了研磨工艺参数、研磨砂种类、粒度、研磨时间、研磨工艺过程等参数,研磨出的棱镜组件符合其精度要求,为棱镜组件在平台上的安装精度提供了基础.     

Simultaneous determination of aerosol- and surface characteristics from top-of-atmosphere reflectance using MERIS on board of ENVISAT

The determination of aerosol optical thickness (AOT) from nadir scanning multi-spectral radiometers, like SeaWiFS, MERIS or MODIS, requires the separation of spectral atmospheric and surface properties. Since SeaWiFS and MERIS do not provide information at 2.1 μm, like MODIS, the estimation of the surface reflectance cannot be made by the cross correlation approach described by Kaufman et al., 1997. The BAER approach (Bremen AErosol Retrieval), von Hoyningen-Huene et al., 2003, uses a linear mixing model of spectra for ‘green vegetation’ and ‘bare soil’, tuned by the NDVI, determining an apparent surface to enable this separation of aerosol and surface properties from VIS and NIR channels. Thus AOT can be derived over a wide range of land surfaces for wavelengths <0.67 μm. Using MERIS L1 data over Europe, the AOT retrieved is comparable with ground-based observations, provided by AERONET. Regional variation of AOT can be observed, showing the atmospheric variability for clear sky conditions by: large scale variation of aerosol turbidity, regional pollution, urban regions, effects of contrails and cases of aerosol-cloud interaction. Simultaneously with the spectral AOT also spectral surface reflectance is obtained, where all atmospheric influences have been considered (molecules, aerosols and absorbing gases (O₃)) for channels with wavelengths <0.67 μm. The AOT is extrapolated by Angström power law to NIR channels and the atmospheric correction for land surface properties is performed, enabling the further investigation of land use and spectral land properties.     

Surface integrity and fatigue behavior when turning γ-TiAl alloy with optimized PVD-coated carbide inserts

This paper presents a comprehensive investigation on the effects of tool and turning parameters on surface integrity and fatigue behavior in turning c-Ti Al alloy. The wear of inserts surface, cutting forces, and surface roughness were studied to optimize PVD-coated carbide inserts.Surface topography, residual stresses, microhardness, and microstructure were analyzed to characterize the surfaces layer under different turning parameters. Surface integrity and fatigue life tests of c-Ti Al alloy were conducted under turning and turning-polishing processes. The results show that compared to CNMG120412-MF4, CNMG120408-SM is more suitable because it obtained low cutting force, surface roughness, and tool wear. With increasing the cutting speed and depth, the depths of the compressive residual stress layer, hardening layer, and plastic deformation layer increased. For turning and turning-polishing specimens, the compressive residual stress was relaxed by less than 20%–30% after 10~7 cycles. The fatigue life of a turning-polishing specimen with R_a= 0.15 mm has increased 3 times from that of a turning specimen with R_a= 0.43 mm.