A method of multi-objective reliability tolerance design for electronic circuits

Tolerance design plays an important role in reliability design for electronic circuits. The traditional method only focuses on the consistency of output response. It is not able to meet the needs of increasing development of electronic products. This paper researches the state of related fields and proposes a method of multi-objective reliability tolerance design. The characteristics of output response and operating stresses on critical components are both defined as design objectives. Critical components and their operating stresses are determined by failure mode and effect analysis (FMEA) and fault tree analysis (FTA). Sensitivity analysis is carried out to determine sensitive parameters that affect the design objectives significantly. Monte Carlo and worst-case analysis are utilized to explore the tolerance levels of sensitive parameters. Design of experiment and regression analysis are applied in this method. The optimal tolerance levels are selected in accord with a quality-cost model to improve consistency of output response and reduce failure rates of critical components synchronously. The application in light-emitting diode (LED) drivers indicates details and potential. It shows that the proposed method provides a more effective way to improve performance and reliability of electronic circuits.     

Characteristics of field line resonance type geomagnetic pulsations and variations of plasmaspheric plasma density distribution

The period of field line resonance (FLR) type geomagnetic pulsations depends on the length of the field line and on the plasma density in the inner magnetosphere (plasmasphere), where field lines are closed. Here as FLR period, the period belonging to the maximum occurrence frequency of the occurrence frequency spectrum (equivalent resonance curve) of pulsations has been considered. The resonance system may be replaced by an equivalent resonant circuit. The plasma density would correspond to the ohmic load. The plasma in the plasmasphere originates from the ionosphere, thus FLR period, occurrence frequency are also affected by the maximum electron density in the ionosphere. The FLR period has shown an enhancement with increasing F region electron density, while the occurrence frequency indicated diminishing trend (possible damping effect). Thus, the increased plasma density may be the cause of the decreased occurrence of FLR type pulsations in the winter months of solar activity maximum years (winter anomaly).     

可展桁架天线形面精度理论分析

针对可展桁架天线杆件多和转动铰多的特点, 研究杆件加工公差和转动铰间隙对天线反射面精度和重复展开精度的影响. 根据杆件加工公差和转动铰间隙发生的随机性, 建立相应的随机数据模型和Monte-Carlo随机有限元模型, 计算杆件加工公差和转动铰间隙所引起的天线反射面精度误差. 研究表明, 间隙所引起的反射面精度误差远大于杆件公差所引起的误差, 并且天线重复展开精度差值不宜忽视.      

Equatorial F-region vertical ion drifts during quiet solar maximum

Median values of ionosonde h′F data acquired at Ibadan (Geographic:7.4°N, 3.9°E, Magnetic: dip 6°S, and magnetic declination, 3°W), Nigeria, West Africa, have been used to determine vertical ion drift (electric field) characteristics in the postsunset ionosphere in the African region during a time of high solar activity (average F_10.7 −208). The database spans from January and December 1958 during the era of International Geophysical Year (IGY) for geomagnetic quiet conditions. Bimonthly averaged diurnal variations patterns are very similar, but differ significantly in magnitude and in the evening reversal times. Also, monthly variations of F-region vertical ion drift reversal times inferred from the time of h′F maximum indicates early reversal during equinoxes and December solstice months except for the month of April. Late reversal is observed during the June solstice months. The equatorial evening prereversal enhancement in vertical ion drift (V_zp) occurs largely near 1900 LT with typical values 20–45 m/s. Comparison of Ibadan ionosonde V_zp with the values of prereversal peak velocity reported for Jicamarca (South America), Kodaikanal (India), and Scherliess and Fejer global model show considerable disparity. The changes of postsunset peak in virtual height of F-layer (h′F_P) with prereversal velocity peak V_zp are anti-correlated. Investigation of solar effects on monthly values of V_zp and h′F_P revealed that these parameters are independent of monthly averaged solar flux intensity during quiet-time sunspot maximum conditions.     

基于过渡区的序列图像运动目标分割方法

序列图像运动目标检测技术是目标搜索与跟踪系统的一项核心技术.提出了一种基于过渡区的序列图像运动目标分割方法,该方法通过提取序列图像过渡区来进行目标分割,并与传统的阈值分割算法进行效果比较.实验结果表明,该方法能取得更好的序列图像运动目标分割效果.     

东北主体功能区绩效评价体系的构建

根据<国民经济和社会发展第十一个五年规划纲要>并结合东北实际,针对划分的优化开发、重点开发、限制开发和禁止开发四类主体功能区,按照全面性、科学性、针对性和可操作性的原则,初步设计了一套差别化的区域绩效评价体系的设计思路和评价指标.     

基于线性稳定性理论的转捩控制试验

 使用线化稳定性理论研究了某后掠机翼试验模型在风洞试验条件下可能的试验结果。在当前试验条件下,三维边界层中横流驻波的不同波长扰动发展趋势不同,根据理论分析和数值计算给出了最大放大率波长为4.0 mm。通过升华法试验验证了理论分析与数值计算结果。在试验中使用丝网印刷技术在后掠机翼前缘添加粗糙带,成功地引入了理论计算的最大放大率波长。根据预期影响了三维边界层的转捩。     

两飞行器间无线数据链通信区域建模

为实现两飞行器在飞行过程中的正常通信,需建立一套通信区域的计算模型.基于空地无线数据链通信,从其实现正常通信的条件出发,考虑通信链路中的发射机、接收机、收发天线、传输空间及地球曲率、飞行器姿态角以及飞行器的空间位置关系等因素,分析研究了飞行器间无线数据链通信区域,建立了两飞行器间无线数据链通信区域的数学模型,包括天线、飞行高度、两飞行器空间位置关系、通信区域模型等.该模型已成功应用于某型号,为分析建立在无线数据链通信方式基础上的空地无线传输系统通信区域提供了参考,也适用于飞船、卫星等其它空空、空地无线数据通信系统.     

加强政策支持体系建设促进中部劳动力转移

在我国劳动力市场供求形势发生变化的新时期,进一步促进农村劳动力转移,中部地区既要靠继续加快工业化、城市化进程,为农村富余劳动力转移提供更多的就业岗位,更要依赖国家宏观政策的调整与经济社会管理体制的改革,建立和完善全国统一的劳动力市场体系和相应的政策支持体系。具体包括：（1）把统筹城乡就业放到经济发展战略的核心位置,促进中部农村劳动力转移;（2）创新就业制度,建立城乡统一就业、规范有序的劳动力市场;（3）深化户籍制度和土地制度改革,为农村劳动力转移就业创造良好的制度环境;（4）推行农村四项保障制度,使农村社保制度与城市社保制度逐步对接;（5）加强农村教育和培训工作,提高农村劳动力素质;（6）积极培育农村新型社会化服务组织,促进农村服务业的发展。     

利用反射式衍射光栅进行瞬态应变测量

介绍了利用反射式衍射光栅进行瞬态应变测量的方法,在一维细长杆中,通过测量杆未端的绝对速度,就可以算出动态应变和应变灵敏度系数K,文章对该方法进行了理论计算和实验结果分析,给出了结论和进一步研究方向。