柱塞泵热力学建模与仿真

针对航空行业广泛应用的柱塞泵的热力学特性,提出了一种分析和建模的方法.应用能量守恒定律推导并建立了集中参数的航空柱塞泵的热力学模型,并针对柱塞泵的内部结构进行了较详细的传热分析.将此建模和分析的方法应用于包含航空柱塞泵的一个典型液压回路.通过对航空柱塞泵的热力学实验与仿真结果的比较证明了建模方法的有效性.     

软开关组合式变换器建模与校正

针对电流控制离散脉冲调制方式下的一种软开关组合式变换器,借助于时域仿真和付里叶变换建立系统频域模型（频率特性曲线）,并在此基础上导出等效解析模型,为软开关组合式变换器系统性能分析提供了一种方便可行的方法,特别是解决了其电压调节器设计盲目性的问题。并给出了电压调节器设计及系统性能分析实例。     

Wave disturbance influence on HF-propagation characteristics

This work studies the variations of HF characteristics and ionospheric parameters recorded over mid-latitude paths in the Russian East-Siberian region during magnetic storms on May 15, 1997, and September 24, 2006. The sharp wave-like changes in maximum observed frequencies (MOF) were recorded during the main phase of the investigated storms. Assuming that observed MOF variations can be produced by ionospheric disturbances propagating from the northern to the southern latitudes, a simulation of HF propagation conditions was carried out.     

COST 296 action results for space weather ionospheric monitoring and modelling

COST 296 Action refers to the project on Mitigation of Ionospheric Effects on Radio Systems (MIERS) in the framework of European Cooperation in Science and Technology (COST), which is one of the longest-running European instruments supporting cooperation among scientists and researchers across Europe. The main objective of the MIERS project has been to develop an increased knowledge of the effects imposed by the ionosphere on practical radio systems, and for the development and implementation of techniques to mitigate the harmful effects of the ionosphere on such systems. This paper highlights COST 296 Action results that have been achieved during its lifetime period of February 2005–February 2009 with emphasis on space weather ionospheric monitoring and modelling.     

An inverse strategy to determine constitutive parameters of tubular materials for hydroforming processes

This paper is to determine the flow stress curve of 5049-O aluminium alloy by a tube hydraulic bulging test with fixed end-conditions. During this test, several tubular specimens are bulged under different internal pressures before their bursting, and the corresponding bulging height and wall thickness at the pole are measured. An inverse strategy is developed to determine the constitutive parameters of tubular materials based on experimental data, which combines the finite element method with g...     

软件工程方法在飞行仿真系统开发中的应用

针对飞行仿真系统开发中存在的问题，通过对飞行系统模型及仿真系统的具体分析，引入软件工程方法，结合仿真软件系统的特点，在仿真系统开发模式，仿真软件设计方法，软件的质量管理方法三方面进行了研究，在面向对象模型的基础上，发展了一套完整的仿真系统开发模式，提出了仿真系统的对象建模方法，仿真系统的软件编码原则和质量管理方法。     

有关鲁棒状态估计的研究评述

研究了有关带模型误差系统的鲁棒状态估计问题。详细讨论了模型误差对滤波器性能的影响,并简单介绍了几种鲁棒状态估计方案。最后指出了将来可能的研究方向。     

丁羟弹性体溶胶表征方法研究

提出了ＨＴＰＢ－ＴＤＩ（ＩＰＤＩ）弹性体（丁羟弹性体）溶胶的表征项目及其分析测试方法，研究了诸表征参数值与弹性体实验条件间的相关规律，给出了丁羟弹性体溶胶的基本组成和结构。     

直升机模拟器鉴定标准的分析

重点介绍了美国AC 120-63直升机模拟器鉴定标准的演变过程.通过现行标准与过去直升机模拟器标准（草稿）的一些对比,阐述了现行直升机模拟器标准的一些特点及今后模拟器标准的发展趋势,并对所要求的标准、试验项目、等级划分、容差以及注意事项等方面的问题进行了对比和分析.所讨论的内容涉及直升机模拟器鉴定标准的各个方面,包括视景系统、运动系统、数据及其他要求,可为国内直升机模拟器的研制以及相应规范的制定提供参考.     

不平路面上汽车制动过程建模与仿真分析

建立了汽车在不平路面上制动过程的动力学模型,提出了反映路谱对车轮制动影响的非线性时变轮胎力学模型,仿真计算了BJ-212汽车在随机路面上的制动过程,通过分析说明路面不平度对车辆制动性能存在显著的影响,得出了路面不平度增大时,汽车的制动距离增长,制动加速度减小等有价值的结论。