泵压式上面级发动机性能精度干扰因素研究

性能精度是液体火箭发动机的一项重要指标,对于上面级发动机性能精度尤其重要.以某型泵压式上面级发动机为研究对象,利用影响分析树的方法识别了发动机生产、测试、性能调整过程中影响性能精度的干扰因素;针对所识别的干扰因素,通过仿真计算,得到了其偏差对发动机推力和混合比的影响.根据统计学原理,推导得到多项干扰因素影响概率的计算模型,并利用小子样样本对计算模型和程序的正确性进行了验证.利用该概率计算模型,根据置信水平要求,确定了多项干扰因素对发动机性能的极限偏差影响.根据发动机性能精度要求,分解得到了单个干扰因素的控制目标.     

考虑燃料均衡的卫星编队队形重构技术

在卫星编队队形重构过程中,如何在实现编队整体燃料消耗较少的同时使得各子卫星燃料消耗均衡,能够有效地提高卫星编队整体的寿命。提出了一种基于虚拟中心位置可变的卫星编队队形重构新方法。该方法以虚拟中心位置为寻优变量,以首末脉冲时刻可优化的双脉冲规划作为单星轨道机动策略,将编队队形重构问题转化为混合0-1数学规划问题。仿真结果表明,该优化算法在实现整体燃料次优的同时,兼顾了各星当前的燃料剩余水平,实现了各子卫星的燃料均衡。     

级间热分离条件下带有延伸喷管的固体火箭发动机尾部流场分析

通过数值方法求解二维轴对称N-S方程,对级间热分离条件下带有延伸喷管的固体火箭发动机尾部流场进行了数值分析。分析表明,展开前,受限尾流使延伸锥、发动机后封头及基础喷管外壁处于严重的热环境中;展开过程中,尾流作用在延伸锥上的气动力变化剧烈。计算结果对发动机的热防护设计及展开机构的驱动力设计提供了依据。     

高效空间应用燃料电池热能利用技术研究

首先介绍了空间应用燃料电池高效散热及温控技术。高精度控温主要是利用被动散热技术,将产生的热量快速传导至外部冷却介质,从而保证产热面的温度均匀性,实现电池稳定工作。通过嵌入式被动散热和双端散热的冷却方式,实现电堆内部最大温差小于5℃,换热系数达1000W/(m·K)。     

火箭返回制导动力着陆段的自适应启动方法

针对重复使用火箭垂直返回着陆问题,提出了一种燃料最优的动力着陆段自适应启动方法。首先,将燃料最优启动点对应的动力着陆轨迹的推力剖面和攻角剖面描述为解析的形式,该解析形式中攻角剖面由状态量唯一确定,推力剖面仅含一个待定参数。随后,通过预测具有上述解析剖面形式的轨迹判断是否启动动力着陆。计算中引入松弛终端位置约束的策略求解推力剖面待定参数,由终端位置约束判断是否满足燃料最优启动条件。上述策略将燃料最优启动条件的判断问题简化为单一变量求解问题,实现了该问题的快速求解。仿真结果表明,该方法得到的启动点与数值优化方法得到的燃料最优启动点接近,且求解过程稳定、计算效率高。     

基于MATLAB/Simulink的飞机燃油箱内燃油温度仿真计算

燃油温度是飞机燃油箱可燃性评估的关键参数之一。为了研究飞机燃油箱内温度的分布规律及传热模型的正确性,采用MATLAB/Simulink软件平台搭建出了客机的燃油箱热仿真模型。在输入飞行实验所对应的的边界条件后,通过数值模拟获得燃油箱内部各计算节点处的燃油温度。结果表明,在三种不同的航行条件下,燃油箱热模型仿真结果均能较好地与飞行实验结果吻合,能够将计算误差控制在一定范围内。采用该燃油箱热模型进行热仿真数值模拟可以获得较为准确的飞机燃油箱热特性,能够在飞机设计阶段,用于对燃油箱结构以及内热源部件布置的优化。     

民用飞机不同商载配置对机身着陆载荷的影响分析

重量分布和重心位置是影响起落架和机体地面载荷的重要因素,其中商载是影响全机重心、惯量的最活跃因素。飞机实际运营中,有无穷多种商载分布及装载方案。为了确保机身载荷分析时,不遗漏严重设计情况,同时能大大减少载荷人员的工作量,本文对不同商载配置下的机身着陆载荷进行了研究分析,分析结果表明最大商载情况将构成机身垂直剪力和垂直弯矩的严重情况。因此,在进行机身载荷分析时,必须考虑最大商载情况,而最大燃油情况可以不必考虑。这一结论为今后有针对性的开展民机机身载荷分析提供了数据支持。     

固体发动机喷管延伸锥展开前级间分离的热环境分析

通过FLUENT流场计算软件,采用RNGK k-ε湍流模型,针对带有延伸喷管的多级固体发动机级间热分离的热环境进行了数值分析。研究表明,延伸喷管尾流受到连接筒、前封头、延伸段的阻碍后,其流动特征变化显著,尤其在一级前封头的影响下形成回流,并在喷管内形成激波。计算得到的热环境参数,对发动机的热防护设计具有一定的参考价值。     

Numerical investigation of flow mechanisms of tandem impeller inside a centrifugal compressor

This study numerically investigated a single stage centrifugal compressor ‘‘Radiver’’ with a wedge diffuser and several tandem-designed impellers to explore the flow phenomena within the tandem impeller and the potential to enhance compressor performance. The results demonstrate that tandem design and clocking fraction (λ_s) significantly affects the compressor performance. The compressor stage with tandem impellers of Series A of boundary layer growth interruption alone are observed to have a widely operating range but efficiency and total pressure ratio penalty compared with that of conventional impeller. The tandem impeller with at least the same impeller efficiency as the conventional design is considered as a critical design criteria so that further modification process based on the flow characteristic of tandem impeller is necessary. In order to restrain the inducer wake and exducer shock losses, parameters modification of blade angle and thickness distributions are necessary and the modified tandem impeller of Series B is obtained. The modified tandem impeller with 25% clocking arrangement shows an 8.45% stall margin increase and maintains the total pressure ratio and efficiency as the conventional design, which proves the potential of tandem impeller to improve compressor stage performance. It is noteworthy that the tandem impellers of Radiver have not shown obviously balanced exit flow field and the fundamental mechanism of stall margin extending of tandem impeller lies on the improved impeller/diffuser matching performance resulting from the incidence angle variation at diffuser inlet.     

SAR performance-based fault diagnosis for electro-hydraulic control system: A novel FDI framework for closed-loop system

Model-based fault diagnosis serves as an efficient and powerful technique in addressing fault detection and isolation (FDI) issues for control systems. However, the standard methods and their modifications still encounter some difficulties in algorithm design and application for complex higher-order systems. To avoid these difficulties, a novel fault diagnosis framework based on multiple performance indicators of closed-loop control system is proposed. Under this framework, a so-called performance residual vector is constructed to measure the differences between the real system and the nominal model in terms of system stability, accuracy, and rapidity (SAR) respectively. The criteria for quantification, normalization of the SAR residuals and the explicit mappings between the thresholds and the required performance are given. FDI can be easily achieved simultaneously by monitoring the normalized residual vector length and direction in the SAR performance residual space. A case study on electro-hydraulic servo control system of turbofan engine is adopted to demonstrate the effectiveness of the proposed method.