带增压压气机的小型脉冲爆震涡轴发动机性能分析

为了解决小型涡轴发动机采用脉冲爆震燃烧室代替主燃烧室时,由于脉冲爆震燃烧室的增压作用,无法从压气机出口引气对燃气涡轮冷却、封严的问题,提出了一种带增压压气机的脉冲爆震涡轴发动机(PDTSE)构型,并建立了相应的性能分析方法。对常规涡轴发动机与带增压压气机的PDTSE性能进行对比研究,计算结果表明：与常规涡轴发动机相比,带增压压气机PDTSE性能具有较大优势;在整个设计域内,综合考虑性能指标和设计难度,在循环最优处,带增压压气机的PDTSE相比普通涡轴的热循环效率高14.5%,耗油率低9.7%,单位功率高27%。     

ZnO/SBA-15无机热控涂层填料及涂层性能

开展高紫外-可见-近红外反射能力热控填料的制备,研制新型低吸收比(α_S)高发射率(ε_H)无机热控涂层。以自制SBA-15和ZnO前驱体为原料通过溶剂热浸渍和高温煅烧法制备ZnO/SBA-15填料,然后与硅酸钾(K_2SiO_3)制备无机热控涂层;采用SAXD、XRD、SEM、太阳反射光谱分析填料和涂层的性能。结果显示采用硝酸锌作为前驱体、m(ZnO)∶m(SBA-15)=3∶7、950℃下烧结3 h可以得到高紫外-可见-近红外反射能力的填料;ZnO/SBA-15/K_2SiO_3无机涂层的α_S为0.09,ε_H为0.91,涂层结合力等级为1级,经过100次-196～100℃热循环实验后,涂层无脱落和开裂现象。SBA-15改性ZnO可以获得具有高紫外反射率和低α_S的热控填料,ZnO/SBA-15填料制备的无机热控涂层同样具备高紫外反射率、低α_S和高ε_H,可以满足航天器高效散热的需求,应用前景良好。     

Design and optimization of a novel electrically controlled high pressure fuel injection system for heavy fuel aircraft piston engine

The heavy fuel compression ignition engines are widely equipped as aircraft piston engines. The fuel injection system is one of the key technologies that determines the performance of engine. One of the main challenges is to precisely control the injected fuel quantity and flow rate in the presence of pressure fluctuation. This challenge is even more serious for heavy fuel. An original design for electrically controlled high pressure fuel injection system called Multi-Pumppressure-reservoirs fuel injection System(MPS) was demonstrated to reduce the pressure fluctuation and help keep injection stable. MPS was compared with an ordinary high pressure Common Rail fuel injection System(CRS). This work established one-dimensional AMESim and mathematical models for both CRS and MPS to study the effect of different structures and geometric parameters on the pressure fluctuations. The calculations show that the average fuel pressure fluctuation of MPS can be reduced by 57% for the crankshaft speed of 1900 r/min, and the pressure fluctuation before injection reduced by 100%. It is concluded that the pressure performance of MPS is less sensitive to pressure reservoir volume than that of CRS, and there is an opportunity for further volume reduction.     

基于小位移旋量的旋翼系统公差建模及分析

直升机的振动问题与加工制造技术紧密相关,降低制造误差可有效减小直升机的振动。为了分析直升机旋翼系统的几何回转精度,基于小位移旋量对零部件装配路径上的关键公差进行建模,通过齐次坐标变换方法对闭环链路上的误差传递进行分析,得到旋翼系统几何回转精度模型;在此基础上,与蒙特卡洛仿真相结合,对旋翼系统的实例模型进行分析。结果表明：旋翼桨叶根部在空间内的变动范围近似呈椭球形变化,在旋转过程中存在复杂的波动情况,桨叶根部在桨盘平面内的径向波动误差约为 0.58%,在垂直桨盘平面方向的波动相对较大,约为 0.89%。     

Operational modal parameter identification with colored noise excitation

Operational Modal Analysis (OMA) refers to the modal analysis of a structure in its operating state. The advantage of OMA is that only the output vibration signal of a system is used in the analysis process. Classic OMA is based on the white noise excitation assumption and many identification methods have been developed in both time domain and frequency domain. But in reality, many environmental excitations are not compliance with the white noise assumption. In this paper, a method of half power bandwidth analysis is applied to power spectrum analysis to deal with the colored noise and trapezoidal spectral excitation. The modal frequencies and modal damping ratios are derived and the error caused by trapezoidal spectral and colored noise excitation are analyzed. It is proved that the OMA algorithm based on the white noise assumption can be extended to the colored noise environments under certain conditions. Finally, a simulation example with a cantilever beam and a vibration test with four kinds of colored noise and trapezoidal spectrum base excitation are carried out and the results support the proposed method.     

含金属相变材料温控组件的研究

研究使用一种含有金属相变材料（Phase Change material,PCM）的温控组件（Thermal Control Component,TCC）对航天器上的有效载荷进行温度控制。通过对载荷的温控需求分析,设计并制备了以Ga-Sn合金为PCM的TCC,并通过地面模拟实验对TCC的温控性能进行测试。实验结果表明这种含有Ga-Sn合金的TCC满足载荷的温控需求。最后在仿真软件中建立了TCC的相变传热仿真模型用于预测TCC的温控性能。结果表明：仿真模型计算所得结果与实验结果基本一致,可用于预测TCC的温控性能。     

New trade tree for manned mars missions

Recent studies on human missions to Mars suggest revisiting the parameters that have the most important impact on the complexity, the initial mass in low Earth orbit, the risks and the development costs for the first journey to the red planet. In the last NASA reference mission, a trade tree is proposed.     

Experimental study of a flush wall scramjet combustor equipped with strut/wall fuel injection

In this study a flush wall scramjet combustor is tested in a supersonic incoming air flow with the Mach number of 3 which is generated by an air vitiation heater producing the stagnation temperature of 1505 K. Using liquid kerosene as the fuel, the flame is stabilized by means of a centrally mounted O₂ pilot strut after being ignited by a plasma torch. During experimental measurements, the fuel is injected with a constant equivalence ratio of 0.8 according to specified strut/wall injection ratios, i.e., a portion of the fuel amount is injected from the strut while the rest is injected from the wall. The strut and wall injectors are arranged at the same axial position. The combustion performance and wall temperature gradients are evaluated with various fuel feeding ratios between the wall and the strut. Experimental results show, when the equivalence ratio is constant and the axial injection position is fixed, the combustion characteristics vary significantly with the strut/wall fuel feeding ratio, especially when this ratio is close to its lowest and highest limits. Among the four fuel feeding ratios examined, the strut only injection mode and the average distributed strut/wall injection mode show the best combustion performance. However, the strut/wall injection mode produces a smaller wall temperature gradient compared to the strut only injection mode, which is due to the significant film cooling effect caused by the wall injected liquid kerosene.     

Determination of land surface temperature using precipitable water based Split-Window and Artificial Neural Network in Turkey

Land surface temperature (LST) calculation utilizing satellite thermal images is very difficult due to the great temporal variance of atmospheric water vapor in the atmosphere which strongly affects the thermal radiance incoming to satellite sensors. In this study, Split-Window (SW) and Radial Basis Function (RBF) methods were utilized for prediction of LST using precipitable water for Turkey. Coll 94 Split-Window algorithm was modified using regional precipitable water values estimated from upper-air Radiosond observations for the years 1990–2007 and Local Split-Window (LSW) algorithms were generated for the study area. Using local algorithms and Advanced Very High Resolution Radiometer (AVHRR) data, monthly mean daily sum LST values were calculated. In RBF method latitude, longitude, altitude, surface emissivity, sun shine duration and precipitable water values were used as input variables of the structure. Correlation coefficients between estimated and measured LST values were obtained as 99.23% (for RBF) and 94.48% (for LSW) at 00:00 UTC and 92.77% (for RBF) and 89.98% (for LSW) at 12:00 UTC. These meaningful statistical results suggest that RBF and LSW methods could be used for LST calculation.     

Ka频段卫星通信雨衰分析及解决对策

Ka频段卫星通信中,降雨引起的信号衰减对通信链路的通断起着非常重要的作用.本文在阐述雨衰原理的基础上,分析了Ka频段雨衰对信道特性的影响,提出了Ka频段抗雨衰的各种对策,并通过实例说明了对策的有效性.