基于FPGA的高准确度数字频率信号源设计

介绍了直接数字频率合成技术的实现方法,分析了其优越的技术特性。根据其特性,利用FPGA设计了高准确度的数字频率信号源。仿真结果表明,与传统的信号源相比,使用该方法实现的信号源,其信号种类多,准确度高,满足测试设备数字化、软件化的趋势。     

实测载荷谱数据处理系统

简要介绍了实测载荷谱数据处理系统，较深入地论述了实测载荷谱数据处理的几个重要方面，给出了该系统处理直升机旋翼系统动部件实测载荷谱的实例，通过大子样二维疲劳２载荷母体分布参数估计及假设检验，发现载荷幅值服从半正态分布，载荷均值服从三参数Ｗｅｉｂｕｌｌ分布。     

Time-series analysis of GPS measurements for long-span bridge movements using wavelet and model prediction techniques

This study aims at assessing the safety behavior of the Incheon long-span bridge using high rate (10?Hz) geodetic monitoring global positioning system (GPS). The time series of wavelet spectrum analysis is utilized to assess the dynamic behavior of the bridge. The coefficients and model errors of the time series autoregressive-moving average (ARMA) model are used to evaluate the movement performances of the bridge. The results show that: (i) the accuracy of GPS measurements to extract the dynamic behavior of the bridge is 97.27% when compared with the design results. (ii) the behavior of the bridge is within the safety limits of the bridge design with minimum observed changes for the historical GPS measurements in time and frequency domains, the mean deflection of bridge deck is 8.26?mm and frequency changes of bridge is 0.004?Hz compared with the design results. (iii) the time series analysis of the wavelet spectrum and ARMA model coefficients can be used to detect the significant frequency changes and study the rigidity of the bridge performance, respectively; and the both methods are found to be suitable techniques to estimate the performance changes of the GPS measurements in the time and frequency domains during the monitoring time period.     

DME脉冲调制信号波形参数对空间频谱占用的影响分析

航空测距器DME的开发、调试和性能验证都要用到高斯双脉冲调制格式的DME信号。由于专用的DME信号模拟器技术复杂、价格昂贵,人们常用具有快沿双脉冲调制功能的模拟信号源替代。本文以航空测距器DME信号要求为依据,初步分析了这种替代可能存在的问题,并通过实验对不同边沿条件下高斯双脉冲、矩形双脉冲调制信号的功率频谱占用情况进行了验证。     

Early analysis of precise orbit and clock offset determination for the satellites of the global BeiDou-3 system

Eight new-generation BeiDou satellites (BeiDou-3) have been launched into Medium Earth Orbit (MEO), allowing for global coverage since March 2018, and they are equipped with new hydrogen atomic clocks and updated rubidium clocks. Firstly, we analyzed the signals for the carrier-to-noise-density ratio (C/N0) and pseudorange multipath (MP) by using international GNSS (Global Navigation Satellite System) Monitoring and Assessment System (iGMAS) station data, and found that B1C has a lower C/N0, and B2a has the same level of C/N0 as the B1I and B3I signals. For pseudorange multipath, compared with the BeiDou-2 satellites, the obvious systematic variation of MP scatters related to the elevation angle is greatly improved for the BeiDou-3 and BeiDou-3e satellites signals. For the signals of the BeiDou-3 satellites, the order of the Root Mean Square (RMS) values of multipath and noise is B3I?<?B1I?<?B2a?<?B1C. Then, the comparison of the precise orbit determination and clock offset determination for the BeiDou-2, BeiDou-3, and BeiDou-3 experimental (BeiDou-3e) satellites was done by using 10 stations from iGMAS. The 3D precision of the 24?h orbit overlap is 24.55, 25.61, and 23.35?cm for the BeiDou-3, BeiDou-3e, and BeiDou-2 satellites, respectively. BeiDou-3 satellite has a comparable precision to that of the BeiDou-2 satellite. For the precision of clock offset estimation, the Standard Deviation (STD) of the BeiDou-3 MEO satellite is 0.350?ns, which is an improvement of 0.042?ns over that of the BeiDou-2 MEO satellite. The stabilities of the BeiDou-3 and BeiDou-3e onboard clocks are better than those of BeiDou-2 by factors of 2.84 and 1.61 at an averaging time of 1000 and 10,000?s, respectively.     

基于ANSYS Workbench的行星滚柱丝杠动态特性分析

通过Pro/Engineer建立行星滚柱丝杠三维模型，基于ANSYS Workbench有限元分析技术进行模态与谐响应分析，得到前六阶固有频率与各阶模态振型，确定共振频率，掌握对应频率下的位移峰值响应，并研究螺母处于不同工作位置时对固有频率的影响，为基于行星滚柱丝杠传动的舵系统抗振设计提供数据支撑。     

无源滤波器频率漂移的一种迭代算法

文章介绍了无源滤波器在试验过程中产生的典型幅频特性漂移曲线，并针对这些典型曲线提出了基于均方误差最小原则和牛顿迭代的频率漂移算法。     

无人机高速DS/FH混合扩频通信系统关键模块设计

针对UAV(Unmanned Aerial Vehicle,无人机)测控链路高抗干扰需求,给出了实现跳频速率20 000次/s的扩跳混合无人机测控数据链系统实现方案.系统采用跳频频率并行捕获模式.跳频源设计采用直接频率合成、DDS(Direct Digital Synthesis,直接数字频率合成)和PLL (Phase-Locked Loop,锁相环)相结合的混合频率合成技术.利用相位响应滤波器,通过正交调制技术完成MSK(Minimum Shift Keying,最小频移键控)、GMSK (GaussianMinimum Shift Keying,高斯最小频移键控)调制.通过推导得出2 bit差分解调输出与载波频率选择有关,且为四分之数据率的整数倍关系.然后通过实例分析给出了跳频频率间隔选取方法,即跳频间隔应当将临近跳频的主瓣分开,同时跳频载波频率应当设在其他跳频频谱的零点处.最后总结了高速扩跳频系统参数设计一般步骤.     

原子钟时域频率稳定性计算方法

首先给出时域频率稳定性分析中各种方差的实用计算公式,并在此基础上分析各种方差特性,总结归纳其适用范围。分析表明：①阿仑方差是时域频率稳定性分析中最常用的方法,但不能区分调相白噪声和调相闪变噪声;②改进阿仑方差通过相位平滑运算能识别这2种噪声;③时间方差和时间总方差主要用于描述频率源的时间波动,主要用于分析调相噪声;④当频率漂移项较大或受甚低频噪声影响时,哈达玛系列方差能给出很好的测量特性。     

飞机发动机混沌振动信号盲分离检测方法

发动机混沌振动信号携带着丰富的状态信息,依据混沌振动信号进行状态监测及故障诊断是一种很有前途的技术手段,但由于混沌信号具有伪随机特性及在低频段具有宽频谱等特点,使得传统的方法很难将其从振动信号中分离。在提取混沌振动信号方面,使用快速独立分量分析（Fast ICA）盲分离方法分离出飞机发动机振动信号中的混沌信号。利用功率谱和Lyapunov指数（LE）方法进行了判定,根据计算结果对发动机状态做出判断,验证了盲分离方法分离混沌振动信号的有效。盲分离检测混沌振动信号的方法不仅使依据混沌信号判断飞机发动机状态成为可能,也为利用混沌信号进行状态预测和控制提供了一种方法。