基于神经网络的翼型积冰预测

采用神经网络方法对翼型表面的积冰进行了预测研究.建立了一种型面曲线坐标系,通过坐标变换将积冰外形转化为几何曲线.利用傅立叶级数对此曲线进行拟合,实现积冰外形的参数化.以结冰条件作为输人,冰形参数作为输出构建神经网络,对NACA 0012翼型表面的积冰进行预测.通过将预测结果与实验结果以及数值模拟结果进行对比,说明所提出...     

分数傅立叶变换用于抑制SAR杂波背景检测慢速动目标

慢速运动目标在时、空、频域上都落入主杂波区。利用单通道SAR图像中静止背景的信息抑制静止杂波,可改善检测动目标的性能。分数傅立叶变换是线性变换,不存在交叉项,采用分数傅立叶变换搜索匹配动目标信号,使其能量汇聚。对称计算旋转角正负对称的分数傅立叶变换,在两个对称的分数傅立叶域中得到两个复信号,这两个复信号中静止背景的模处处相同,而包含动目标的区域,模的幅度有很大差别,计算对称的分数傅立叶域信号对应位置模的差,取绝对值,可对消静止背景,敏锐地检测动目标。实测数据表明本算法有效。     

消除数据调制影响的FFT捕获方法

在利用快速傅里叶变换(FFT, Fast Fourier Transform)捕获扩频信号的过程中,为了提高捕获精度,会遇到基带数据调制影响捕获性能的问题.主要分析了基带数据符号跳变影响FFT捕获性能的原因:在频域内造成待检测信号的幅度衰减以及频点偏移.提出了一种解决此问题的方法:通过对I和Q两路信号的运算,构造一个不受数据调制影响的复信号,对此信号作FFT,完成捕获.给出了此方法的MATLAB仿真,以及基于现场可编程门阵列(FPGA, Field Programmable Gate Array)的实现方案.实验数据表明,此方法消除了基带数据调制对FFT捕获性能的影响,且在相等积分时间的条件下,比常用方法的捕获精度提高了一倍.      

基于虚拟慢时间的双基地ISAR成像算法

针对双基地角时变引起的逆合孔径雷达（ISAR）图像畸变和散焦问题，提出了一种基于虚拟慢时间的成像算法。首先，分析了双基地角时变对ISAR成像的影响机理。然后，基于图像对比度最大准则估计等效旋转中心位置，完成初次相位补偿。最后，通过虚拟慢时间构建基于非均匀虚拟采样的补偿系数矩阵，并通过方位向非均匀傅里叶变换得到目标的ISAR像。算法基于图像对比度最大准则解决等效旋转中心位置估计问题，通过虚拟慢时间消除转动相位项的高次项影响，利用非均匀傅里叶变换解决随机虚拟采样的谱估计问题。理论分析和仿真结果验证了算法的有效性和鲁棒性。     

Comparison of convergence time and positioning accuracy among BDS,GPS and BDS/GPS precise point positioning with ambiguity resolution

Precise point positioning (PPP) usually takes about 30?min to obtain centimetre-level accuracy, which greatly limits its application. To address the drawbacks of convergence speed and positioning accuracy, we develop a PPP model with integrated GPS and BDS observations. Based on the method, stations with global coverage are selected to estimate the fractional cycle bias (FCB) of GPS and BDS. The short-term and long-term time series of wide-lane (WL) FCB, and the single day change of narrow-lane (NL) FCB are analysed. It is found that the range of GPS and BDS non-GEO (IGSO and MEO) WL FCB is stable at up to a 30-day-time frame. At times frame of up to 60?days, the stability is reduced a lot. Whether for short-term or long-term, the changes in the BDS GEO WL FCB are large. Moreover, BDS FCB sometimes undergoes a sudden jump. Besides, 17 and 10 stations were used respectively to investigate the convergence speed and positioning errors with six strategies: BDS ambiguity-float PPP (Bfloat), GPS ambiguity-float PPP (Gfloat), BDS/GPS ambiguity-float PPP (BGfloat), BDS ambiguity-fixed PPP (Bfix), GPS ambiguity-fixed (Gfix), and BDS/GPS ambiguity-fixed (BGfix). The average convergence speed of the ambiguity-fixed solution is greatly improved compared with the ambiguity-float solution. In terms of the average convergence time, the Bfloat is the longest and the BGfix is the shortest among these six strategies. Whether for ambiguity-float PPP or ambiguity-fixed PPP, the convergence reduction time in three directions for the combined system is the largest compared with the single BDS. The average RMS value of the Bfix in three directions (easting (E), northing (N), and up (U)) are 2.0?cm, 1.5?cm, and 5.9?cm respectively, while those of the Gfix are 0.8?cm, 0.5?cm, and 1.7?cm. Compared with single system, the BDS/GPS combined ambiguity-fixed system (BGfix) has the fastest convergence speed and the highest accuracy, with average RMS as 0.7?cm, 0.5?cm, and 1.9?cm for the E, N, U components, respectively.     

Fast cooperative trajectory optimization and test verification for close-range satellite formation using Finite Fourier Series method

The process of formation reconfiguration for close-range satellite formation should take into account the risk of collisions between satellites. To this end, this paper presents a method to rapidly generate low-thrust collision-avoidance trajectories in the formation reconfiguration using Finite Fourier Series (FFS). The FFS method can rapidly generate the collision-avoidance three-dimensional trajectory. The results obtained by the FFS method are used as an initial guess in the Gauss Pseudospectral Method (GPM) solver to verify the applicability of the results. Compared with the GPM method, the FFS method needs very little computing time to obtain the results with very little difference in performance index. To verify the effectiveness, the proposed method is tested and validated by a formation control testbed. Three satellite simulators in the testbed are used to simulate two-dimensional satellite formation reconfiguration. The simulation and experimental results show that the FFS method can rapidly generate trajectories and effectively reduce the risk of collision between satellites. This fast trajectory generation method has great significance for on-line, constantly satellite formation reconfiguration.     

复调制ZFFT的TMS320C25实现

介绍了用ＴＭＳ３２０Ｃ２５数字信号处理器实现复调制ＺｏｏｍＦＦＴ（ＺＦＦＴ）频率细化技术，在所举的例子中，用１０２４复数点选带ＦＦＴ获得通常８１９２复数点基带ＦＦＴ的频率分辨力。实验结果表明，此种频率细化方法特别适用于不能同时处理Ｎ点，而又要求Ｎ点ＦＦＴ频率分辨力的频谱分析场合，文中给出了几种提高Ｃ２５ＦＦＴ运算速度的方法，使１０２４复数点ＦＦＴ的运算时间减少到１２．６ｍｓ，可供工程应用参考。     

Schrdinger型方程的一种半隐式差分格式

本文讨论了Schr(?)dinger型方程U_t=iU_(xx)的一类半隐式差分格式,这些格式实际上是可以显式求解的,并给出了它们的稳定性条件。     

脉冲多普勒雷达回波信号数据压缩处理方法

为降低脉冲多普勒雷达测量高速目标时数据处理的难度，在分析目标多普勒频率和回波带宽的基础上，提出对经快速傅里叶变换（FW）后的采集数据进行压缩处理的方法，并阐述了其基本原理。研究表明，利用汉明窗可有效荻取多普勒频率，并在频域上进行数据压缩，既可保留目标的全部信息，又能获得较高的压缩比。     

固体推进剂杆状药柱的动态响应

本文用三参数分数阶导数模型描述了了固体推进剂的粘弹特性，用Laplace变换和反奕换求解一维杆件的频响数物脉冲应函数，分析了极点部分和截部分在响应中所占比例，计算了在简谐激励了杆件的瞬态和稳态响应，并就加速度稳态响应部分与试验做了对比。