A joint mid-course and terminal course cooperative guidance law for multi-missile salvo attack

Salvo attacking a surface target by multiple missiles is an effective tactic to enhance the lethality and penetrate the defense system. However, existing cooperative guidance laws in the mid-course or terminal course are not suitable for long- and medium-range missiles or stand-off attacking. Because the initial conditions of cooperative terminal guidance that are generally generated from the mid-course flight may not lead to a successful cooperative terminal guidance without proper mid-course flight adjustment. Meanwhile, cooperative guidance in the mid-course cannot solely guarantee the accuracy of a simultaneous arrival of multiple missiles. Therefore, a joint mid-course and terminal course cooperative guidance law is developed. By building a distinct leader-follower framework, this paper proposes an efficient coordinated Dubins path planning method to synchronize the arrival time of all engaged missiles in the mid-course flight. The planned flight can generate proper initial conditions for cooperative terminal guidance, and also benefit an earliest simultaneous arrival. In the terminal course, an existing cooperative proportional navigation guidance law guides all the engaged missiles to arrive at a target accurately and simultaneously. The integrated guidance law for an intuitive application is summarized. Simulations demonstrate that the proposed method can generate fast and accurate salvo attack.     

系统思想在航天企业全面风险管理实施中的应用

介绍了风险管理国际标准ISO31000的核心内容——风险管理框架,以及系统思想的基本理念;以系统观点和方法为基础,对国际标准在航天企业全面风险管理中的应用进行了探讨。通过对全面风险管理工作的系统分解与集成,并以其中的"环境"分系统建设为例,进一步细分工作内容,与现有业务管理工作相结合,探索出全面风险管理工作在航天企业落地的基本路径。     

一个实用的WIN95启动界面

本文通过用简单的方法修改ＭＳＤＯＳ．ＳＹＳ和重新配置ＡＵＴＯＥＸＥＣ．ＢＡＴ文件。     

规则回转体自动铺丝轨迹规划与丝束增减

为满足自动铺丝轨迹的满铺覆性要求，针对现阶段自动铺丝轨迹规划存在的不足，提出了不同的丝束增减算法。首先讨论纤维铺放方向的确定和中心轨迹数量的计算，设计不同铺放方向轨迹的生成算法。然后以丝束重叠系数为重要参数，对于纤维局部堆积和空缺问题提出单侧纤维裁剪算法和双侧纤维裁剪算法，并对裁剪后的重叠区域和间隙区域进行面积求解，使得纤维丝束均匀覆于芯模表面。最后基于CATIA CAA二次开发平台，将上述算法集成到纤维铺放CAD系统中，通过运动仿真系统验证算法的正确性。利用提出的丝束增减算法，实现了间隙/重叠区的均匀分布，尽量降低了富树脂区等相关缺陷的聚集对性能的不良影响。     

Investigations into sensing characteristics of circular thin-plate electrostatic sensors for gas path monitoring

Circular thin-plate electrostatic sensors are promising in gas path monitoring due to their advantages of non-intrusiveness and easy installation. The spatial sensitivity and filtering effect are two important performance parameters. In this paper, an analytically mathematical model of induced charge on a circular thin-plate electrode is first derived. Then the spatial sensitivity and filtering effect of the circular electrostatic sensor are investigated by numerical calculations. Finally,experimental studies are performed to testify the theoretical results. Both theoretical and experimental results demonstrate that circular thin-plate electrostatic sensors act as a low-pass filter in the spatial frequency domain, and both the spatial filtering effect and the temporal frequency response characteristics depend strongly on the spatial position and velocity of the charged particle. These conclusions can provide guidelines for the optimal design of circular thin-plate electrostatic sensors.     

Experimental and numerical investigation on surface quality for two-point incremental sheet forming with interpolator

The unsatisfied surface quality seriously impedes the wide application of incremental sheet forming (ISF) in industrial field. As a novel approach, the interpolator method is a promising strategy to enhance the surface quality in ISF. However, the mechanism for the improvement of surface quality and the influence of interpolator properties on surface roughness are not well understood. In this paper, the influences of process variables (i.e. tool diameter, step size and thickness of interpolators) on the forming process (e.g. surface roughness, forming force and geometric error) are investigated through a systematic experimental approach of central composite design (CCD) in two-point incremental sheet forming (TPIF). It is obtained that the increase in thickness of interpolators decreases the surface roughness in direction vertical to the tool path while increases the surface roughness in direction horizontal to the tool path. Nevertheless, the combined influence between thickness of interpolators and process parameters (tool diameter and step size) is limited. Meanwhile, the placement of interpolator has little influence on the effective forming force of blank. In addition, the geometric error enlarges with the increase of step size and thickness of interpolator while decreases firstly and then increase with an increase in tool diameter. Finally, the influencing mechanism of the interpolator method on surface quality can be attributed to the decrease of the contact pressure due to the increase of contact area with the unchanged contact force. Meanwhile, the interpolator method eliminates the sliding friction on the surface of blank due to the stable relative position between the blank and the interpolator.     

Cutting path-dependent machinability of SiCp/Al composite under multi-step ultra-precision diamond cutting

Particle-tool interactions, which govern the synergetic deformation of SiC particle reinforced Al matrix composites under mechanical machining, strongly depend on the geometry of particle position residing on cutting path. In the present work, we investigate the influence of cutting path on the machinability of a SiCp/Al composite in multi-step ultra-precision diamond cutting by combining finite element simulations with experimental observations and characterization. Be consistent with experimentally characterized microstructures, the simulated SiCp/Al composite is considered to be composed of randomly distributed polygonally-shaped SiC particles with a volume fraction of 25vol%. A multi-step cutting strategy with depths of cut ranging from 2 to 10 μm is adopted to achieve an ultimate depth of cut of 10 μm. Intrinsic material parameters and extrinsic cutting conditions utilized in finite element simulations of SiCp/Al cutting are consistent with those used in corresponding experiments. Simulation results reveal different particle-tool interactions and failure modes of SiC particles, as well as their correlations with machining force evolution, residual stress distribution and machined surface topography. A detailed comparison between numerical simulation results and experimental data of multi-step diamond cutting of SiCp/Al composite reveals a substantial impact of the number of cutting steps on particle-tool interactions and machined surface quality. These findings provide guidelines for achieving high surface finish of SiCp/Al composites by ultra-precision diamond cutting.     

结合跳点引导的无人机随机搜索避撞决策方法

针对无人机在城市空域环境和密集交通流下的避撞决策问题，提出马尔科夫决策过程（MDP）和蒙特卡洛树搜索（MCTS）算法对该问题进行建模求解。蒙特卡洛树搜索算法在求解过程中为保证实时性而使其搜索深度受限，容易陷入局部最优，导致在含有静态障碍的场景中无法实现避撞的同时保证全局航迹最优。因此结合跳点搜索算法在全局规划上的优势，建立离散路径点引导无人机并改进奖励函数来权衡飞行路线，在进行动态避撞的同时实现对静态障碍的全局避撞。经过多个实验场景仿真，其结果表明改进后的算法均能在不同场景中获得更好的性能表现。特别是在凹形限飞区空域仿真模型中，改进后的算法相对于原始的蒙特卡洛树搜索算法，其冲突概率降低了36%并且飞行时间缩短47.8%。     

过虚拟交班点的能量最优制导律

针对固定目标的导弹过虚拟交班点制导问题，在希尔伯特空间下，基于最优化理论设计了有无终端落角约束两种情况下的全局能量最优制导律。通过对模型进行线性化，将提出的最优制导模型转化为线性二次型最优控制问题，在此基础上利用零控脱靶量（ZEM）概念对系统模型进行降阶，并推导出解析解。设计的制导律可以使导弹准确经过虚拟交班点，并实现期望终端落角。仿真结果表明，与经典制导律对比，该制导律可以显著减少全局控制能量消耗。     

Feasibility evaluation of failure models for predicting forming limit of metal foils

Forming limit of metal foil is an important index to evaluate its formability, and is of considerable significance to improve the quality of products. The ductile fracture (DF) behavior in microscale plastic deformation is remarkably affected by the geometry and grain size. To explore the size-dependent forming limit curve (FLC), the Holmberg and Marciniak tests of SUS304 foils with the thicknesses of less than 0.1 mm and diverse grain sizes were performed. In addition, the validity and feasibility of three types of existing failure models including Swift/Hill, Marciniak-Kuczynski (M-K) and DF criteria for predicting the micro-scaled FLCs were discussed. It is found that the Swift/Hill model possesses the worst accuracy with predicting deviation above 50%. Four classical DF criteria including Freudenthal, Ayada, Brozzo and Oh show great difference, and Oh model considering plastic anisotropy presents the best precision. The predicted deviation of M-K model is aggravated with increasing grain size and decreasing foil thickness, which is attributed to the intensified free surface roughening and transformation of fracture mechanism with miniaturization. This research thus provides a deeper understanding and valuable reference for the widespread application of FLC in microforming.