小积液情况下卧式转子的稳定性实验研究

盘腔积液现象在舰用燃气轮机工作过程中时有发生，汽化的滑油和水蒸气凝结形成积液。转子带动腔内的积液旋转，引发振动失稳，严重时会对发动机结构造成致命性破坏。为此，本文开展燃气轮机压气机盘腔积液的模拟实验研究，以双盘双支承的卧式柔性转子系统作为研究对象，重点关注小积液量的特点，对积液转子的动力学稳定性进行了研究。观测到转子的失稳现象，开展了不同积液体积、不同积液类型（水、植物油和滑油）等因素的影响规律研究，揭示了小积液的卧式转子动力学特征。研究结果表明：①对于积液失稳振动，存在失稳边界积液量，当积液量大于该边界值时，失稳将会发生。②失稳边界转速及恢复转速均高于临界转速。当转速高于失稳边界转速时，失稳将会发生。转速进一步增加，高于恢复转速时，失稳现象可能消失。③失稳时的振动特征为：出现幅值突增，次谐波成分也随之增加；基频和次谐波发生调制，表现出拍振特征。④随着积液体积的增加，失稳边界转速先减小后增加。⑤随着积液粘度系数增大，失稳边界转速和边界积液量均增大。     

Spacecraft formation-containment flying control with time-varying translational velocity

This paper investigates the problem of Spacecraft Formation-Containment Flying Control (SFCFC) when the desired translational velocity is time-varying. In SFCFC problem, there are multiple leader spacecraft and multiple follower spacecraft and SFCFC can be divided into leader spacecraft’s formation control and follower spacecraft’s containment control. First, under the condition that only a part of leader spacecraft can have access to the desired time-varying translational velocity, a velocity estimator is designed for each leader spacecraft. Secondly, based on the estimated translational velocity, a distributed formation control algorithm is designed for leader spacecraft to achieve the desired formation and move with the desired translational velocity simultaneously. Then, to ensure all follower spacecraft converge to the convex hull formed by the leader spacecraft, a distributed containment control algorithm is designed for follower spacecraft. Moreover, to reduce the dependence of the designed control algorithms on the graph information and increase system robustness, the control gains are changing adaptively and the parametric uncertainties are handled, respectively. Finally, simulation results are provided to illustrate the effectiveness of the theoretical results.     

Virtual target guidance-based distributed model predictive control for formation control of multiple UAVs

The paper proposes a Virtual Target Guidance (VTG)-based distributed Model Predictive Control (MPC) scheme for formation control of multiple Unmanned Aerial Vehicles (UAVs). First, a framework of distributed MPC scheme is designed in which each UAV only shares the information with its neighbors, and the obtained local Finite-Horizon Optimal Control Problem (FHOCP) can be solved by swarm intelligent optimization algorithm. Then, a VTG approach is developed and integrated into the distributed MPC scheme to achieve trajectory tracking and obstacle avoidance. Further, an event-triggered mechanism is proposed to reduce the computational burden for UAV formation control, which takes into consideration the predictive state errors as well as the convergence of cost function. Numerical simulations show that the proposed VTG-based distributed MPC scheme is more computationally efficient to achieve formation control of multiple UAVs in comparison with the traditional distributed MPC method.     

Shape control of spacecraft formation using a virtual spring-damper mesh

This paper derives a distance-based formation control method to maintain the desired formation shape for spacecraft in a gravitational potential field. The method is an analogy of a vir-tual spring-damper mesh. Spacecraft are connected virtually by spring-damper pairs. Convergence analysis is performed using the energy method. Approximate expressions for the distance errors and control accelerations at steady state are derived by using algebraic graph representations and results of graph rigidity. Analytical results indicate that if the underlying graph of the mesh is rigid, the convergence to a static shape is assured, and higher formation control precision can be achieved by increasing the elastic coefficient without increasing the control accelerations. A numerical exam-ple of spacecraft formation in low Earth orbit confirms the theoretical analysis and shows that the desired formation shape can be well achieved using the presented method, whereas the orientation of the formation can be kept pointing to the center of the Earth by the gravity gradient. The method is decentralized, and uses only relative measurement information. Constructing a distributed virtual structure in space can be the general application area. The proposed method can serve as an active shape control law for the spacecraft formations using propellantless internal forces.     

Deflecting APOPHIS with a flotilla of solar shields

The possibility to use the photonic pressure from the Sun for acting upon the orbit of a man-made object is well known.     

Laboratory Experiments on Preplanetary Dust Aggregation

For a better understanding of the processes which lead to the formation of planetesimals in the early solar nebula, we performed an extensive series of laboratory experiments. We find that the capture velocities in collisions between spherical grains are more than one order of magnitude higher than predicted by Chokshi et al (1993). In contrast, irregular grains have no capture threshold and can be better described by a sticking probability which is typically a few 10%, even for velocities exceeding 10 m/s. However, adhesion forces between spherical, micron-sized particles match the theoretical predictions very well, although contact areas and deformations are of the order of inter-atomic distances only. Aggregation experiments in rarefied turbulent gases reveal the fractal nature of dust aggregates. Mass distribution functions are bell-shaped. Similar behaviour can be found in aggregation experiments with sedimenting particles. Experiments on collision-induced aggregate compaction and fragmentation match the numerical simulations by Dominik and Tielens (1997) very well if revised experimental values of the break-up energy (from our impact experiments) and the rolling-friction force (from our AFM measurements on particle chains) are used. This revised version was published online in June 2006 with corrections to the Cover Date.     

星载编队飞行InSAR地形图生成方法研究

研究了星载编队飞行InSAR的空间几何关系及特点,给出了编队飞行InSAR的回波信号模型和高度计算公式,给出了相位与地形图高度的换算方法。对于InSAR系统特有的迎坡缩短等现象给出了有效的斜距地距变换方法,提出了几何作图实现方法和编程实现方法。根据真实地貌,分三种情况讨论了几何作图与编程实现。在仿真实验中,设置了圆锥体地面场景验证算法,校正后的图形能够反映地面真实场景。     

有人驾驶飞机（固定翼）飞行品质的修改建议

论述了现行国家军用标准（ＧＪＢ－１８５－８６）的一些不足之处，从指导思想、飞行吕质要求的逻辑结构、故障概率、飞行操纵系统、满足要求的论证及要求的内容等几个方面提出一些修改建议，以供修订新标准时参考。     

有机小分子杂化阻尼材料研究进展

从组成、制备工艺、阻尼机理讨论了有机小分子杂化阻尼材料的研究现状，并给出了一些该类阻尼材料的实例及其阻尼性能数据，提出了有机小分子杂化阻尼材料目前存在的问题，指出该类阻尼材料阻尼性能突出、Tg可设计，是一种颇有前景的材料。     

战斗机俯仰瞬态敏捷性与飞行品质关系研究

采用飞机纵向运动的非线性数学模型和线化模型分别进行数字仿真，确定俯仰瞬态的敏捷性尺度。结果表明在同样驾驶员操纵规律输入下，两种模型仿真获得的敏捷性尺度相当接近。然后采用线化模型来研究俯仰敏捷性与飞行品质的关系。最后导出了近似计算俯仰敏捷性尺度的公式。