航空中的力反馈技术

对力反馈在航空中的应用进行综述,主要涉及无人机遥操作和飞行安全性两大领域。首先,为了解决无人机所捕获的图像信息在分辨率、动态范围、视野等方面的不足,力反馈技术逐渐被引入,并得到了初步应用。起初没有考虑地面控制站与无人机之间的通讯时延问题,力反馈与小波变量的结合能有效地解决时延问题,但操纵负荷仍然很大,继而力刚度反馈技术被提出。其次,飞机执行器速率的限制易导致飞行员诱发的震荡危及飞行安全,为了有效地抑制这类震荡,智能提示和智能增益技术被提出。通过上述的分析和探讨,说明力反馈技术在航空中的研究与应用具有重要的意义。     

Global aerodynamic design optimization based on data dimensionality reduction

In aerodynamic optimization, global optimization methods such as genetic algorithms are preferred in many cases because of their advantage on reaching global optimum. However, for complex problems in which large number of design variables are needed, the computational cost becomes prohibitive, and thus original global optimization strategies are required. To address this need, data dimensionality reduction method is combined with global optimization methods, thus forming a new global optimization system, aiming to improve the efficiency of conventional global optimization. The new optimization system involves applying Proper Orthogonal Decomposition (POD) in dimensionality reduction of design space while maintaining the generality of original design space. Besides, an acceleration approach for samples calculation in surrogate modeling is applied to reduce the computational time while providing sufficient accuracy. The optimizations of a transonic airfoil RAE2822 and the transonic wing ONERA M6 are performed to demonstrate the effectiveness of the proposed new optimization system. In both cases, we manage to reduce the number of design variables from 20 to 10 and from 42 to 20 respectively. The new design optimization system converges faster and it takes 1/3 of the total time of traditional optimization to converge to a better design, thus significantly reducing the overall optimization time and improving the efficiency of conventional global design optimization method.     

高精度可编程流量积算仪的设计

本文介绍了一种高精度可编程流量积算仪的设计方法，包括该系统的测量数学模型建立，测量原理，硬件设计及软件设计。该系统可实现流量的高精度积算（优于１‰），软件校准，多种报警及掉电保护。     

螺纹紧固件耐久性分析方法的实验研究

本文在实验的基础上，提出了应用于螺栓螺纹表面裂纹上一种抗疲劳分裂研究方法－－耐久性损伤分析方法，考虑了一个新的耐久性损伤模型，螺纹圆角处开裂，把适用于紧固孔上小裂纹模型上的理论方法发展延伸至螺纹圆角模型大裂纹上，并通过实验得到了验证。同时给出了一个例子，预测结果与实验结果拟合得很好，为带螺纹紧固件的耐久性分析方法的研究提供了一种可行的方法。     

烟丝配料单片机控制系统

本文介绍了配料生产过程中单片机控制系统的硬件结构及软件流程。由于硬件和软件设计上都采用了模块化的结构，所以便于安装调试，整个系统可推广到诸如水泥、矿产、食品加工等生产中。     

某型号机襟翼机构摩擦磨损可靠性分析与计算(英文)

本文应用空间机构的建模方法建立了某型号机襟翼机构运动的数学模型。当给出输入参数时，可通过此数学模型求出襟翼机构的理论输出参数。输入参数相同时，通过引入摩擦磨损量至数学模型可获得襟翼机构的实际输出参数，并在此基础上求得襟翼机构的摩擦磨损可靠性。     

中国核电厂操作员反应时认知模型的应用(英文)

讨论了一些有关人员行为与时间有依赖关系的可靠性模型；给出了中国核电厂操作员在清华大学培训模型机上的一些可靠性实验结果。此外，还根据已获得的实验数据计算了在ＡＴＷＳ事故条件下人的失误概率。     

A formal approach using SysML for capturing functional requirements in avionics domain

In this work, a Model-Based Systems Engineering approach based on SysML is proposed. This approach is used for the capture and the definition of functional requirements in avionics domain. The motivation of this work is triple: guide the capture of functional requirements, validate these functional requirements through functional simulation, and verify efficiently the consistency of these functional requirements. The proposed approach is decomposed into several steps that are detailed to go from conceptual model of avionics domain to a formal functional model that can be simulated in its operating context. To achieve this work, a subset of SysML has been used as an intermediate modelling language to ensure progressive transformation that can be understood and agreed by system stakeholders. Formal concepts are introduced to ensure theoretical consistency of the approach. In addition, transformation rules are defined and the mappings between concepts of ARP4754A civil aircraft guidelines and SysML are formalized through meta-model. The resulting formalization enables engineers to perform functional simulation of the top-level functional architecture extracted from operational scenarios. Finally, the approach has been tested on an industrial avionics system called the Onboard Maintenance System.     

飞机机身近区电磁散射建模研究

采用物理光学法和一致性几何绕射理论，分析机身各 球面波照射下的近场电磁散射特性几何绕射并建立其雷达散射截面（ＲＣＳ）数学模型，同时对于复杂机身的前部，采用面元油、即采用双三次Ｂ样条技术对机外形进行拟合，然后再用一致性几何绕射理论进行计算。种方法具有一定的可信度。     

Controlling factors of Region 2 field-aligned current and its relationship to the ring current: Model results

One essential component of magnetosphere and ionosphere coupling is the closure of the ring current through Region 2 field-aligned current (FAC). Using the Comprehensive Ring Current Model (CRCM), which includes magnetosphere and ionosphere coupling by solving the kinetic equation of ring current particles and the closure of the electric currents between the two regions, we have investigated the effects of high latitude potential, ionospheric conductivity, plasma sheet density and different magnetic field models on the development of Region 2 field-aligned currents, and the relationship between R2 FACs and the ring current. It is shown that an increase in high latitude potential, ionospheric conductivity or plasma sheet density generally results in an increase in Region 2 FACs’ intensity, but R2 FACs display different local time and latitudinal distributions for changes in each parameter due to the different mechanisms involved. Our simulation results show that the magnetic field configuration of the inner magnetosphere is also an important factor in the development of Region 2 field-aligned current. More numerical experiments and observational results are needed in further our understanding of the complex relationship of the two current systems.