扩压器内的冷凝对流场的影响

扩压器处于超临界工作状态时,由于喉道后面的激波与附面层的相互作用,使出口流场发生畸变.本文探讨了扩压器内发生的冷凝对畸交流场的影响.结果表明,在实验范围内,由于冷凝使畸变流场的平均紊流度增加12～25%,稳态畸变指数DC_(60)可能增加、不变或减小.可见在研究发动机与进气道的相容性时,冷凝是不可忽视的影响因素之一.     

带肋和双排出流孔通道的流动特性

研究了通道进口雷诺数和总出流比对带肋和双排出流孔通道流量系数和压力分布的影响。实验研究的通道入口雷诺数为3×104~1.5×105,通道总出流比为0.09~0.22。结果表明:通道总出流比较小时,流量系数沿流向减小。通道进口雷诺数增加,流量系数先增加,之后基本不变;通道总出流比较大时,流量系数基本不变;各工况下总压系数沿流向依次经历迅速减小、基本不变、继续减小的过程;沿流向各位置上的总压系数在通道进口雷诺数为6×104~9×104时最小;出流比增大,沿流向各位置上的总压系数随之增大。     

一种模拟喷管二维流场的新方法

采用ＳＩＭＰＬＥ方法对固体火箭发动机喷管进行了纯气相流场的数值模拟。推导了建立在同位网格之上利用协变物理速度分量为计算变量的离散方程，采用协变物理速度分量推导压力修正方程，对密度采用一阶迎风格式插值，将ＳＩＭＰＬＥ方法扩大到计算可压流动。计算结果表明：本方法计算精度高，收敛速度快，程序编写简单。     

求解可压缩N－S方程的无粘－粘性分数步法

用按物理过程作时间分裂的无粘－粘性分数步法求解可压缩Ｎ－Ｓ方程，无粘步用高效欧拉算法解欧拉方程，粘性步用全隐格式解抛物方程；并采取了有效措施消除由分步法产生的时间和空间不相容性，文中给出了轴对称喷管内外流场的数值模拟结果。     

稳态周向混合畸变对压气机特性和流场的影响

用完全径向平衡方程加多扇平行压气机模型处理复杂畸变流场的方法，计算出进口流场组合参数畸变对压气机特性和性能的影响，并得出了压气机在进口畸变条件下流场的详细情况。     

涡轮流量计的标定

讨论了涡轮流量计的几种标定系统，包括稳态标定，动态标定，在线标定和实时标定，其中在线标定和实时标定是提高涡轮流量计测量精度的重要措施，计算机辅助测试系统的建立已不难实现这２种标定。     

突扩后突缩的三维流场计算

根据有关固体火箭发动机装药后端到喷管间的空间特征,对三维突扩后突缩内部流场计算进行了探索和研究。计算中成功地应用了SIMPLE算法解决复杂的三维流场计算问题,并在初场构成、源项离散及松弛系数的选取等方面都进行了调试改进。通过建立计算模型、划分网格、对方程及边界条件离散化和非线性处理,以及线性方程组求解等,计算得到了符合物理规律的数值解,指出了空间涡及二次涡的存在。     

三维侧面突扩燃烧室冷态气流场的数值模拟

本文对四侧30°进气并带有进气管道和尾喷口的突扩燃烧室冷态气流场进行了数值模拟.对这种复杂非规则边界的计算区域,首次采用分段算法进行计算.结果表明:分段算法可以提高网络利用率,缩短机时,消除虚假扩散,提高计算准确度,计算结果与试验结果基本符合.     

Electrochemical trepanning with uniform electrolyte flow around the entire blade profile

In the traditional machining process for diffusers, blades are easily deformed, and methods suffer from high tool wear and low efficiency. Electrochemical machining(ECM) possesses unique advantages when applied to these difficult-to-machine materials. In the ECM process, theflow field plays a crucial role. Here, an electrolyte flow mode that supplies uniform flow around the entire blade profile was adopted for electrochemical trepanning of diffusers. Various flow rates were employed to obtain the optimal flow field. Simulations were conducted using ANSYS software, and results indicated that increasing the flow rate substantially afforded a more uniform flowfield. A series of experiments was then performed, and results revealed that increasing the flow rate greatly improved both the machining efficiency and the surface quality of the diffusers. The maximum feeding rate of the cathode reached 4 mm/min, the blade taper of the concave part decreased to 0.02, and the blade roughness was reduced to 1.216 lm. The results of this study demonstrated the high feasibility of this method and its potential for machining other complex components for engineering applications.     

Aerodynamic performance enhancement for flapping airfoils by co-flow jet

Introducing active flow control into the design of flapping wing is an effective way to enhance its aerodynamic performance. In this paper, a novel active flow control technology called Co-Flow Jet (CFJ) is applied to flapping airfoils. The effect of CFJ on aerodynamic performance of flapping airfoils at low Reynolds number is numerically investigated using Unsteady Reynolds Averaged Navier-Stokes (URANS) simulation with Spalart-Allmaras (SA) turbulence model. Numerical methods are validated by a NACA6415-based CFJ airfoil case and a S809 pitching airfoil case. Then NACA6415 baseline airfoil and NACA6415-based CFJ airfoil with jet-off and jet-on are simulated in flapping motion, with Reynolds number 70,000 and reduced frequency 0.2. As a result, CFJ airfoils with jet-on generally have better lift and thrust characteristics than baseline airfoils and jet-off airfoil when C_μ is greater than 0.04, which results from the CFJ effect of reducing flow separation by injecting high-energy fluid into boundary layer. Besides, typical kinematic and geometric parameters, including the reduced frequency and the positions of the suction and injection slot, are systematically studied to figure out their influence on aerodynamic performance of the CFJ airfoil. And a variable C_μ jet control strategy is proposed to further improve effective propulsive efficiency. Compared with using constant C_μ, an increase of effective propulsive efficiency by 22.6% has been achieved by using prescribed variable C_μ for NACA6415-based CFJ airfoil at frequency 0.2. This study may provide some guidance to performance enhancement for Flapping wing Micro Air Vehicles (FMAV).