有关误差的基本概念与表示

阐述了“测量误差”、“测量不确定度”及“测量准确度，，等计量学基本概念，明确指出了这些概念的内涵、表达方法及使用中应注意的问题，并讨论了它们的联系与区别。     

真空计量概述

近代真空技术作为一种实用的基础技术,由于它提供了稀薄的气体氛围和清洁的环境条件,获得了越来越广泛的应用。由此,对真空计量提出了不断增长的需要和发展。现在,它已成为计量学的一个新的独立分支。     

非牛顿流体粘度测试方法及标准物质研究进展

本文介绍了常用非牛顿流体粘度的测量方法如毛细管法、旋转粘度计法、旋转流变仪法等,对流变仪校准方法和非牛顿流体粘度标准物质的国内外研究进展情况进行了综述,并对未来非牛顿流体粘度标准物质的发展趋势进行了预测和展望。     

Near-wall topological patterns and flow structures over a simplified Danaus plexippus model

Studies on the high-lift mechanisms of butterfly gliding flights shed light on the design of the micro air vehicles. The flow field around a simplified Danaus plexippus model is investigated using the hydrogen bubble visualization and the Particle Image Velocimetry (PIV) techniques. There are three near-wall topological patterns with different Angles of Attack (AoAs): the separation bubble, the Leading-Edge Vortex (LEV) and the high AoAs flow. For the separation bubble pattern, two saddles and two foci form in the middle of the model. The features of the LEV pattern are the leading-edge separation lines. The topological characteristics of the separation lines are changed by the interaction between the LEV and the Wing-Tip Vortex (WTV). For the high AoAs flow pattern, four unstable foci are found at the forewing and the hindwing respectively. The angle between the trajectory of the WTV and the model increases with increasing AoA even though the slope of the WTV angle versus AoA curve declines at the moderate AoAs.     

平板表面薄圆柱绕流摩擦力矢量场全局测量

针对壁面摩擦力矢量场测量问题,基于剪切敏感液晶(SSLC)涂层技术建立了一种测量平板表面摩擦力矢量场的方法。该方法基于多视角测量原理,采用六台同步相机从不同方向同时采集SSLC涂层在摩擦力作用下的颜色变化,与采用单台相机相比能够降低测量噪声,并且具有测量非定常流动的摩擦力场的潜力。应用该方法测量了平板表面薄圆柱绕流的摩擦力矢量场,结果表明:(1)SSLC涂层能够以彩色方式定性显示壁面摩擦力信息;(2)通过对不同方向观测的SSLC涂层颜色进行分析处理,该方法能够高分辨率测量薄圆柱绕流的摩擦力矢量场,详细地捕获了流动特征;(3)同一份SSLC涂层可以重复使用并且可用于测量不同的摩擦力矢量场。     

Remote-controlled flexible pose measurement system and method for a moving target in wind tunnel

The measurement of position and attitude parameters for the isolated target from a high-speed aircraft is a great challenge in the field of wind tunnel simulation technology. This paper proposes a remote-controlled flexible pose measurement system in wind tunnel conditions for the separation of a target from an aircraft. The position and attitude parameters of a moving object are obtained by utilizing a single camera with a focal length and camera orientation that can be changed based on different measurement conditions. Using this proposed system and method, both the flexibility and efficiency of the pose measurement system can be enhanced in wind tunnel conditions to meet the measurement requirements of different objects and experiments, which is also useful for the development of an intelligent position and attitude measurement system. The position and the focal length of the camera also can be controlled remotely during measurements to enlarge both the vertical and horizontal measurement range of this system. Experiments are conducted in the laboratory to measure the position and attitude of moving objects with high flexibility and efficiency, and the measurement precision of the measurement system is also verified through experiments.     

一种冲击响应谱试验设备校准装置的研制

介绍了冲击响应谱基本概念及其试验设备的分类与工作原理，参考现行冲击试验台检定规程提出了针对该设备的校准方法，设计了一种基于虚拟仪器技术的新型冲击响应谱试验设备校准装置，给出了典型冲击波形（半正弦、矩形、后峰锯齿）的冲击响应谱仿真计算结果并进行了验证，计算结果与理论结果完全一致，证明算法准确可靠，能够实现对冲击响应谱试验设备的校准。     

Numerical investigation of flow mechanisms of tandem impeller inside a centrifugal compressor

This study numerically investigated a single stage centrifugal compressor ‘‘Radiver’’ with a wedge diffuser and several tandem-designed impellers to explore the flow phenomena within the tandem impeller and the potential to enhance compressor performance. The results demonstrate that tandem design and clocking fraction (λ_s) significantly affects the compressor performance. The compressor stage with tandem impellers of Series A of boundary layer growth interruption alone are observed to have a widely operating range but efficiency and total pressure ratio penalty compared with that of conventional impeller. The tandem impeller with at least the same impeller efficiency as the conventional design is considered as a critical design criteria so that further modification process based on the flow characteristic of tandem impeller is necessary. In order to restrain the inducer wake and exducer shock losses, parameters modification of blade angle and thickness distributions are necessary and the modified tandem impeller of Series B is obtained. The modified tandem impeller with 25% clocking arrangement shows an 8.45% stall margin increase and maintains the total pressure ratio and efficiency as the conventional design, which proves the potential of tandem impeller to improve compressor stage performance. It is noteworthy that the tandem impellers of Radiver have not shown obviously balanced exit flow field and the fundamental mechanism of stall margin extending of tandem impeller lies on the improved impeller/diffuser matching performance resulting from the incidence angle variation at diffuser inlet.     

Streamwise vortex generation by the rod

The technology development related to aerodynamics is leading to ever increasing loads of wings, airfoils and turbine and compressor blades. The increase in aerodynamic forces is often leading to flow separation and depreciation of the aerodynamic performance of flying objects or propulsion systems. Flow control methods are required to avoid these negative effects. In the recent two decades the flow control by means of air-jet vortex generators has been also intensively investigated. In this method a streamwise vortex is introduced by an oblique jet. The necessity to supply air by a pipe system may be considered a disadvantage. In order to eliminate this feature, it has been proposed to put out a rod instead of a jet. It has been shown that the application of a rod can introduce the same effect as a jet, as long as the streamwise vortex generation is concerned and appropriate dimensions are used. The present paper focuses on the influence of rod vortex generators on a flow pattern downstream. The results presented here concern experimental and numerical investigations and provide guidelines for the design of a new flow control method dedicated mainly to external flows.     

脉动背压离心压气机动态特性及稳定性

试验研究了脉动背压对离心压气机动态响应及喘振特性的影响规律。结果表明:脉动背压条件时压气机性能存在明显非定常特征,高频大幅脉动背压和陡峭的压比流量特性均可强化该非定常特征。基于试验结果,提出了脉动背压压气机非定常性能与脉冲特性及运行工况的关联模型。脉动背压导致压气机喘振边界左移,稳定运行范围最高拓宽12.3%。压气机向小流量工况趋近时,脉动背压引起的流场振荡减弱,但喘振所致的流场振荡逐步强化,致使流场振荡强度呈V型变化特征,表明了脉动背压与压气机气动稳定性之间存在耦合关系。研究探明了脉动背压条件对压气机动态响应和喘振特性的影响规律,对帮助真实运行环境压气机设计理论的发展具有重要意义。