超声速和高超声速横向喷流数值模拟

为了解横向喷流的干扰影响和喷口附近的流场结构,采用分块对接网格和“0”型网格技术,数值求解N—S方程来模拟超声速和高超声速流场中横向喷流的干扰流场。对两种尖拱弹身外形的超声速和高超声速喷流干扰流场进行了数值计算,计算结果与风洞实验数据吻合一致。在此基础上,开展了某型导弹多喷构型干扰流场的数值模拟,得出一些横向喷流数值模拟的结论。     

总压畸变在三级轴流压气机中的传递性能研究

介绍了一种计算进气畸变的方法.通过求解非稳态三维欧拉方程,计算压气机各截面气流参数分布.以74A三级压气机为例,进行了周向总压畸变传递特性计算,得到了压气机进口存在总压畸变时总压、静压、总温和流量系数在各截面上的分布规律,得出了畸变强度、畸变范围和畸变位置在轴向上的分布规律.      

系统级链路预算方法

计算地面站和飞行器之间的通信链路余量问题常依赖于简单的数学叠加法,但在实际应用中,复杂飞行器模型以及气候条件等干扰因素都容易造成天线方向图的畸变,从而导致链路预算不准.为了尽可能准确评估链路性能,提出了一种系统级链路预算评估方法.应用旋转变换矩阵,建立了姿态变化造成天线方向图相对变化的关系式.仿真得出装机后天线方向图畸变信息.根据相对变化量对方向图信息作数据挖掘.按全系统链路余量表达式计算变姿态情况下链路余量.评估了一种超短波通信天线与地面站天线间的通信链路性能,以及飞机降落时航向天线和航向台站之间的通信链路问题,表明该方法具有一定工程应用价值.     

Lumped element modelling of synthetic jet actuators

In this paper, a lumped element model of synthetic jet actuator is presented and used to predict the temporal variation of the jet velocity. Unlike the previous model reported in the literature, in this model the mechanical movement of the diaphragm is decoupled from the fluid phenomenon in the actuator cavity to allow the modelling of fluid mechanics aspect of the actuator to be investigated and validated separately. Furthermore, the “minor losses” occurring at the orifice exit is included and linked to the jet exit velocity profile. The results from this model are validated using the existing experimental data and CFD simulations. It is found that this model is capable of predicting the temporal variation of synthetic jets both in phase and magnitude when the actuator is operating away from the Helmholtz resonance frequency. Although the model fails to predict the correct phase information at the Helmholtz resonance frequency, it can still produce the jet peak velocity that is in good agreement with the experimental data. The lumped element model presented in this paper can be used to provide a reliable prediction of the jet peak velocity needed in the initial design of synthetic jet actuators for practical applications.     

基于实验的发动机插板式进气畸变压力谐振分析

某型涡扇发动机插板式进气畸变实验中,当插板升高到35%以上,进气截面各个测点畸变扰动出现约为32 Hz大幅振荡.用气流压力波动方程计算了进气道容腔谐振频率为34 Hz.表明该谐振是由插板与发动机之间的容腔引起的.不同转速和流量下,计算和实验的结果都基本稳定.由分析可知:150 Hz以下脉动压力是大幅稳定和周期性的.高频部分主要是小幅随机压力脉动,其速率和加速度变化比较剧烈.在发动机喘振前,谐振频率压力振荡能量大大增加,其它低频和高频成分能量迅速减少,形成典型的谐振型压力振荡.      

高超声速球锥组合体流场数值分析

用数值模拟法研究了高超声速球锥组合体的层流流场特性与热行为,给出了流场计算方法与格式。研究结果表明：球锥组合体压缩拐角在高超声速下出现流动分离,其流动特性受壁面温度的影响极大;提高壁面温度使压缩拐点处分离点位置前移,再附点位置后移,涡心位置提高,分离范围扩大,同时降低球锥组合体热流的分布,球锥组合体头部热流明显减小。     

带导流叶排的轴流压气机级叶尖处理机匣容畸变特性

基于叶尖处理机匣轴流压气机叶排实验特性,应用畸变传递的矩阵分析模型,分析了进口导流叶排对叶尖处理机匣结构容总压畸变特性影响,初步建立了在进口导流叶排下几种处理机匣结构对总压畸变及其沿轴流压气机叶排衰减特性影响规律。计算结果表明,叶尖处理机匣虽均能有效提高压气机级的稳定工作范围,但削弱了转子叶排和静子叶排的抗总压畸变能力,这对设计合理的扩大轴流压气机稳定裕度处理机匣结构尤为重要。      

WANDFULH液压比例阀在多功能液压试验台设计中的应用

比较详细的介绍了世界著名的液压元件公司—WANDFULH（瑞士）的液压比例阀在流量和压力控制方面的几种不同应用,并介绍了相应的Amplifier／oontmller card sd1伺服放大控制板的电路连接和软件应用,以及液压实验台的参数、功能要求和调试过程。     

几何代数域内的光流场改进算法

提山了一种新的光流场计算方法：首先,在几何代数域内推导了光流约束方程的新形式;然后,在速度场平滑的基础上,通过求解关于初值问题的热传导方程求解光流场;最后,给出光流场的数值解和仿真结果。实验证明此方法是有效的。     

7一种双S形进气道流场特性殛控制的试验研究

In order to provide the line of-sight blockage of the engine face for an advanced Uninhabited Combat Air Vehicle(UCAV), a highly curved serpentine inlet is proposed and experimentally studied. Based on the static pressure distribut ion measurement along the wall, the flow separation is found at the top wall of the second S duct for the baseline inlet design, which yields a high flow distortion at the exit plane. To improve the flow uniformity, a single array of vortex generators (VGs) is employed within the inlet. In this experimental study, the effects of mass flow ratio, free stream Mach number, angle of attack and yaw on the performance of a serpentine inlet instrumented with VGs are obtained. Results indicate: (1) Compared with the baseline serpentine design without flow control the application of the VGs promotes the mixing of core flow and the low momentum flow in the boundary layer and thus prevents the flow separation. Under the design condition, the exit flow distortion (

) decreases from 11. 7% to 2.3% by using the VGs. (2) With the descent of the free stream Mach number the total pressure loss decreases. How ever, the circular total pressure distortion increases. When the angle of attack rises from - 4° to 8°, the total pressure recovery and the circular total pressure distortion both go down. In addition, with the increase of yaw the total pressure recovery is fairly constant, while the circular total pressure distortion ascends gradually. (3) When Ma₀=0.6-0.8, α= −4°-8° and β= 0°-6°, the total pressure recovery varies between 0.936 and 0.961, the circular total pressure distortion coefficient varies between 1.4% and 5.4% and the synthesis distortion coefficient has a ranges from 3.8% to 7.0%. The experimental results confirm the excellent performance of the newly designed serpentine inlet incorporating VGs.