民机方向舵伺服作动系统频率特性分析研究

现代飞机越来越多地采用电传飞控技术,相较机械系统具有便于多功能综合、易于实现主动控制的优势。舵回路作为电传飞控系统的重要组成部分,用于执行控制指令实现舵面偏转,其控制特性对飞行品质影响至关重要。就某民机方向舵伺服作动系统进行频域特性的分析研究,建立数学模型,仿真分析其频域特性,并通过铁鸟综合实验台验证仿真结果。     

民用飞机情景识别系统试飞研究

由于平视显示器(HUD)、视景增强系统(EVS)以及合成视景系统(SVS)优秀的情景显示能力,HUD与EVS、SVS结合使用将显著提高飞行机组情景识别以及态势感知能力。同时,HUD与自动着陆系统结合使用可降低着陆和起飞时的最低天气标准。随着机组情景识别能力的提高,必须提出高效的试飞方法来验证情景识别系统的适航符合性,在分析EVS、SVS与HUD结合使用的基础上,提出综合的优化的民用飞机机组情景识别系统试飞方法以及基于任务的符合性判据。     

机载信息系统的应用研究及发展趋势初探

介绍了机载信息系统的技术现状,在民机上的不同应用架构及各种架构所具有的特点。从市场定位、新老机型应用、技术融合程度、人机工效等方面对机载信息系统的应用进行了研究,并根据机载系统产品发展的一般规律,对未来机载信息系统的发展趋势进行了初步预测。     

用于气动导数辨识的试飞数据处理方法研究

飞行试验的测量环境十分复杂,未经处理的试飞数据直接用于飞机的气动导数辨识会降低辨识精度,甚至导致辨识的迭代过程发散或收敛到错误值。提出一套从野值剔除、数据平滑、时延修正到相容性检验的试飞数据处理方法,并将其应用到真实试飞数据的气动导数辨识中,通过对比分析数据处理前后的辨识过程和辨识结果,验证了本文提出的数据处理方法在改善辨识过程收敛特性和提高辨识精度上的有效性。     

基于堆栈自编码网络的铣刀磨损特征提取方法

针对传统切削数据人工提取的特征主观性和盲目性强、特征提取过程耗时且提取质量难以保证等问题,提出一种基于堆栈自编码网络(SAE)的切削信号数据特征提取方法,构建了由3个自动编码器(AE)组成的SAE网络。前一个AE无监督训练后得到隐藏层特征,作为下一个AE的输入,最后整体利用反向传播算法进行有监督微调,从而得到更优的特征表达。从基于SAE的数据重构性能分析和加工信号特征主成分分析2个层面,对切削信号特征提取的优劣进行评估。实例验证说明,相比于传统手工提取特征的方法,所提方法在压缩信号的特征提取方面表现出明显的优势,进一步说明了SAE特征提取的有效性。     

民机飞行机组操作程序设计探讨

飞行机组操作程序是飞行员完成驾驶舱操作任务的基础,对于确保飞机安全飞行具有重要的意义。参考民用航空领域若干典型的驾驶舱操作研究成果,并结合实际工程经验,提出了飞行机组操作程序设计的一般流程、方法,包括制造商在操作程序设计中对适航规章、设计技术和运营经验等方面的内容。提出的设计流程和方法可用于指导民用飞机飞行机组操作程序设计。     

Friction compensation for low velocity control of hydraulic flight motion simulator: A simple adaptive robust approach

Low-velocity tracking capability is a key performance of flight motion simulator (FMS), which is mainly affected by the nonlinear friction force. Though many compensation schemes with ad hoc friction models have been proposed, this paper deals with low-velocity control without friction model, since it is easy to be implemented in practice. Firstly, a nonlinear model of the FMS middle frame, which is driven by a hydraulic rotary actuator, is built. Noting that in the low velocity region, the unmodeled friction force is mainly characterized by a changing-slowly part, thus a simple adaptive law can be employed to learn this changing-slowly part and compensate it. To guarantee the boundedness of adaptation process, a discontinuous projection is utilized and then a robust scheme is proposed. The controller achieves a prescribed output tracking transient performance and final tracking accuracy in general while obtaining asymptotic output tracking in the absence of modeling errors. In addition, a saturated projection adaptive scheme is proposed to improve the globally learning capability when the velocity becomes large, which might make the previous proposed projection-based adaptive law be unstable. Theoretical and extensive experimental results are obtained to verify the high-performance nature of the proposed adaptive robust control strategy.     

Prediction of forming limit curve （FLC） for AI-Li alloy 2198-T3 sheet using different yield functions

The Forming Limit Curve （FLC） of the third generation aluminum-lithium （Al-Li） alloy 2198-T3 is measured by conducting a hemispherical dome test with specimens of different widths. The theoretical prediction of the FLC of 2198-T3 is based on the M-K theory utilizing respectively the von Mises, Hill＇48, Hosford and Barlat 89 yield functions, and the different predicted curves due to different yield functions are compared with the experimentally measured FLC of 2198-T3. The results show that though there are differences among the four predicted curves, yet they all agree well with the experimentally measured curve. In the area near the planar strain state, the predicted curves and experimentally measured curve are very close. The predicted curve based on the Hosford yield function is more accurate under the tension-compression strain states described in the left part of the FLC, while the accuracy is better for the predicted curve based on Hill＇48 yield function under the tension-tension strain states shown in the right part.     

Prediction of forming limit curve (FLC) for Al-Li alloy 2198-T3 sheet using different yield functions

The Forming Limit Curve (FLC) of the third generation aluminum-lithium (Al-Li) alloy 2198-T3 is measured by conducting a hemispherical dome test with specimens of different widths. The theoretical pred...     

烟台军民合用机场管制运行工作浅析

本文介绍了烟台机场军民航管制运行工作现状，分析了制约管制运行工作的主要原因，并就如何做好烟台军民合用机场的管制运行工作，分别从制度、环境、培训、协调、人的因素等多方面进行了详细论述。