民用飞机着陆灯与机场助航灯光在飞机夜航中的作用

飞机着陆灯与机场助航灯光系统为民用飞机夜航起飞、着陆提供照明,两者都十分重要。民航法规CCAR121部要求飞机必须装有至少两个着陆灯,而AC-97-FS-2011-01则要求民用机场必须配备助航灯光系统。分析了着陆灯与助航灯光两者在夜航着陆过程中的作用,并阐述两者的相互关系。     

Transition prediction and sensitivity analysis for a natural laminar flow wing glove flight experiment

Natural laminar flow technology can significantly reduce aircraft aerodynamic drag and has excellent technical appeal for transport aircraft development with high aerodynamic efficiency. Accurately and efficiently predicting the laminar-to-turbulent transition and revealing the maintenance mechanism of laminar flow in a transport aircraft’s flight environment are significant for developing natural laminar flow wings. In this research, we carry out natural laminar flow flight experiments with different Reynolds numbers and angles of attack. The critical N-factor is calibrated as 9.0 using flight experimental data and linear stability theory from a statistical perspective, which makes sure that the relative error of transition location is within 5%. We then implement a simplified e^N transition prediction method with a similar accuracy compared with linear stability theory. We compute the sensitivity information for the simplified e^N method with an adjoint-based method, using the automatic differentiation technique (ADjoint). The impact of Reynolds numbers and pressure distributions on TS waves is analyzed using the sensitivity information. Through the sensitivity analysis, we find that: favorable pressure gradients not only suppress the development of TS waves but also decrease their sensitivity to Reynolds numbers; there exist three special regions which are very sensitive to the pressure distribution, and the sensitivity decreases as the local favorable pressure gradient increases. The proposed sensitivity analysis method enables robust natural laminar flow wings design.     

Dynamics,stability, and control of a four-cable mount system for wind tunnel test

A four-cable mount system is proposed for full-model wind tunnel flutter tests, which may adjust the pitch and roll attitude of the aircraft scaled model and ensure that the model is not subjected to cable tension. The system provides sufficient support to simulate the free flight of the aircraft by applying appropriate spring stiffness and cable tensions. The proposed four-cable mount system is modeled based on Lagrange mechanics, and its dynamics equations consider aerodynamic effects. The singularity of the system and its bifurcation characteristics under flow conditions are analysed to determine the supercritical bifurcation phenomenon for different tension levels and distances from the front suspension point to the mass centre of the model. The mathematical expressions of the longitudinal flight stability of the cable mount system are derived by linearising the system dynamics equations using small perturbations. The influence of the cable tension, spring stiffness, suspension point position, and other factors on the flight stability of the aircraft are analysed. A feedforward control algorithm is proposed to minimize the total elastic potential energy of the system. The results show that the model is in the level flight state when the elastic potential energy of the four-cable mount system is minimized. A feedback control design method is proposed based on the Lyapunov stability theory to derive the closed-loop stability conditions. The system dynamics model that includes the aircraft rigid body model, flexible cables, pulleys, springs, aerodynamic model, and servo motor control is established using the flexible multibody dynamics method. A multibody dynamics solver and Simulink are used to simulate the attitude adjustment of the model in the wind tunnel and verify the supercritical bifurcation characteristics of the system and the effectiveness of the feedback and feedforward control.     

Review on ultra-lightweight flapping-wing nano air vehicles:Artificial muscles,flight control mechanism,and biomimetic wings

Flying insects are capable of flapping their wings to provide the required power and control forces for flight. A coordinated organizational system including muscles, wings, and control architecture plays a significant role, which provides the sources of inspiration for designing flapping-wing vehicles. In recent years, due to the development of micro-and meso-scale manufacturing technologies, advances in components technologies have directly led to a progress of smaller Flapping-Wing Nano Air V...     

民机新一代驾驶舱显示技术

在研究最新大型民用客机驾驶舱显示技术及平视显示器、电子飞行包、视景增强、合成视景等一系列新兴在研技术基础上,提出新一代驾驶舱显示技术的构想。新一代驾驶舱显示技术将以形象化的信息表达能力为基础,显示更丰富的周围环境,以达到降低飞行员工作量及提高飞行员情景意识和态势感知能力的目的。     

An intelligent approach for flight risk prediction under icing conditions

Flight risk prediction is significant in improving the flight crew’s situational awareness because it allows them to adopt appropriate operation strategies to prevent risk expansion caused by abnormal conditions, especially aircraft icing conditions. The flight risk space representing the nonlinear mapping relations between risk degree and the three-dimensional commanded vector(commanded airspeed, commanded bank angle, and commanded vertical velocity) is developed to provide the crew with practi...     

基于民航校验飞机的星基增强服务性能评估CSCD

为了进一步拓展全球卫星导航系统(GNSS)在民用航空等高生命安全领域的应用,世界各国争相发展星基增强系统(SBAS),美欧等SBAS已正式向民用航空领域提供了决断高度200英尺(约60.96m)的垂直导航信标性能(LPV-200)服务。我国的BDSBAS也已经完成系统建设,将向中国及周边区域提供满足国际民航组织(ICAO)一类垂直引导进近(APV-I)指标要求的单频增强服务。重点针对单频增强服务性能评估开展研究工作,首先从定位精度、完好性、可用性和连续性四个方面对星基增强服务评估方法进行了论述;再通过多次航空飞行试验对BDSBAS单频增强服务性能进行了验证,结果表明,航空飞行试验期间可满足APV-I设计指标要求;最后对BDSBAS单频增强服务在全国301个中大型机场的可用性进行了分析,非精密进近(NPA)可用性、APV-I可用性、LPV-200可用性在全国机场的覆盖率分别达到了97%、89.7%和83.1%。     

Locally generalised multi-agent reinforcement learning for demand and capacity balancing with customised neural networks

Reinforcement Learning (RL) techniques are being studied to solve the Demand and Capacity Balancing (DCB) problems to fully exploit their computational performance. A locally generalised Multi-Agent Reinforcement Learning (MARL) for real-world DCB problems is proposed. The proposed method can deploy trained agents directly to unseen scenarios in a specific Air Traffic Flow Management (ATFM) region to quickly obtain a satisfactory solution. In this method, agents of all flights in a scenario form a multi-agent decision-making system based on partial observation. The trained agent with the customised neural network can be deployed directly on the corresponding flight, allowing it to solve the DCB problem jointly. A cooperation coefficient is introduced in the reward function, which is used to adjust the agent’s cooperation preference in a multi-agent system, thereby controlling the distribution of flight delay time allocation. A multi-iteration mechanism is designed for the DCB decision-making framework to deal with problems arising from non-stationarity in MARL and to ensure that all hotspots are eliminated. Experiments based on large-scale high-complexity real-world scenarios are conducted to verify the effectiveness and efficiency of the method. From a statistical point of view, it is proven that the proposed method is generalised within the scope of the flights and sectors of interest, and its optimisation performance outperforms the standard computer-assisted slot allocation and state-of-the-art RL-based DCB methods. The sensitivity analysis preliminarily reveals the effect of the cooperation coefficient on delay time allocation.     

Novel roll effector based on zero-mass-flux dual synthetic jets and its flight test

The autonomous and controllable Dual Synthetic Jet Actuator (DSJA) is firstly integrated into the Unmanned Aerial Vehicle (UAV), and flight tests without the deflection of rudders are carried out to verify the viability of DSJA to control the attitudes of UAV during cruising. DSJA is improved into an actuator with two diaphragms and three cavities, which has higher energy levels. Actuators, differentially distributed on both sides of the wings, are installed on the trailing edge close to the wing tips. Flight tests, containing Differential Circulation Control (DCC) using double-side actuators, Positive Circulation Control (PCC) using left-side actuators and Negative Circulation Control (NCC) using right-side actuators, are implemented at cruising speed of 25 m/s. Results show that roll attitude control without rudders could be realized by DSJAs. DCC and NCC can generate the rightward roll and yaw angular velocity, prompting UAV to turn right. The stronger controlling ability can be achieved by DCC, with the maximum roll angular velocity of 15.62 (°)/s. PCC can generate a rightward roll moment, but a leftward yaw moment will be produced at the same time. Leftward yaw induces the leftward rolling moment, which weakens the roll control effect, making UAV keep to yaw to the left with a small slope.     

Enhanced ultrasonic total focusing imaging of CFRP corner with ray theory-based homogenization technique

Ultrasonic testing is effective in defect characterization and quality assurance of Carbon Fiber Reinforced Plastic (CFRP) components in the aerospace industry. Due to the coupling between complex shape and elastic anisotropy, the Phased Array Ultrasonic Testing (PAUT) and time-based Total Focusing Method (TFM) face significant challenges in the calculation of wave propagation. A wave velocity distribution model is established for a multidirectional convex corner of CFRP based on a homogenization theory and the above coupling effects are also incorporated. A ray-tracing method is proposed based on Dijkstra’s shortest path search algorithm. The predicted time of flight ensures that this technique, the homogenized TFM, could synthesize a high-quality focused image by post-processing on the full matrix capture data. Experiments on a laminate with three ?1.5 mm Side-Drilled Holes (SDHs) in different circumferential directions confirm a successful homogenized TFM imaging that all SDHs can be effectively detected. As compared to the isotropic scenario, the maximum positioning error is reduced to 0.12, 0.08, and 0.38 mm, and the Signal-to-Noise Ratios (SNRs) are increased by 2.1, 1.1, and 11.8 dB, respectively. It is suggested that the ray-tracing assisted TFM technique can effectively improve the imaging of corners in CFRP components.