基于航材保障工程的初始航材推荐清单研究

航材保障是航空公司成本控制最为重要的方面之一,合理的航材保障水平可以降低采购成本、减少库存,从而提高航空公司的综合竞争力。从工程实际应用出发,介绍了航材保障工程的重要意义,基于新机型初始运营的特殊需求,着重探讨了初始航材推荐清单编制的一般方法,并通过具体实例验证了该编制方法的有效性和实用性,可用于指导航空公司初始航材保障工程。     

基于改进匈牙利算法的航空企业动态调度方法研究

航空零件生产调度时,应尽量满足多目标和实时性的要求。结合某航空制造企业的实际生产情况,提出一种基于"穷尽成对比较"技术和改进匈牙利算法的动态调度方法。首先以航空零件调度时的最大完工时间、生产加工成本以及生产能耗为优化目标,构建柔性作业车间多目标动态调度数学模型;然后利用基于"穷尽成对比较"技术的权重参数调节模型对数学模型中各个目标的权重参数进行实时动态调整;最后以各个目标的加权值为总目标,采用改进匈牙利算法求得工序的最优分配结果。结果表明:与传统的动态调度方法相比,动态调度方法能够有效地提高航空企业的生产效率、减少航空企业的生产加工成本并降低对环境的污染,具有较好的综合调度性能。     

改进BA优化的MKSVDD航空发动机工作状态识别

为了提高航空发动机工作状态识别准确率和效率,避免人工识别中存在的误判和耗时耗力问题,提出了基于混沌脉冲蝙蝠算法（CRBA）优化的多核支持向量数据描述（CRBA-MKSVDD）智能识别方法。研究了多核支持向量数据描述（MKSVDD）改进策略,引入混沌脉冲发射率提高了蝙蝠算法（BA）的收敛速度和收敛精度,得到了CRBA;通过CRBA优化MKSVDD的惩罚因子和核参数,同时对飞参数据进行了特征提取;基于特征飞参数据训练了CRBA-MKSVDD分类器,并对某型发动机一个飞行架次的工作状态进行了识别。结果表明,该方法识别准确率达到97.547 9%,可用于与发动机工作状态的相关研究和应用。      

载人深空探测活动中的尿液处理回收技术分析

生物再生生命保障系统(Bioregenerative Life Support System,BLSS)是人类进行深空探测活动,实现长期载人空间飞行必需的关键技术,对于太空的探索开发具有重要意义。在BLSS系统内,航天员尿液废水的处理回收是非常重要的一部分。将尿液中所含有的大量的水分和丰富的营养物质回收用于系统内植物生长所需营养液的配制,既可以保证植物的正常生长,也有助于实现系统内物质的循环利用进而提高BLSS的闭合度。尿液中所含的大量盐分会威胁植物生长,所以需通过一定的技术手段处理尿液废水并回收其中的水分和营养。为了探索适用于BLSS中的尿液处理回收技术,首先分析了几种面向空间站应用的尿液处理技术,如蒸馏技术等;然后基于回收营养物质的需求,分析了面向民用的、发展较为成熟的尿液处理回收技术,如离子交换吸附技术、氨气吹脱技术和鸟粪石沉淀技术,并讨论了这些尿液处理回收技术在BLSS中的应用前景。最后基于BLSS的实际需求,提出了有望用于BLSS中的尿液处理回收技术流程。     

基于改进控制策略与动态无功支撑相结合的高电压穿越方法研究

针对双馈风力发电机高电压穿越问题,利用Laplace变换对电网电压骤升时电磁暂态过渡过程进行分析,得出定子电流不仅含有直流分量,还包含有工频交流成分,并通过仿真频谱验证了理论分析的正确性。不同于常规研究中只在转子电压方程考虑定子磁链的动态变化,而忽略了其对功率外环的影响,分析了定子磁链动态变化对有功、无功解耦的影响,在此基础上对功率外环进行传统矢量控制策略的改进。此外,考虑并网规范对机组无功电流支撑的要求,控制换流器输出与电网电压骤升幅度相匹配的无功电流,帮助故障电网快速恢复。仿真结果表明,该方案不仅能够保证电网电压骤升时双馈机组不脱网运行,而且也满足并网规范对机组无功电流输出的要求,实现高电压穿越。     

基于内模原理的复杂挠性卫星姿态控制研究

首先对具有运动挠性附件的航天器的姿态动力学模型进行了简要讨论和分析,证明了对于受步进扰动的复杂挠性卫星系统,采用输出反馈PD控制仅能得到一致有界稳定的结论。为了获得闭环系统的渐近稳定性能,进一步构造了具有内模补偿的PD控制系统,并且根据Lyapunov理论给出了严格证明。基于美国GOES 8号静止轨道气象卫星公布的动力学参数,对PD控制及含有内模补偿的PD控制两类控制器进行了仿真对比,以校验所设计控制系统的有效性。最后,进行了总结并提出进一步的研究设想。     

柔性绳网动力学建模与天地差异性分析

采用有限元模型研究了柔性绳网系统的动力学特性。针对空间绳网直接弹射展开方式,首先将绳网离散为若干单元,各单元处理为非线性“半阻尼弹簧”模型,然后分别计算各单元所受气动力和重力,最终建立绳网系统多柔体动力学模型。基于所建立的动力学模型分别对柔性绳网在地面和太空展开的动力学过程进行了仿真分析,研究了绳网在展开面积、空间位形和飞行距离等方面的天地差异性及其动力学机理,为未来空间绳网系统的分析设计提供理论参考。     

Behavior of tethered debris with flexible appendages

Active exploration of the space leads to growth of a near-Earth space pollution. The frequency of the registered collisions of space debris with functional satellites highly increased during last 10 years. As a rule a large space debris can be observed from the Earth and catalogued, then it is possible to avoid collision with the active spacecraft. However every large debris is a potential source of a numerous small debris particles. To reduce debris population in the near Earth space the large debris should be removed from working orbits. The active debris removal technique is considered that intend to use a tethered orbital transfer vehicle, or a space tug attached by a tether to the space debris. This paper focuses on the dynamics of the space debris with flexible appendages. Mathematical model of the system is derived using the Lagrange formalism. Several numerical examples are presented to illustrate the mutual influence of the oscillations of flexible appendages and the oscillations of a tether. It is shown that flexible appendages can have a significant influence on the attitude motion of the space debris and the safety of the transportation process.     

Effects of uncertainties and flexible dynamic contributions on the control of a spacecraft full-coupled model

One of the most important problems for performing a good design of the spacecraft attitude control law is connected to its robustness when some uncertainty parameters are present on the inertial and/or on the elastic characteristics of a satellite. These uncertainties are generally intrinsic on the modeling of complex structures and in the case of large flexible structures they can be also attributed to secondary effects associated to the elasticity. One of the most interesting issues in modeling large flexible space structures is associated to the evaluation of the inertia tensor which in general depends not only on the geometric ‘fixed’ characteristic of the satellite but also on its elastic displacements which of course in turn modify the ‘shape’ of the satellite. Usually these terms can be considered of a second order of magnitude if compared with the ones associated to the rigid part of a structure. However the increasing demand on the dimension of satellites due to the presence for instance of very large solar arrays (necessary to generate power) and/or large antennas has the necessity to investigate their effects on their global dynamic behavior in more details as a consequence. In the present paper a methodology based on classical Lagrangian approach coupled with a standard Finite Element tool has been used to derive the full dynamic equations of an orbiting flexible satellite under the actions of gravity, gravity gradient forces and attitude control. A particular attention has been paid to the study of the effects of flexibility on the inertial terms of the spacecraft which, as well known, influence its attitude dynamic behavior. Furthermore the effects of the attitude control authority and its robustness to the uncertainties on inertial and elastic parameters has been investigated and discussed.     

多分量雷达辐射源信号的检测与分离

针对多分量雷达辐射源信号难以有效检测与分离的问题,提出了时频变换结合时变滤波的方法。通过图像分割中的区域生长法在时频平面对各分量进行检测,对其中的线性调频分量采用分数阶傅里叶变换进行优先分离,再对时频或频域没有耦合的分量进行滤波,最后通过支持向量机划分分类线,用于时频耦合分量的分离。仿真实验结果表明,该方法可以对多分量信号进行有效的检测与分离。