金属橡胶减振器用于发动机安装减振的研究

 为减小发动机传递至飞机机身结构的振动,设计了金属橡胶减振器用于航空发动机安装。对该金属橡胶减振器进行了动力学建模研究,采用有限元技术对安装减振器前后的飞机全机结构进行了仿真分析,初步表明了该设计对结构频率影响较小,但能引入较大阻尼,降低响应水平。在理论分析基础上,进一步将设计制造的金属橡胶减振器安装于某型飞机,进行地面开车,实测了应用减振安装前后飞机的动力学响应。结果证明了发动机减振安装的可行性与有效性。     

Nonlinear Dynamics Behaviors of a Rotor Roller Bearing System with Radial Clearances and Waviness Considered

A rotor system supported by roller beatings displays very complicated nonlinear behaviors due to nonlinear Hertzian contact forces, radial clearances and bearing waviness. This paper presents nonlinear bearing forces of a roller bearing under four-dimensional loads and establishes 4-DOF dynamics equations of a rotor roller bearing system. The methods of Newmark-β and of Newton-Laphson are used to solve the nonlinear equations. The dynamics behaviors of a rigid rotor system are studied through the bifurcation, the Poincar è maps, the spectrum diagrams and the axis orbit of responses of the system. The results show that the system is liable to undergo instability caused by the quasi-periodic bifurcation, the periodic-doubling bifurcation and chaos routes as the rotational speed increases. Clearances, outer race waviness, inner race waviness, roller waviness, damping, radial forces and unbalanced forces-all these bring a significant influence to bear on the system stability. As the clearance increases, the dynamics behaviors become complicated with the number and the scale of instable regions becoming larger. The vibration frequencies induced by the roller bearing waviness and the orders of the waviness might cause severe vibrations. The system is able to eliminate non-periodic vibration by reasonable choice and optimization of the parameters.     

弱引力下小行星动量驱动机器人的可控跳跃行为

以小行星表面着陆探测为背景,提出一种动量驱动机器人(MoRo)以满足弱引力复杂环境下的探测需求。该机器人利用弱引力环境下的摩擦和碰撞特性,通过主动辨识环境参数,规划和控制动量轮以产生期望的驱动力矩,完成可控性跳跃及腾空后的稳定拍照等任务。首先,基于MoRo的动量轮刹车机构特性,分析了MoRo在弱引力环境下的跳跃机理并对其跳跃方式进行了规划;接着考虑动量轮驱动机构三闭环伺服系统的非线性特性,基于Herze碰撞模型和Karnopp摩擦模型建立了MoRo在小行星表面的跳跃行为动力学模型;其次,使用机器学习算法建立环境参数和MoRo运动的函数关系,并基于环境参数规划动量轮转速实现跳跃距离和腾空高度的可控。最后,通过数值仿真校验了MoRo跳跃规划方法和控制方法的可行性。     

Time suboptimal formation flying manoeuvres through improved magnetic charged system search

The development of fast and reliable optimization algorithms is required in order to obtain real-time optimal trajectory on-board spacecraft. In addition, the wide spread of small satellites, due to their low costs, is leading to a greater number of satellite formations in space. This paper presents an Improved version of the Magnetic Charged System Search (IMCSS) metaheuristic algorithm to compute time-suboptimal manoeuvres for satellite formation flying. The proposed algorithm exploits some strategies aimed at improving the convergence to the optimum, such as the chaotic local search and the boundary handling technique, and it is able to self-tune its internal parameters and coefficients. Moreover, the inverse dynamics technique and the differential flatness approach, through the B-splines curves, are used to approximate the trajectory. The optimization procedure is applied to the circular J2 relative model developed by Schweighart and Sedwick and to the elliptical relative motion model developed by Yamanaka and Ankersen. The results of this paper show that the convergence is better achieved by using the proposed tools, thus proving the efficiency and reliability of the algorithm in solving some space engineering problems.     

Multiple hierarchy risk assessment with hybrid model for safety enhancing of unmanned subscale BWB demonstrator flight test

To explore the low-speed characteristics of the Blended-Wing-Body (BWB) configuration for future civil aircraft, a series of unmanned subscale demonstrators have been developed and tested by our research team. During this process, specific safety risks deriving from uncertain design features, system unreliability, and insufficient personnel experience caused continuous flight test mishaps and the risk mechanism was not clear. Local and trial-and-error learning driven safety improvements took few effects on mishap prevention, so our focus was turned to look for systematic safety strategies. This paper establishes a systems theory based hybrid model to integrate the physical system reliability analysis techniques with the system dynamics method for illustrating the multiple risk interactions of the demonstrator flight test involving organizational, human resource and technical system factors. Using the prior BB-5 demonstrator as a case, the hybrid model simulation represents its historical risk evolution process, which verifies the model rationality. Derived risk control strategies reduced the mishap rate of a new demonstrator called BB-6 Sprit. The paper also shows the extended hybrid model can be applied on safety management of unmanned aerial vehicles from the initial period of vehicle development.     

非结构CFD软件MPI+OpenMP混合并行及超大规模非定常并行计算的应用

常规工程应用中，非定常数值模拟（如多体分离）的计算量十分巨大，如果为了达到更高的计算精度，加密网格或者采用高精度方法将会使得计算量进一步增大，导致非定常数值模拟在CFD工程应用中成为十分耗时和昂贵的工作，因此，提高非定常数值模拟的可扩展性和计算效率十分必要。为充分发挥既有分布内存又有共享内存的多核处理器的性能和效率优势，对作者团队开发的非结构网格二阶精度有限体积CFD软件（HyperFLOW）进行了混合并行改造，在计算节点间采用MPI消息传递机制，在节点内采用OpenMP共享内存的MPI+OpenMP混合并行策略。首先分别实现了两种粒度（粗粒度和细粒度）的混合并行，并基于国产in-house集群采用CRM标模（约4 000万网格单元）定常湍流算例对两种混合并行模式进行了测试和比较。结果表明，粗粒度在进程数和分区数较少的小规模并行时具有效率优势，16线程时效率较高；而细粒度混合并行在大规模并行计算时具有优势，8线程时效率较高。其次，验证了混合并行在非定常计算情况下的可扩展性，采用机翼外挂物投放标模算例，分别生成3.6亿和28.8亿非结构重叠网格，采用对等的（P2P）网格读入模式和优化的重叠网格隐式装配策略，网格读入和重叠网格装配耗时仅需数十秒；采用3.6亿网格，完成了非定常状态效率测试及非定常分离过程的湍流流场计算，在in-house集群上12 288核并行效率达到90%（以768核为基准），在天河2号上12 288核并行效率达到70%（以384核为基准），数值模拟结果与试验结果符合良好。最后，在in-house集群上采用28.8亿非结构重叠网格进行了4.9万核的并行效率测试，结果显示，4.9万核并行效率达到55.3%（以4 096核为基准）。     

Fault-tolerant control and vibration suppression of flexible spacecraft: An interconnected system approach

This paper considers a fault-tolerant control and vibration suppression problem of flexible spacecraft. The attitude dynamics is modeled by an interconnected system, in which the rigid part and the flexible part are coupled with each other. Such a model allows us to use the interconnected system approach to analyze the flexible spacecraft. Both distributed and decentralized observer-based fault-tolerant control schemes are developed, under which the closed-loop stability of flexible spacecraft can be ensured by using the cycle-small-gain theorem. Compared with the traditional method, this paper considers the faults occurred not only in the rigid parts, but also in the flexible parts. In addition, the application of the interconnected system approach simplifies the system model of flexible spacecraft, thereby the difficulty of theoretical analysis and engineering practice of fault-tolerant control of flexible spacecraft are greatly reduced. Simulation results show the effectiveness of the proposed methods and the comparison of different fault-tolerant control approach.     

柔性转子逆回旋振动特性的研究

论述了具有陀螺效应的柔性转子在各向异性支承条件下回旋振动的特性，推导出了转子在正回旋激励作用下产生逆回旋振动的条件，提出转子振动存在逆回旋带的概念，并举例说明了转子在整个转速范围和振动频率范围内回旋振动的特点，作出了逆回旋带的曲线图。     

碱金属引射下的高超声速尾流的数值模拟

高超声速化学非平衡尾流的分析与计算是空气动力学中的一个重要课题。本文采用二阶精度的中心差隐格式，求解了抛物化的Ｎ－Ｓ方程，得到了高空２０ＫＭ及６０ＫＭ非平衡尾流的数值解，研究了碱金属引射对尾流电子密度的影响。计算结果表明引射碱金属对尾流电子密度影响明显，尾流电子密度因此增加了１～３个量级。文中化学反应模型采用十组元模型，组元包括Ｏ２、Ｎ２、Ｏ、Ｎ、ＮＯ、ＮＯ＋、Ｏ－２、Ｎａ、Ｎ＋ａ以及ｅ－。     

用于计算机模拟超塑成形的材料参数测定(英文)

为了借助计算机分析和模拟复杂的超塑成形过程,本文提出了一个用于测定超塑性金属材料参数m和K的等胀形高度法,并在文中推导了与该法相关的公式.通过应用在模拟薄板超塑胀形过程中的计算实例,证明该法的 精度是令人满意的.